• 수산해양기술연구
• /
• 제53권4호
• /
• pp.446-455
• /
• 2017

The improvement of resistance performance for the 4.99 ton class fishing boats was shown. The 4.99 ton fishing boats are the most commonly used one in the Korean coastal region. The evaluation of resistance performance was estimated by the Computational Fluid Dynamics (CFD) analysis. The CFD simulation was performed by the validation for various types of bow shapes on the hull. The optimized hull form from the simulation was selected and showed the best resistance performance. This hull type was tested on the towing tank in the National Institute of Fisheries Science (NIFS). The effective horsepower (EHP) was estimated by the resistance test on the towing tank with the bare hull condition. The drag force on the three service speed conditions was obtained for the resistance analysis to power prediction. The measured drag forces are compared with the results from the CFD simulation with one another. As results of the model tests, it was confirmed that the shape of the bow is an important factor in the resistance performance. The effective horsepower decreased about 30% in comparison with the conventional hull form. Also, the resistance performance improved the reduction of required horsepower, which especially contributed to the energy-saving for the fisheries industry. In the CFD analysis, the resistance performance improved slightly. In this case, the ratio of the residual resistance ($C_R$) in the total resistance ($C_T$) was high. Therefore, the CFD analysis was not enough to satisfy with reflection for the free surface and wave form in the CFD procedure. Both model test and CFD calculation in this study can be applied to the initial design process for the coastal fishing vessel.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권4호
• /
• pp.316-322
• /
• 2017

본 논문의 주 목적은 수치해석 도구를 활용하여 저항성능 관점에서 우수한 선형을 개발하는 것이다. 최종 개발된 선형의 성능 평가를 위해 수조 모형시험을 수행하였다. 현존선은 도면을 바탕으로 실물과 도면의 타당성 검토를 위해 실태조사를 수행하였다. 실태조사 시에 실제 운항 상태인 주 운항 배수량 및 주 운항 선속을 확인하였다. 수치해석을 바탕으로 현존선의 저항성능을 검토하였다. 개발선은 선수어깨의 파형개선, 배수량 분포의 균형화, 단면형상의 수정 그리고 중앙 스케그의 크기와 형상 변경에 관한 스터디를 통해 도출되었다. 수치해석 결과 개발선은 조파저항 개선에 의해 저항성능 관점에서 주 운항 선속인 11노트에서 약 15% 개선된 양을 보여주었다(Table 4 참조). 개발된 선형의 성능 평가를 위해서 수조 모형시험을 수행하였으며 그 결과 11노트에서 약 17% 개선된 양을 보여주었다(Table 5 참조).

• 수산해양기술연구
• /
• 제33권4호
• /
• pp.259-265
• /
• 1997

The new concept of hull form for G/T 19 ton class off-shore long liner was studied with the support of special research fund of Korean Ministry of Science and Technology. Newly developed hull form of semi-twin afterbody combined with part. curvilinear type forebody shows outstanding improvement in resistance performance point of view compared with hard chine form, especially at the range of high speed.

• 해양환경안전학회지
• /
• 제22권2호
• /
• pp.246-252
• /
• 2016

본 연구에서는 연안의 해저면에 누적된 퇴적오염물을 효율적으로 수거할 수 있는 저속 쌍동형 정화선에 대한 선수선형의 개념설계에 대해 수행하였다. 선형설계는 선체건조가 용이하도록 단순화하였으며, 쌍동선 선형의 선수 Water line, 선수각 등의 변화에 따른 저항성능의 영향을 검토하였다. Ansys CFX를 이용한 수치시뮬레이션과 회류수조에서의 모형시험결과와의 비교/분석 등을 통하여 선수부 선형변화에 따른 저항성능과 자유표면 유동특성 사이의 관계를 고찰하였으며, 그 결과 선수재 위치와 어깨부 체적의 선수부 이동에 따른 파형개선으로 조파저항이 감소하는 등 저항성능의 향상을 확인하였다.

• 한국전산유체공학회지
• /
• 제8권2호
• /
• pp.42-48
• /
• 2003

The issues associated with the application of CFD for ship design are addressed. Doubtlessly at the moment, CFD tools are very useful in evaluating hull forms prior to traditional towing tank tests. However, time-consuming pre-processing is an obstacle in the daily application of CFD tools to improve hull forms. The accuracy of computational modeling without sacrificing the usability of CFD system is also to be assessed. The wave generation is still predicted by using potential panel methods, while velocity profiles entering into propeller plane is solved using turbulent flow solvers. The choice of turbulence model is a key to predict nominal wake distribution within acceptable accuracy. The experimental data for CFD validation are invaluable to improve physical and numerical modeling. Other applications of CFD for ship design than hull form improvement are also given. It is certain that CFD can be a cost-effective tool for the design of new and better ships.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.5-8
• /
• 2002

The issues associated with the application of CFD for ship design are addressed. It is quite certain that the CFD tools are very useful in evaluating hull forms a prior to traditional towing tank tests. However, the time-consuming pre-processing is an obstacle in the daily application of CFD tools to improve hull forms. The accuracy of computational modeling without sacrificing the usability of CFD system is also to be assessed. The wave generation is still predicted by using potential panel methods, while velocity profiles entering into propeller plane is solved using turbulent flow solvers. The choice of turbulence model is a key to predict nominal wake distribution within acceptable accuracy. The experimental data for CFD validation are invaluable to improve physical and numerical modeling. Other applications of CFD for ship design than hull form improvement are also given. It is certain that CFD can be a cost-effective tool for the design of new and better ships.

• 수산해양교육연구
• /
• 제26권4호
• /
• pp.686-694
• /
• 2014

Research on ship motion and seasickness is recognized as the important research area to ensure the pleasant operative environment in addition to the research of operation safety of ship. In this paper, The motion performance in waves for the training ship Kaya of Pukyong National University is obtained by using the computer program based on Strip method. To guarantee the pleasant seafaring in ocean, the vertical acceleration of ship motion is calculated according to the hull form modification. The results of calculation by changes of hull form are compared with the guideline of MSI(Motion Sickness Incidence). The degree of motion sickness is shown and discussed through the comparison between calculated vertical acceleration spectrum and MSI guideline.

• 해양환경안전학회지
• /
• 제23권4호
• /
• pp.432-438
• /
• 2017

본 연구의 주목적은 기존선형을 바탕으로 연료 절감이 가능한 표준화된 개조선형을 개발하는 것이다. 설계 흘수와 설계 선속을 고려하여 대상선박의 선수부 형상을 검토하였다. 실제 운항 상태 별로 대상선박에 대하여 저항성능을 평가하였다. 상용 전산유체역학(CFD) 코드와 수조 모형시험 자료는 유효마력 평가를 위해 사용되었다. 실제 운항 상태를 고려하여 최소저항을 가지는 3가지 개조선형을 제시하였다. 제시된 개조선형은 고객이 선택가능 하다는 점에서 고객 맞춤형 기성품 선형이라고 명하였다. 개조선형 별로 실제 운항 상태에 따라 유효마력을 추정하였다. 가장 낮은 흘수에서 운항할 경우, 기존선형과 비교하여 볼 때 개조3 선형의 저항성능은 저속영역인 16~18노트에서 약 11~16 %로 향상된 결과를 보여 주었다. 중간 흘수인 8.3m에서 운항할 경우, 개조3 선형의 저항성능은 저속영역에서 기존선형보다 약 6~11 %로 향상된 결과를 보여 주었다. 가장 높은 흘수인 9.5m에서 운항할 경우, 모든 선형의 저항성능은 저속영역에서 큰 차이를 보이지 않았다.

• 수산해양기술연구
• /
• 제41권1호
• /
• pp.64-69
• /
• 2005

In spite of many efforts, in the design of high speed fishing vessel the sea-keeping performance improvement without neglection of resistance-propulsion performance by hull form itself has its limitations. In this paper, the development of sea-keeping improving appendage pitching and trim improver for high speed planing hull on behalf of the hull form of fishing vessel has been introduced. The developed appendage verified its effectiveness in the full scale test and also has been proved the better resistance performance in the model test and full scale test.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.459-479
• /
• 2014

This paper considers experimental and numerical studies on added resistance in waves. As the numerical methods, three different methods, strip method, Rankine panel method and Cartesian-grid method, are applied. The computational results of vertical motion response and added resistance are compared with the experimental data of Series 60($C_B=0.8$) hull, S175 containership and KVLCC2 hull. To investigate the influence of above-still water hull form, a Rankine panel method is extended to two nonlinear methods: weakly-nonlinear and weak-scatterer approaches. As nonlinear computational models, three ships are considered: original KVLCC2 hull, 'Ax-bow' and 'Leadge-bow' hulls. Two of the three models are modified hull forms of original KVLCC2 hull, aiming the reduction of added resistance. The nonlinear computational results are compared with linear results, and the improvement of computational result is discussed. As experimental approach, a series of towing-tank experiment for ship motions and added resistance on the three models (original KVLCC2 hull, 'Ax-bow' and 'Leadge-bow') are carried out. For the original KVLCC2 hull, uncertainty analysis in the measurement of vertical motion response and added resistance is performed in three waves conditions: ${\lambda}/L=0.5$, 1.1, 2.0. From the experimental results, the effects of hull form on added resistance are discussed.