• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.169-174
• /
• 2007

분산 데이터를 상호 운용하기 위해서는 공유되는 정보가 효율적으로 처리 및 관리되어야 한다. 특히 레거시 시스템과 같이 이질성을 내포하고 있는 환경에서 협업을 위한 상호 운용성의 확보가 효율적인 관건이다. 따라서 본 논문에서는 레거시 시스템간의 데이터 공유 및 교환에서 발생하는 의미적 상호 운용성의 문제점을 극복하는 XMDR 메시지 기반의 하이브리드 에이전트를 이용한 데이터 허브 시스템을 제안한다. 이 시스템은 데이터 협업 시 실시간으로 변화는 데이터론 일관성 있게 유지하기 위해서 질의 변환 방법인 메시지 사상 기법을 제시하여 이용한다. 이는 레거시 시스템들 간의 협업에 필요한 데이터를 공유 및 교환하는데 실시간으로 변화하는 데이터를 일관성 있게 유지한다. 그리고 통합 검색시 단일 인터페이스를 제공하여 각 시스템의 독립성을 유지하면서 데이터의 투명성과 가용성을 향상 시킬 수 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.387-391
• /
• 2009

The experimental study on the ducted fan for the propulsion system of a small UAV has been performed. In this paper, to investigate the three-dimensional unsteady flow field characteristics of the ducted fan, it was measured by using a $45^{\circ}$ inclined hot-wire from hub to tip at inlet, behind the rotor and outlet of the ducted fan. The hot-wire signal data was acquired at fixed yaw angle. The data was averaged by using the PLEAT (Phase Locked Ensemble Averaging Technique), and then three of non-linear equations were solved simultaneously by using the Newton-Rhapson numerical method. Flow characteristics such as tip vortex, secondary flow and tip leakage flow were confirmed through axial, radial and tangential contour plot.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.395-398
• /
• 2009

Currently, a new generation of ducted fan UAVs (Unmanned Aerial Vehicles) is under development for a wide range of inspection, investigation and combat missions as well as for a variety of civil roles like traffic monitoring, meteorological studies, hazard mitigation etc. The current study presents extensive results obtained experimentally in order to investigate the tip clearance effects on performance characteristics of a ducted fan for small UAV systems. Three ducted fans having different tip clearance gap and with same rotor size were examined under three different yawed conditions of calibrated slanted hot-wire probe. Three dimensional velocity flow fields were measured from hub to tip at outlet of the ducted fan. The analysis of data were done by PLEAT (Phase locked Ensemble Averaging Technique) and three non-linear differential equations were solved simultaneously by using Newton -Rhapson numerical method. Flow field characteristics such as tip vortex and secondary flow were confirmed through axial, radial and tangential velocity contour plots. At the same time, the effects of tip clearance on axial thrust and input power were also investigated by using wind tunnel measurement system. For enhancing the performance of ducted fan, tip clearance level should be as small as possible.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.3 s.42
• /
• pp.17-24
• /
• 2007

This paper presents the design procedure of a vertical wind turbine named jet-wheel-turbo turbine and the numerical and experimental verifications. The design parameters such as the rotor inlet angle, the diameter-to-hub ratio, the inlet guide outlet angle and the solidity were optimized to maximize the energy transfer, and to further increase the turbine efficiency by applying the side guide vane and the side opening to the rotor. The maximum power coefficient of 0.59, which is much higher than the ever-designed three-bladed horizontal turbines, was experimentally obtained when the optimal inlet- and side-guide vanes were installed and both sides of the rotor were 80% opened. The maximum power coefficients occur at the tip speed ratio ranging between 0.6 and 0.7. This vertical-axis turbine model can be applied to the large-scale power generation system with the speed and torque control algorithm for the specified wind characteristics.

• Journal of Arbitration Studies
• /
• v.30 no.1
• /
• pp.3-37
• /
• 2020

The Korean Arbitration Act (KAA) enacted in 1966 was entirely revised in 1999, adopting the 1985 UNCITRAL Model Law on International Commercial Arbitration. Korea is trying to be an international arbitration hub in the region, taking advantage of its geographical location in Asia and its highly open economy. KAA was revised in 2016 again in order to reflect the criticisms against the previous KAA, changes in the arbitration environment, and the 2006 amendment to the UNCITRAL Model Law. The basic direction of the revision was to maintain the UNCITRAL Model Law system and to deal with the national arbitration and international arbitration in the same framework. The scope of revision covers all fields of arbitration, including arbitration agreements, arbitrators, arbitral proceedings, interim measures of the arbitral tribunals, recognition/enforcement of arbitral awards, and their annulment. This paper aims to introduce the important issues of the 2016 revision of KAA, to offer important information discussed in the process of revision, and thus to help those concerned in the interpretation and implementation of KAA. The 2016 revision of KAA is expected to help greatly in promoting not only the national arbitration, but also the international arbitration in Korea.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.60-70
• /
• 2011

Vehicle location detection and wireless communication method have be designed along the same lines as GPS, CDMA and WLAN, which is based upon the selecting factors such as state-of-art technology trend, accuracy, stability, and economic feasibility, in order to select the optimum method of information communication networks for integrated "Transportation-Power-Facilities" on the electric bus. In addition, the key features of each alternative for an efficient linkage have been review and the integration methodology for linking among Transportation Charging Center, Transportation(ITS, BIS) Center and smart Grid Center has been drawn up based on a technical level of difficulty of each alternative, political and administrative difficulties, and expense justification.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.5
• /
• pp.646-652
• /
• 1999

Detailed characteristics of the mean flow field inside the rotor of a multiblade fan with scroll are presented in this paper by measurements and visualizations. The measurements were taken with a five-hole probe and conformed by smoke test. How field is distinguished clearly in 3 regions with respect to the flow directions. The first region is near the exit of scroll where the fluid flows the opposite direction to the rotation of rotor. The second is opposite side of the scroll exit where the fluid flows the same direction to the rotation of rotor. The third is the region where the fluid flows toward the blades directly with the largest values comparatively. The strongest recirculation is happened in the second region, and the weakest one is in the third region. This complex configuration makes the flow field highly non-uniform and may cause to generate a noise and ineffective flow efficiency.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.216-217
• /
• 2019

As the shipping market deteriorates, shipping companies seek to realize economies of scale by promoting the enlargement of container ships. Container terminal operators are increasingly adopting automated equipment and systems in order to quickly provide services and attract traffic. As such, the competition for each terminal to become a hub port is intensifying. Increased automation of advanced container terminals improves productivity and efficiency In the meantime, Korea remains semi-automated. Therefore, the relevant subject survey through SPSS 23.0 program for analysis of recognition difference, We will check the awareness among stakeholders for the smooth introduction.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.5
• /
• pp.1257-1263
• /
• 1998

To realize a highly reliable satellite-base data distribution system efficiently, a hierarchical distributed control network which utilizers a sub control station(SCS) in addition to a hub and a user station(US) is proposed and evaluated. The results show that there exists an optimum number of sub control stations that minimizes the polling processing time as a parameter of the processing time ratio between US-SCS and SCS-CS links. From a viewpoint of the control network cost, it is shown that the cost can be less compared to the conventional one, when the communication cost between the US and SCS is slightly reduced.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.1
• /
• pp.21-26
• /
• 2012

In this investigation, the aerodynamic performance evaluation of a 1MW class blade has been performed with the purpose of the verification of target output and its clear understanding of flow field using CFD commercial code, ANSYS FLUENT. Before making progress of CFD analysis the HERACLES V2.0 software based on blade element momentum theory was applied for confirmation of quick and approximate performance in the preliminary stage. The blade was designed to produce the target output of a 1MW class at a rated wind speed of 12m/s, which consists of five different airfoils such as FFA W-301, DU91-W250, DU93-W-210, NACA 63418 and NACA 63415 from hub to tip. The mechanical power by CFD is approximately 1.195MW, which is converted into the electrical power of 1.075MW if the system loss is considered to be 0.877.