• 한국소음진동공학회논문집
• /
• 제24권10호
• /
• pp.770-779
• /
• 2014

In this study, a numerical estimation method for 3D underwater radiated noise pattern using hull vibration and total acoustic power of the vibrating structure in the far-field is proposed. The underwater radiated noise pattern is known to be predicted using the vibration signals and radiation efficiency of each surface patch. But it is very difficult to know radiation efficiency of each surface patch which is one of important factors to calculate the 3D underwater radiated noise pattern. Instead of using radiation efficiency of each patch, the underwater radiated noise level is modified with the total acoustic power of the vibrating structure. The suggested estimation method for underwater radiated noise pattern is discussed with numerical model.

• 한국음향학회지
• /
• 제43권2호
• /
• pp.145-151
• /
• 2024

함정 선체부착형 수동소나체계는 최근 표적탐지성능을 향상시키고자 함내 진동유기 소음을 제거하려는 연구가 활발히 진행중이다. 본 연구진은 신호처리의 관점에서 음향센서와 진동센서가 설치된 복합센서를 이용한 음향-진동 정합기법을 개선책으로 제시한다. 본 논문에서는 정합기법의 이론적 배경에 대해 기술한 후, 그것이 다중물리 유한 요소해석 상에서 실현됨을 보였다. 나아가 정합기법을 센서 시스템에 적용할 시의 표적신호 수신감도 상승 및 진동유기 소음 제거 성능을 산출하였으며, 정합기법의 실용성과 향후 연구방향에 대해 논하였다.

• 한국음향학회지
• /
• 제38권2호
• /
• pp.193-199
• /
• 2019

본 논문에서는 선체부착형 음향센서의 플랫폼 진동유기 소음 차단 특성을 확인하기 위한 수중 진동 실험을 수행하고 결과를 분석하였다. 음향수조 환경에서 음향센서가 설치된 선체모사구조물과 가진기를 이용하여 플랫폼 진동유기 소음 조건을 구현하였고, 선체모사구조물 및 음향센서에 설치된 표준 가속도계와 음향센서의 출력신호 측정을 통해 음향센서의 진동차단율, 삽입손실 및 진동민감도와 같은 성능지수를 산출하였다. 산출된 성능지수 결과를 토대로 음향센서의 주파수별 소음 차단 특성을 분석하고 실험 기법의 유효성을 검토하였다.

• 대한조선학회논문집
• /
• 제55권4호
• /
• pp.341-349
• /
• 2018

Recently, it has been reported that the whipping response, which is the elastic phenomenon of the ship, may be one of the causes of the ship accident. Unfortunately, the commonly used methodology for evaluating the whipping effect effectively has not been developed yet. In this study, we developed a procedure to estimate the whipping effect of hull in actual design stage. Fluid-structure interaction analysis was performed for a dominant short term sea state to obtain the time series data of vertical wave bending moment including the whipping response by slamming. In order to estimate the whipping effect by using the time series, some signal processing and statistical techniques such as low pass filtering, Weibull fitting and so on, were applied. the hydro-elasticity analysis was performed on container ships of various sizes to evaluate the whipping effect. The parameters that can affect the response of the hull vibration was selected and the effect of these parameters on whipping was analyzed.

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.482-493
• /
• 2016

The identification of modal damping of a segmented hull model with torsional response is difficult task due to the coupling of modal response. This is because the 1st and 2nd torsional vibration modes are closely spaced in frequency domain leading to the situation that the modal decomposition is difficult to achieve by simple band-pass filter. Present study applied several different modal decomposition methods to derive the damping ratio of different modes. The modal decomposition methods considered in this study are simple band-pass filter, Hilbert vibration decomposition, Wavelet transform and proper orthogonal decomposition. Coupled free decay signal obtained from the torsional hammering test on a segmented hull model was processed with four different methods and the derived damping ratios were compared with each other. Discussions also have been made on the pros and cons of the different methodologies.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.979-994
• /
• 2015

The mode shapes of a segmented hull model towed in a model basin were predicted using both the Proper Orthogonal Decomposition (POD) and cross random decrement technique. The proper orthogonal decomposition, which is also known as Karhunen-Loeve decomposition, is an emerging technology as a useful signal processing technique in structural dynamics. The technique is based on the fact that the eigenvectors of a spatial coherence matrix become the mode shapes of the system under free and randomly excited forced vibration conditions. Taking advantage of the simplicity of POD, efforts have been made to reveal the mode shapes of vibrating flexible hull under random wave excitation. First, the segmented hull model of a 400 K ore carrier with 3 flexible connections was towed in a model basin under different sea states and the time histories of the vertical bending moment at three different locations were measured. The measured response time histories were processed using the proper orthogonal decomposition, eventually to obtain both the first and second vertical vibration modes of the flexible hull. A comparison of the obtained mode shapes with those obtained using the cross random decrement technique showed excellent correspondence between the two results.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.43-50
• /
• 2017

Acoustic tiles are typically installed on the surface of pressure vessels in submarines to minimize echoes based on the ship's own noise and active sonar. In this study, we studied low frequency active echo reduction techniques to reduce underwater target echo signals. Active control algorithms using tile type projectors and FxLMS logic have been developed and the projectors have been installed in the assumed hull structure. The effectiveness of projectors and control algorithms has been evaluated in time and frequency domain analysis through experiments in the tank.

• 한국군사과학기술학회지
• /
• 제24권5호
• /
• pp.545-557
• /
• 2021

Engine is the main source of vibration that generates unwanted noise and vibration of vehicle chassis. Especially, in submarine applications, radiation of noise signatures can be detected at some distance away from the submarine using a sonar array. Thus quiet operation is crucial for submarine's survivability. This study addresses reduction of the force transmissibility originating from engines and transmitted to hull through engine mounts. An inertial damper, as an actuator of hybrid mount system, is addressed to reduce even further the level of vibration. Narrow band FxLMS algorithms are broadly used to cancel the vibration of engine mount because of its excellent performance of canceling narrow band noise. However, in real active dampers, the maximum displacement of damper mass is kinematically restricted. When the control input signal from the FxLMS algorithm exceeds this limitation, the damper mass will collide with the mechanical stops and results in many problems. Originated from these, a modified narrow band FxLMS algorithm based on the equalizer technique with the maximum allowable displacement of active damper mass is proposed in this study. Some simulation results showed that the propose algorithm is effective to suppress vibration of engine mount while ensuring given displacement constraint.

• 대한조선학회논문집
• /
• 제55권1호
• /
• pp.37-44
• /
• 2018

To understand the dynamic characteristics of the vessel with hydroelastic response, it is very important to estimate the dynamic modal parameters such as mode shapes, natural frequency, and damping ratio. These dynamic modal parameters of full scale ship are a priori unknowns, hence to be estimated directly based upon the full scale measurement data. In this paper, dynamic modal parameters were extracted by signal processing of acceleration and strain data measured from a large container ship whose loading capacity is 9400TEU. The mode shapes of the vibrating hull were identified using the proper orthogonal decomposition and the vibration response of hull was decomposed into its modal magnitudes. Natural frequencies of specific modes were derived via Fourier transform of these modal magnitude. Also, the free decay signal of the vibrating hull was obtained through the random decrement technique and the damping ratio was estimated with accuracy.

• 한국음향학회지
• /
• 제16권2호
• /
• pp.10-15
• /
• 1997

수중 청음기는 진동하는 물체 위에 설치되어 다양한 외부 잡음 원이 유입되는 환경에 노출되어 있다. 외부 잡음 원으로는 수중 청음기가 설치된 구조물 자체의 진동, 프로펠러 잡음, 그리고 유동 유기 잡음들이 있고, 이들 외부 잡음원은 실제 강도가 상당히 높아서 센서의 정확한 작동에 장애가 되고 있다. 본 연구에서는 외부 잡음에 무관한 고 정밀도, 저 잡음 특성을 갖는 수중 청음기를 개발하기 위하여 유한 요소법(FEM)을 사용하여 잡음 전달 특성의 분석 및 air pocket과 음향 감쇠층의 다양한 조합으로 이루어진 개선된 구조의 수중 청음기를 설계하고, 내 잡음성 평가를 하였다. 그 결과 센서 측면 하단부에 잡음 원이 위치할 경우 가장 큰 잡음 신호로 작용하므로 구조를 변경한 결과 기존 수중 청음기에 비해 59% 이상 내 잡음성을 증진 시켰다.