• 한국소음진동공학회논문집
• /
• 제12권5호
• /
• pp.338-345
• /
• 2002

The study presents a new testing and analysis method for brake judder on vehicle. For the identification of the excitation mechanism of a brake judder, it is necessary to measure the dynamic brake disc geometry during braking on vehicle. The non-contact sensor system was used to monitor the brake disc geometry. Brake torque variation (BTV) caused by disc thickness variation (DTV) is the primary excitation for brake judder. The mechanical effects generating BTV are linked not only to initial manufacturing tolerances but also to uneven wear. Therefore, the brake disc geometry should be strictly managed to initial condition. The aim of this study has been to measure the dynamic DTV and runout on vehicle and analyze the influence of test parameters on brake judder and compare the disc component with vehicle matching about the DTV Profile. As a result of this study, The amplitude of brake judder is proportional to vehicle speed and fluid pressure fluctuation on braking. The major sources of brake judder are directly related to disc thickness variation and side runout variation of corner assembly (disc, hub. bearing).

• 한국태양에너지학회 논문집
• /
• 제34권1호
• /
• pp.1-7
• /
• 2014

A study on the available power of a wind turbine to be used for wind farm control was performed in this study, To accurately estimate the available power it is important to obtain a suitable wind which represents the three dimensional wind that the wind turbine rotor faces and also used to calculate the power. For this, two different models, the equivalent wind and the wind speed estimator were constructed and used for dynamic simulation using matlab simulink. From the comparison of the simulation result with that from a commercial code based on multi-body dynamics, it was found that using the hub height wind to estimate available power from a turbine results in high frequency components in the power prediction which is, in reality, filtered out by the rotor inertia. It was also found that the wind speed estimator yielded less error than the equivalent wind when compared with the result from the commercial code.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 춘계학술대회
• /
• pp.383-387
• /
• 2008

Nowadays, the tendency of world air cargo is noteworthy and air traffic in terms of cargo throughput will no doubt grow significantly in the new Region, with India and China's booming economy and the upcoming Olympics 2008. For example, in the first 11 months of 2006 cargo traffic was increased by 6.3%. First of all, the market of air cargo in Korea grows very quickly and diversifies. It is an essential factor in the process of development of Northeast-Asia as a hub for Air Cargo logistics. However the process of air cargo in Korea is complex as compared with other north-east asia nations. At the same time, it has many problems and causes inconvenience to owners of freight. This paper investigated the process of air cargo in Korea now and analyzed problems of the process. We emphasize that 4PL is the excellent solution from among many alternatives. It is also worthy of notice that EPCglobal network strengthen the role of 4PL. In conclusion, the 4PL system based on EPCglobal network will result in a good success, so it will raise a prestige of air cargo in Korea to a higher position.

• 대한안전경영과학회지
• /
• 제19권3호
• /
• pp.123-128
• /
• 2017

Logistics companies distinguish between medium-sized business and small business according to the size of enterprises. Of course, conglomerates are called global corporations. In this study, mid-sized companies over a certain size or more and those below are classified and decide the priorities among important factors to secure competitiveness in logistics companies are determined through AHP technique. Mid-sized companies are companies that can provide more than two logistics services. For example, they provide warehousing and transportation services in the same time. small companies are companies that can mostly provide one functional service. Warehousing, transportation, manpower, and information are listed as factors in this study. As a result of the study, medium-sized companies emphasized on the importance of transportation. When it comes to small companies, warehousing was emphasized as an important factor. Due to the simultaneous and contemporary service of warehousing and transportation in small-sized company, the reliable image of the company will be underestimated in case of delays in transportation. Competitiveness will also be weakened. Global corporations or conglomerates will start to consider relocating warehousing areas to others except for the central storage hub. They won't plan to invest directly, either. Therefore, it will be possible to secure competitiveness by providing the function of warehousing and to signed easily partnership.

• 설비공학논문집
• /
• 제29권3호
• /
• pp.127-133
• /
• 2017

Performance analysis has been carried out on a high side scroll compressor that had a fixed scroll equipped with a circular oil groove on its thrust surface. Oil was supplied to the oil groove through an intermittent opening from a high pressure oil reservoir formed inside the orbiting scroll hub. Oil in the groove was then delivered to both suction and back pressure chambers by pressure differentials and viscous pumping action of the orbiting scroll base plate. Mathematical modeling of this oil groove system was incorporated into a main compressor performance simulation program for an optimum oil groove design. The study findings were as follows. Pressure in the oil groove can be controlled by changing its configuration and the oil passage area. With an enlarged oil passage, the pressure in the oil groove heightens due to an increased flow rate, but the pressure elevation in the back pressure chamber is small, resulting in reduced friction loss at the thrust surface between the two scrolls. On the other hand, by increasing the oil passage area, the oil content in the refrigerant flow increases. Considering all these factors, the energy efficiency ratio could be improved by about 3.6% under the ARI condition by an optimal oil groove design.

• 통상정보연구
• /
• 제6권2호
• /
• pp.193-216
• /
• 2004

The management strategies of each company has been changed fundamentally owing to the emergence of digital economics by using internet. Therefore the efficient management of global e-port causes the main issues not only effect the survival and growth of ports but also exert new opportunities and fatal threats on them. Under the circumstances of these change, the Kwangyang port have to introduce e-biz for the purpose of increasing the level of their competition. The focus of this article is to suggest some strategies on the implementation of Kwangyang Global e-port in Korea. To analyse the e-port realities, I first reviewed the trends of e-marketing and e-biz. I chose and analysed website of four ports like Hongkong, Singapore, Antwerp and Hamburg as successful global e-port models. This article is focused to suggest the theoretical background by analysing the strategic points of Kwangyang global e-port which are divided in 6C: Contents, Communities, Connection, Commerce, Communication and Customization. This paper analyses many problems of Gwangyang port and presents various develpment ways to activate Gwangyang port. In order to be a global e-port, first of all Gwangyang port must improve global web-site by 6C. And also Gwangyang port have to constitute logistics hub site, create infrastructure needed to run electronic business more easily over the internet, establish nationwide network of industries, build up marine and port logistics information system.

• 산업공학
• /
• 제19권3호
• /
• pp.236-244
• /
• 2006

Postal code is essential for improving efficiency of mail sorting. The Korean postal code, which is introduced in 1970 and had been reformed two times, has controversial issues because of changed postal environments such as modification of administrative districts and logistical transformation into a hub-and-spokes structure. In this study, we propose several improvement and evaluation methods in order to prepare an alternative plan of postal code system. After performing status analysis, we define the customers of postal code and analyze the requirements of them. The 6 proposed new postal code systems are based on each customer groups’ requirements. To evaluate the new systems, we develop several quantitative and qualitative indexes and make a survey of postal experts. Besides, we evaluate the influence of them to the postal environments including delivery sequence sorting process.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.18-21
• /
• 2004

A GFRP based composite blade was developed for a 750kW wind energy conversion system of type class I. The blade sectional geometry was designed to have a general shell-spar structure. The load cases specified in the IEC61400-1 international specification were considered. For withstanding all relevant extreme loads, the structural analysis for the complete blade was performed using a commercial FEM code. The static load carrying capacity, buckling stability, blade tip deflection and natural frequencies at various rotational speeds were evaluated to satisfy the strength requirements in accordance with the IEC61400-1 and GL Regulations. For designing a lightweight blade, the thickness and the lay-up pattern of the skin-foam sandwich structures were optimized iteratively using the DOT program T-bolts were used for joining the blade root and the hub, which were modeled using a 3D FE volume model. In order to confirm the safety of the root connection, the static stresses of the thick root laminate and the steel. bolts were predicted by taking account of the bolt pretension and the root bending moments. The calculated stresses were compared with the material strengths.

• Structural Engineering and Mechanics
• /
• 제54권5호
• /
• pp.909-922
• /
• 2015

The dynamic response and the mooring line tension of a 1/75 scale model of spar-type platform for 2.5 MW floating offshore wind turbine subject to one-dimensional regular harmonic wave are investigated numerically and verified by experiment. The upper part of wind turbine which is composed of three rotor blades, hub and nacelle is modeled as a lumped mass the scale model and three mooring lines are pre-tensioned by means of linear springs. The coupled fluid-rigid body interaction is numerically simulated by a coupled FEM-cable dynamics code, while the experiment is performed in a wave tank with the specially-designed vision and data acquisition system. The time responses of surge, heave and pitch motions of the scale platform and the mooring line tensions are obtained numerically and the frequency domain-converted RAOs are compared with the experiment.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.376-379
• /
• 2004

The purpose of this work is to develop an effective active control system for combustion instabilities of premixed combustors. For the first step, the natural modes of combustion oscillation were investigated for a methane-air premixed combustor and the controls by secondary fuel injection were examined. The main premixed flame is stabilized by a swirler with orifices for secondary injection installed on the central hub. For sensing purposes, a pressure transducer and a chemiluminescence sensor were placed on the appropriate positions. The acoustic characteristics and the source of the oscillation were analyzed by those signals. To test the controllability, two methods of actuations by secondary fuel injection were examined. One is the open loop control and the other is the closed loop control. The comparison of the reduction levels of p $_{rms}$ shows that the closed loop control with a phase-shift injection performs best in this condition.ition.n.