• Journal of architectural history
• /
• v.15 no.3
• /
• pp.99-118
• /
• 2006

We have focused on the building appearance according to the change of conservation policy and urban fabric in Bukchon, Seoul. The Urban Hanok, urban traditional housing type, had been evolved in modern contort from 1920's to 1960's, that is to say, many buildings(Urban Hanok) in Bukchon area has built up with a lot and road at the same time. But the change of conservation policy has an effect on the urban fabric and building(wooden structure, RC and brick building). Thus many types of building in Bukchon has undergone a various change. The purpose of this paper is to define a change factor of Bukchon buildings. Thus we need to pay attention to policy and urban fabric. We reached the result as follows. First, the change of architecture regulations according to the several policies(an aesthetic area, an altitude area for sky line restriction and so on) brought into building deformation and eventually the historic scenery of Bukchon has been spoiled. Second, the change of policy had an effect on the change of roads and lots. Buildings on a widen road and a united lot was built newly. But new buildings built up with a concrete or brick structure was not in harmony with the historic scenery of Bukchon area. Third, a development method of a large lot with lack prudence(disregarded a scale and size of lot) did damage to Urban hanok and urban fabric. With the understanding on the relationship of buildings, a urban fabric and a policy in Bukchon, we can define the identity and correspond with the urgent request for a the conservation of historic urban scenery In addition we can suggest the policy and the design guidelines for the reservation and rehabilitation for Bukchon, Seoul.

• Korean Institute of Interior Design Journal
• /
• v.27 no.2
• /
• pp.55-67
• /
• 2018

There is a growing interest on and expansion of rights of people with disabilities. Among them, people with visual impairment show high adaptation to environments in comparison to people with other types of disabilities, thus a large percentage of them live in their own houses rather than residing in a care facility. According to the housing status of people with visual impairment, the ratio of their residence in rural areas is high. In rural areas people who have disabilities often live in poor residential environments, requiring much improvement. However, such improvement is too costly for them to pay, and home modification that does not fully consider the user, may cause less efficiency and another dangerous situation to people with disabilities. The purpose of this study is to delineate empirical lessons for direction of customized home modification for people with disabilities through analysis of process of home modification including the execution as a intervention. This study used qualitative method to examine and analyzed the entire customized home modification process. The conclusion of this study is as follows. First, home modification measures should be derived considering the suitability of the target building for the specific condition of residents. Second, discussions with various stakeholders from the early stage during which proper home modification measure is searched are essential for realizing appropriate customized home modification. This study has significance in that it provides the direction for customized home modification for people with disabilities as well as empirical data that could reduce trials and errors in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.1
• /
• pp.68-76
• /
• 1999

A formal survey was carried out in Nharira-Lancashire areas located in Chivhu to assess the calf rearing systems practiced in smallholder dairy farming areas of Zimbabwe. A total of 47 farmers, collectively owning 305 cows and 194 calves of various breeds, participated in the survey. All the farmers allowed their calves to suckle their dams all day to obtain colostrum. The colostrums intake period was significantly (p < 0.05) shorter (5.2 vs 4.1 days) in the small scale commercial area (SSCA) compared to communal area (CA). Milk was first sold to the Nharira-Lancashire Milk Centre a day after the colostrum intake period ended. Most of the CA (91.3%) and SSCA (77.8%) farmers penned their cows and calves together at night during the colostrum intake period. Thereafter the calves were penned separate from their dams. After colostrum intake, two types of calf suckling systems were practised; twice a day suckling and twice a day then changed to once a day suckling. In both systems, suckling was allowed for 30 minutes after the cows had been hand milked. There was no significant (p < 0.05) difference in the mean weaning age of calves between the CA and SSCA (5.8 vs 5.4 months). The most common weaning method was through separation of the calves from the dams. The limitaitions to calf production in Chivhu were the prohibitively high costs of calf meals, poor feed resources during the dry season, a general lack of knowledge on calf rearing diseases and inappropriate calf housing.

• KIEAE Journal
• /
• v.11 no.4
• /
• pp.29-36
• /
• 2011

The aim of this study was to study the functions and roles of Green Community Rediscovery Center (GCRC) in terms of community integration, to design GCRC with various types of green roofs, and to investigate the possibility of applying a renewable energy system (e.g., PV) to the building greenery systems. The four major functional modules for GCRC were suggested: implementation of ecopark and community gardens with environmental education programs, implementation of green housing model with education programs, Discover Science Center, and implementation of green business model with education programs. Three major functions of the center are also presented in terms of design: 1) functions of community gardens; 2) establishment of a green business model, community composting system and an urban farming system; and 3) roles of community gardens in social interactions within GCRC. GCRC provides residents with the opportunities of community gardens, urban farming based on a successful recycling system, as well as a green business model and environmental education programs near their homes. The air temperature of the green roof (utilizing Sedum sarmentosum as a cover plant) was approximately $3^{\circ}C$ lower than that of the non-green roof, indicating a potential efficiency increase in PV systems for GCRC. It was concluded that the GCRC suggested would enhance the neighborhood satisfaction, improve the quality of life and contribute to social integration and community regeneration.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.33-38
• /
• 1998

The intracardiac axial flow pump has been developed This device has several advantages: it fits well anatomically, its blood-contacting surface is small, and it is implanted as easily as an artificial heart valve replacement. The axial flow pump consists of an impeller and a motor, both of which are encased in a housing. Two types of impeller with 4 vanes and 6 vanes are used. Sealing of the motor shaft is achieved by means of a ferrofluidic seal. A flow of 5$\ell$/min was obtained at a differential pressure of 100mmHg with a motor speed of 7091rpm with the 4-vane impeller and 6402rpm with the 6-vane impeller. Sealing was kept against a pressure of 150mmHg at 7000rpm with the 4-vane impeller and 6402rpm with the 6-vane impeller. Sealing was kept against a pressure of 150mmHg at 7000rpm over 24 hours. The index of hemolysis was 0.056 with the 4-vane impeller and 0.214 with the 6-vane impeller. The intracardiac axial flow pump is a very promising circulatory support.

• Journal of the Korea Furniture Society
• /
• v.21 no.1
• /
• pp.26-39
• /
• 2010

This is a leading study to replace the structural analysis methodology on the specific traditional joint by a numerical analysis. Tests were carried out to test the compressive methodologies with the numerical results. The Japanese larch was used as a sample. The Orthotropic property of wood was specifically considered for the finite element numerical analysis. Linear numerical analysis and non-linear numerical analysis for the BEAM element and the two SOLID elements of ANSYS were used to analyze the compressive performance. In addition, more finely divided elements were used to raise the accuracy of the numerical result. Finally, the statistically significant differences were tested between that of the analytical and numerical results. It could be concluded that the SOLID 64 element shows the most optimum result when the non-linear analysis with the more finely divided element was used. However, finely dividing of the element is a considerable time consuming process, and it is quite difficult to raise the accuracy of the non-linear numerical analysis. Therefore, if considering the vertical displacement to be of the only interest, the BEAM element is more efficient than the SOLID element because the BEAM element is reflected as a simple line, which is less time consuming and difficult in dividing the elements. But, the BEAM element cannot accurately model the knot as a strength defect factor which is an important property in the orthotropic property of wood. Therefore, the SOLID element should be used to model the strength defect factor, knot, as it can be efficiently applied on the structural size flexure member which could be more strongly effected by the knot. In addition, it is useful at times when the failure types of members are to be more closely investigated, as the SOLID element is able to examine the local stress distribution of the member. The conclusion drawn by this study is of the good concordance between analytical results and numerical results of compressive wood members, but how orthotropic properties should only be considered. The numerical analysis on the specific Korean traditional joints will be based on the current study results.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.1
• /
• pp.35-42
• /
• 2011

The current study analyzed appropriateness of abandoned rice paddy wetlands as habitats for the Amphibia by assessing functions and value of abandoned rice paddy wetlands within land development districts as a habitat for living creatures and researching into the Amphibia living in the subject districts. For this purpose, the study designated abandoned rice paddy wetlands within Hwaseong A District and Pangyo B District under land development as subject lands. Those wetlands went through succession after abandonment of farming. Detailed study results are as follows. From classification of wetland types and an analysis of their characteristics, it was found that herbaceous plants such as smartweed communities, horsetail communities and reed communities, and woody plants such as pussy willow communities appeared in both districts. These abandoned rice paddy wetlands shows typical characteristics of palustrine wetlands. As a result of a vegetation structure research, it was observed that succession has been progressed for at least over 2~3 years. In assessment of wetland functions by item, it was found that they are developing into fine wetlands in terms of functions because they are ranked over Moderate Class except separate distance from streams. Also from a research into animals living in the abandoned rice paddy wetlands, it was found that main inhabitants are Rana nigromaculata,Rana dybowskii, Hyla japonica, Bufo bufo gargarizans, etc. It can be confirmed that the abandoned rice paddy wetlands are providing appropriate conditions as habitats to the Amphibia in a view that those species have life cycles of inhabitation (shores and wetlands) - egg-laying (rice paddy, puddles and swampy places) - hibernation (rice field banks and swampy places). From this point of view, it was found that abandoned rice paddy wetlands that developed because of abandonment of farming can be used as means to improve structure and functions of habitats.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.438-449
• /
• 2014

This paper is aimed to study on residential choice after retirement. For this reason, this study is analyzed in three aspects ; the factors of residential choice, preferred house types and scales, the characterization of residential mobility. This study reached several conclusions. Firstly, Korea baby boomers are likely to select their residence with different factors after retirement, and they are likely to choose their residence in the view of comfort and convenience. Secondly, apartment resident ratio is shown to be reduced after retirement, and the preference for the country houses and town houses is shown to be increased. Thirdly, the baby boomers don't reduce their residential scale in batches, while they are to show a different appearance depending on the retention scale of housing. Fourthly, The 62.4% of Korean baby boomers is to plan move their residences after retirement, 52.3% of movers, more than half of them, is to go to the different residential area. Fifth, it is analyzed that different variables are to influence on the local and regional of residential mobility of the baby boomers in Korea.

• Analytical Science and Technology
• /
• v.33 no.1
• /
• pp.49-57
• /
• 2020

Controlling the quality of indoor air is important in order to maintain a healthy life. In this study, we investigated the correlation between the hazardous substance concentration of indoor air and circulation based on different ventilation methods in the apartment, which is one of the representative housing types in Korea. As target substances, we considered the hazardous substances which are generated during the cooking process and radon gas which is originated from building materials. We measured the concentrations of carbon dioxide and fine particles in relation to type of food and ventilation methods in order to determine the change in the concentration levels of hazardous substances which are generated during the cooking process. On the other hand, we measured the concentration of radon gas before and after letting fresh air into a room through windows in order to determine the change in the concentration level of radon gas which is originated from building materials. The results show that turning on the ventilation fan plays a major role in reducing the concentration levels of hazardous substances in the kitchen, and that it is more effective to turn on the ventilation fan during cooking than after cooking to prevent the diffusion of hazardous materials produced by cooking through the indoor air. Also, the results indicate that letting fresh air into a room through windows more than one time a day is necessary to reduce the concentration level of radon gas in the room to safe concentration range.

• Environmental Analysis Health and Toxicology
• /
• v.30
• /
• pp.10.1-10.14
• /
• 2015

Recent cohort studies have relied on exposure prediction models to estimate individual-level air pollution concentrations because individual air pollution measurements are not available for cohort locations. For such prediction models, geographic variables related to pollution sources are important inputs. We demonstrated the computation process of geographic variables mostly recorded in 2010 at regulatory air pollution monitoring sites in South Korea. On the basis of previous studies, we finalized a list of 313 geographic variables related to air pollution sources in eight categories including traffic, demographic characteristics, land use, transportation facilities, physical geography, emissions, vegetation, and altitude. We then obtained data from different sources such as the Statistics Geographic Information Service and Korean Transport Database. After integrating all available data to a single database by matching coordinate systems and converting non-spatial data to spatial data, we computed geographic variables at 294 regulatory monitoring sites in South Korea. The data integration and variable computation were performed by using ArcGIS version 10.2 (ESRI Inc., Redlands, CA, USA). For traffic, we computed the distances to the nearest roads and the sums of road lengths within different sizes of circular buffers. In addition, we calculated the numbers of residents, households, housing buildings, companies, and employees within the buffers. The percentages of areas for different types of land use compared to total areas were calculated within the buffers. For transportation facilities and physical geography, we computed the distances to the closest public transportation depots and the boundary lines. The vegetation index and altitude were estimated at a given location by using satellite data. The summary statistics of geographic variables in Seoul across monitoring sites showed different patterns between urban background and urban roadside sites. This study provided practical knowledge on the computation process of geographic variables in South Korea, which will improve air pollution prediction models and contribute to subsequent health analyses.