DOI QR코드

DOI QR Code

Study on the Development of the Customized Ready-Made Hull Forms according to the Retrofit

선박개조에 따른 고객 맞춤형 기성품 선형 개발

  • Park, Dong-Woo (School of Naval Architecture & Ocean Engineering, Tongmyong University)
  • 박동우 (동명대학교 조선해양공학부)
  • Received : 2017.05.23
  • Accepted : 2017.06.28
  • Published : 2017.06.30

Abstract

The primary objective of the current work was to develop a standardized retrofit hull form capable of saving energy based on existing vessels. The bow shape of existing vessels was investigated, giving consideration to design draft and speed. Resistance performances were assessed for existing vessels according to operating conditions. Commercial CFD codes and model test materials were used for assessment of effective power. Three retrofit hull forms with minimum resistance were selected given real operating conditions. These vessels were named after customized ready-made hull forms to enable ship owners to make easier choices. The effective power of each vessel was estimated under real operating conditions. Subjects were operated with the lowest draft, and performance for retrofit No. 3 showed an 11-16% improvement in effective power at low speed ranges of 16-18 knots compared to existing vessels. When operated with a middle draft, performance for retrofit No. 3 showed a 6-11% improvement in effective power at low speed ranges compared to existing vessels. When operated with the highest draft, performance for all vessels showed little difference in effective power.

본 연구의 주목적은 기존선형을 바탕으로 연료 절감이 가능한 표준화된 개조선형을 개발하는 것이다. 설계 흘수와 설계 선속을 고려하여 대상선박의 선수부 형상을 검토하였다. 실제 운항 상태 별로 대상선박에 대하여 저항성능을 평가하였다. 상용 전산유체역학(CFD) 코드와 수조 모형시험 자료는 유효마력 평가를 위해 사용되었다. 실제 운항 상태를 고려하여 최소저항을 가지는 3가지 개조선형을 제시하였다. 제시된 개조선형은 고객이 선택가능 하다는 점에서 고객 맞춤형 기성품 선형이라고 명하였다. 개조선형 별로 실제 운항 상태에 따라 유효마력을 추정하였다. 가장 낮은 흘수에서 운항할 경우, 기존선형과 비교하여 볼 때 개조3 선형의 저항성능은 저속영역인 16~18노트에서 약 11~16 %로 향상된 결과를 보여 주었다. 중간 흘수인 8.3m에서 운항할 경우, 개조3 선형의 저항성능은 저속영역에서 기존선형보다 약 6~11 %로 향상된 결과를 보여 주었다. 가장 높은 흘수인 9.5m에서 운항할 경우, 모든 선형의 저항성능은 저속영역에서 큰 차이를 보이지 않았다.

Keywords

References

  1. Kim, I. S., D. W. Park and S. B. Lee(2016), Prediction of Fishing Boat Performance using Computational Fluid Dynamics. Journal of the Korean Society of Marine Engineering, Vol. 40, No. 7, pp. 574-579. https://doi.org/10.5916/jkosme.2016.40.7.574
  2. Park, D. W.(2014), A Study on the Speed Performance of a Medium Patrol Boat using CFD, Journal of Navitation and Port Research, Vol. 38, No. 6, pp. 585-591. https://doi.org/10.5394/KINPR.2014.38.6.585
  3. Park, D. W., S. B. Lee, S. S. Chung, H. W. Seo and J. W. Kwon(2013), Effects of Trim on Resistance Performance of a Ship, Journal of the Society of Naval Architects of Korea, Vol. 50, No. 2, pp. 88-94. https://doi.org/10.3744/SNAK.2013.50.2.88
  4. Park, G. Y. and K. H. Cho(2017), A study on the change of EEOI before and after modifying bulbous at the large container ship adopting low speed operation, Journal of the Korean Society of Marine Engineering, Vol. 41, No. 1, pp. 15-20. https://doi.org/10.5916/jkosme.2017.41.1.15
  5. Park, I. R., J. Kim and S. H. Van(2004), Analysis of Resistance Performance of Modern Commercial Ship Hull using a Level-set Method, Journal of the Society of Naval Architects of Korea, Vol. 41, No. 2, pp. 79-89. https://doi.org/10.3744/SNAK.2004.41.2.079
  6. Yang, J. M. and H. C. Kim(2005), Prediction of Propulsive Performance of VLCC at Heeled and Trimmed Conditions, Journal of the Society of Naval Architects of Korea, Vol. 42, No. 2, pp. 307-314. https://doi.org/10.3744/SNAK.2005.42.4.307
  7. Yang, J. M., S. H. Rhee and H. C. Kim(2006), A Study on the Effect of the Heeled and Trimmed Conditions on Propulsive Performance of VLCC, Journal of the Society of Naval Architects of Korea, Vol. 43, No. 3, pp. 275-284. https://doi.org/10.3744/SNAK.2006.43.3.275