• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.23-32
• /
• 2009

• Journal of Ship and Ocean Technology
• /
• 제11권2호
• /
• pp.1-9
• /
• 2007

This paper describes the design and development of a hovering AUV constructed at Cheju National University and analyses the dynamic performance of the vehicle using simulation programs. The main purpose of this AUV is to carry out fundamental tests in its station keeping, attitude control, and desired position tracking. Its configuration is similar to the general ROV appearance for underwater works and its dimensions are 0.75m*0.5m*0.5m. It has 4 thrusters of 450 watts for longitudinal/lateral/vertical propulsion and is equipped with a pressure sensor for measuring water depth and a magnetic compass for measuring heading angle. The navigation of the vehicle is controlled by an on-board Pentium III-class computer, which runs with the help of the Windows XP operating system. These give us an appropriate environment for developing various algorithms needed for developing and advancing Hovering AUV.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권1호
• /
• pp.40-47
• /
• 2016

This paper describes the design and performance of a hovering AUV constructed at KMOU (Korea Maritime and Ocean University). Before the field test, we analyzed the dynamic performance of the AUV using a simulation program made by Matlab & Simulink. Also, a PID controller was designed to control the thrusters. Using 4 thrusters (2 vertical and 2 horizontal), the AUV could be controlled using dynamic motion with 4-DOF. A simulation and field test were conducted with way-point tracking, maintaining the desired depth. To perform way-point tracking, the AUV can be fine-tuned to the desired heading angle through the LOS (Line Of Sight) method. This paper shows the results of simulation and field tests.

• International Journal of Ocean System Engineering
• /
• 제3권4호
• /
• pp.218-224
• /
• 2013

This paper describes the design and control of a hovering AUV test-bed and analyzes the dynamic performance of the vehicle using simulation programs. The main purpose of this vehicle is to carry out fundamental tests of its station keeping, attitude control, and desired position tracking. Its configuration is similar to the general appearance of an ROV for underwater operations, and its dimensions are $0.75m{\times}0.5m{\times}0.5m$. It has four 450-W thrusters for longitudinal/lateral/vertical propulsion and is equipped with a pressure sensor for measuring the water depth and a magnetic compass for measuring its heading angle. The navigation of the vehicle is controlled by an onboard Pentium III-class computer, which runs with the help of the Windows XP operating system. This provides an appropriate environment for developing the various algorithms needed for developing and advancing a hovering AUV.

• 대한임베디드공학회논문지
• /
• 제9권3호
• /
• pp.165-171
• /
• 2014

In this paper, we propose the hardware and software of a test-bed of a hovering AUV (autonomous underwater vehicle). Test-bed to develop as the underwater robot for the hovering -type is planning to apply for marine resource development and exploration for deep sea. The RTU that controls a azimuth thruster and a vertical thruster of test-bed is a intergrated-type thruster. The main control unit that collects sensor's data and performs high-speed processing and controls a movement of test-bed is a underwater hybrid navigation system. Also it transfers position, posture, state information of test-bed to the host PC of user using a wireless communication. The host PC checks a test-bed in real time by using a realtime monitoring system that is implemented by LabVIEW.

• 제어로봇시스템학회논문지
• /
• 제16권5호
• /
• pp.489-497
• /
• 2010

This paper presents the design of hardware platform, which is a test bed for the navigation system and hovering type AUV (Autonomous Underwater Vehicle) under the OCP (Open Control Platform). The developed AUV test bed consists of two hulls, four thrusters, and the navigation system which uses a SBC2440II with IMU (Inertial Measurement Unit). And the SMC (Sliding Mode Control) is chosen for the diving and steering control of the AUV. This paper uses ACE/TAO RTEC (Real-Time Event Channel) as a middleware platform in order to control and communicate in the developed AUV test bed. In this paper, two computers are used and each of them is dedicated for the specific purpose, the first computer is used as the SMC module and the middleware platform for the ACE/TAO RTEC and the second computer is used for the sensor controller. We analyze the performance of the AUV test bed under the OCP.

• 제어로봇시스템학회논문지
• /
• 제19권9호
• /
• pp.797-804
• /
• 2013

In this paper, a study of a new hovering six dof underwater robot with redundant horizontal thrusters, titled HAUV (hovering AUV), is presented. The results of study on the structure design, deployment of thrusters, and development of the developed control system of the AUV was presented. For the HAUV structure, a structure design and an analysis of the thrusting system was performed. For navigation, a sensor fusion board which can proceed various sensor signals to identify correct positions and speeds was developed and a total control system including EKF (Extended Kalman Filter) was designed. Rolling, pitching and depth control tests of the HAUV have been performed, and relatively small angle error and depth tracking error results were shown.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.414-419
• /
• 2010

본 논문은 호버링 무인잠수정 'NOAH'의 설계과정을 언급하였고 그 성능을 확인하기 위한 수학모델을 정립하고 실험을 실시하였다. 시뮬레이션과 수조실험을 통해 성능을 검증하였으며, 무인잠수정 NOAH의 설계목표인 자세 및 위치제어를 위한 기본실험을 실시하였다. 설계된 무인잠수정은 일반적인 ROV형태의 외형을 갖고 있으며, 이러한 외형은 NOAH의 제작목적에 따라 다양한 장비를 설치하여 실험하기가 용이하며 크기는 $0.75m{\times}0.5m{\times}0.5m$이다. 추진을 위한 450watt의 용량을 갖는 4개의 추진기가 주행방향, 횡방향, 수직방향으로 설치되어져 있고 수심을 측정하기 위한 압력센서와 방향각을 측정하기 위한 자력컴파스가 설치되었다. 잠수정의 주행을 제어하기 위해 펜티엄 III의 소형 온보드 컴퓨터에 운영체제는 윈도우 XP를 탑재하였다. 제작된 호버링 무인잠수정 NOAH는 다양한 환경에서 여러 가지 제어알고리즘을 적용하여 성능을 개선하고 실험을 하기 위한 테스트베드로 운영된다.

• 대한임베디드공학회논문지
• /
• 제10권4호
• /
• pp.257-264
• /
• 2015

For the tracking of the way-points of hovering AUV (HAUV), we suggest a simple PID controller. The way-points are designed to approach to a virtual underwater structure and the heading angles at each way-point are set to look at the structure in the face. The proposed controller consists of a vertical controller to maintain the depth and pitch angle, and a horizontal controller to move to the desired position as well as to adjust the heading angle of the HAUV. In the simulation using Matlab/Simulink, the HAUV with the proposed PID controller is shown to track all the way-points within 1 m range while maintaining proper heading angle at each way-point.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권6호
• /
• pp.516-526
• /
• 2016

본 논문은 연구용으로 개발된 호버링 타입 무인잠수정을 소개하고 기본적인 운동성능에 대한 시뮬레이션 및 실해역 실험결과를 서술하였다. 본 연구에서 개발된 무인잠수정은 수평 및 수직 추진기를 이용하여 4자유도 운동을 제어 할 수 있으며, 실험이 용이하고 운용하기 쉬운 구조의 테스트 베드용으로 설계하였다. 본 논문에서는 실해역 실험 이전에 무인잠수정의 6자유도 운동방정식을 전개하고 Matlab/Simulink를 이용하여 시뮬레이션 프로그램를 구성하였으며, 이를 통하여 설계된 무인잠수정의 기본적인 운동성능을 확인하였다. 또한 무인잠수정이 주어진 임무를 수행하기 위하여 PID 제어기 및 Fuzzy PID 제어기를 설계하였고 설계된 제어기의 성능을 시뮬레이션을 통하여 확인하였다. 실제 제작된 무인잠수정의 운동성능을 확인하기 위해 실해역에서 실험을 수행하였으며, 설계된 PID 제어기 및 Fuzzy PID 제어기를 이용하여 경유점 제어를 수행하였고 그 결과 조류 외란이 존재하는 실해역 상에서 적절한 제어성능을 확인 할 수 있었다.