• Journal of Ocean Engineering and Technology
• /
• v.29 no.1
• /
• pp.45-55
• /
• 2015

Because of the high stress concentration near the toe of a welded joint, the calculation of local stress using the finite element method which is relevant to the fatigue strength of the weld toe crack, is a challenging task. This is mainly caused by the sensitivity of finite element analysis, which usually occurs near the area of a dramatically changing stress field. This paper presents a novel numerical method through which a less mesh-sensitive local stress calculation can be achieved based on the 3D solid finite element, strictly sticking to the original definition of hot spot stress. In order to achieve the goal, a traction stress, defined at 0.5t and 1.5t away from the weld toe, was calculated using either a force-equivalent or work-equivalent approach, both of which are based on the internal nodal forces on the imaginary cut planes. In the force-equivalent approach, the traction stress on the imaginary cut plane was calculated using the simple force and moment equilibrium, whereas the equivalence of the work done by both the nodal forces and linearized traction stress was employed in the work-equivalent approach. In order to confirm the validity of the proposed method, five typical welded joints widely used in ships and offshore structures were analyzed using five different solid element types and four different mesh sizes. Finally, the performance of the proposed method was compared with that of the traditionally used surface stress extrapolation method. It turned out that the sensitivity of the hot spot stress for the analyzed typical welded joints obtained from the proposed method outperformed the traditional extrapolation method by far.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.665-680
• /
• 1997

The specific absorption rate (SAR) distributions in various models of the human head have been analyzed when the models are exposed to 350 MHz and 900 MHz plane waves. The numerical analysis is performed with the finite-difference time-domain (FDTD) method. A homogeneous sphere including a cylinderical neck, a homogeneous head shaped model, and a heterogeneous realistic model are used as models of human head. The incident plane wave used for these calculations is propagating from the front to the back or from the back to the front of the head model, with its E-field vector orientation being parallel to the major length of the body. The specific findings are: 1) the average SARs of the three models are similar mutually but the local SARs of them differ greatly mutually; 2) the power is deposed more deeply in the head at 350 MHz, which is roughly the resonant frequency of a human head, than at 900 MHz; 3) for a plane wave propagating from the back, "hot spot" is found in the neck region, not in the head; 4) for a plane wave propagating from the front, "hot spot" is found in the nose at 900 MHz, and in the upper part of the lip and the jaw region at 350 MHz.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.6
• /
• pp.21-31
• /
• 2020

This study analyzed the spatio-temporal change pattern of greenhouse areas for Sangnam-myeon and Samrangjin-eup of Miryang-si in Gyeongnam, which is one of major greenhouse area. First, in order to overcome the lack of statistical data of the distribution of greenhouses, aerial and satellite images were interpreted from 1987 to 2018, and the spatial distribution of the greenhouse parcels which has continuously increased was mapped based on the digital cadastral map. Next, through the emerging hot spot tool in ArcGIS Desktop, the spatio-temporal change in transition from open-field to greenhouse cultivation was classified into 9 clusters. About 67.7% of the target area was categorized as a hot spot, and the pattern of New hot spot, which were recently converted to greenhouse parcels, covered about 34.1%. While, about 11.3% of parcels were expected to keep the existing open-field cultivation practice for a while. Overall, the greenhouse parcels have been densely developed along a river and were lately expanding even to the far neighbor. It implied that, in the future, the competition of water intake among farms would be more serious and the environmental responsibility in consideration of water quality as well as quantity would be getting strengthened due to increasing pollution loads and river intake.

• Korean Journal of Environment and Ecology
• /
• v.35 no.6
• /
• pp.659-668
• /
• 2021

The purpose of this study is to propose a ventilation corridor management plan to improve the thermal environment for Busan Metropolitan City. To this end, the characteristics of hot and cool spots in Busan were identified by conducting spatial statistical analysis, and thermal image data from Landsat-7 satellites and major ventilation corridors were analyzed through WRF meteorological simulation. The results showed the areas requiring thermal environment improvement among hot spot areas were Busanjin-gu, Dongnae-gu, industrial areas in Yeonje-gu and Sasang-gu, and Busan Port piers in large-scale facilities. The main ventilation corridor was identified as Geumjeongsan Mountain-Baekyangsan Mountain-Gudeoksan Mountain Valley. Based on the results, the ventilation corridor management strategy is suggested as follows. Industrial facilities and the Busan Port area are factors that increase the air temperature and worsen the thermal environment of the surrounding area. Therefore, urban and architectural plans are required to reduce the facility's temperature and consider the ventilation corridor. Areas requiring ventilation corridor management were Mandeok-dong and Sajik-dong, and they should be managed to prevent further damage to the forests. Since large-scale, high-rise apartment complexes in areas adjacent to forests interfere with the flow of cold and fresh air generated by forests, the construction of high-rise apartment complexes near Geumjeongsan Mountain with the new redevelopment of Type 3 general residential area should be avoided. It is expected that the results of this study can be used as basic data for urban planning and environmental planning in response to climate change in Busan Metropolitan City.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.1
• /
• pp.6-11
• /
• 2013

In this paper, the temperature characteristics of mold transformer for the distribution power system have been analyzed by using computational fluid dynamics(CFD). The model has been modeled by coil, cores, insulating materials and frames about 3MVA grade mold transformer and analyzed the temperature distribution of the structure with a heat fluid. The fluid, which is incompressible ideal gas, is analyzed as a turbulent flow phenomenon on the assumption that it is natural cooling of transformer cooling system. Through this study, by examining the temperature distribution and hot-spot of the structure field of the mold transformer, cooling design and temperature distribution information, which are demanded for designing are estimated.

• Journal of Korea Foundry Society
• /
• v.5 no.2
• /
• pp.109-117
• /
• 1985

A two dimensional analysis of the solidification phenomena has been simulated by IAD (Implicit Alternating Direction)method for L-shaped castings with external chills. The effect of chills has been studied with the variation of chill size, shape, and their materials, and also with the variation of the pouring temperature. Three kinds of cross-sectional shapes of chills such as triangle, square, and L-shape were chosen, and graphite, cast iron, and copper for their materials. It has been shown by the computation that the hot spot at the junction of L-shaped castings can not be removed by external chills, and that the distance between the inner corner and the hot spot on the line of symmetry, as well as the solidification time of castings depend only on VHC (Volumetric Heat Capacity).

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.327-332
• /
• 2014

In this paper, the temperature distribution according to the property change of the insulating oil of the power transformer and max temperature were predicted through the ductility interpretation which heat-flow is coupled. By using CFD (Computation Fluid Dynamics) for the interpretation, the temperature distribution of 154kV the class single phase power transformer was predicted. The power loss causing the temperature rise of the transformer was changed to the heat source and we used as the input value for the heat-flow analysis. The temperature distribution was predicted according to the change of the density, specific heat, thermal conductivity and viscosity, that is the ingredient having an effect on the temperature rise of the transformer oil. The mineral oil of 4 kinds used in domestic and international based on the interpreted result was selected and the temperature distribution according to each load and Hot Spot temperature was predicted.

• Health Policy and Management
• /
• v.25 no.4
• /
• pp.285-294
• /
• 2015

Background: Suicide is one of important health problems in Korea. Previous studies showed factors associated with suicide in individual levels. However, suicide was influenced by society that individuals belong to, so it was required to analyze suicide in local levels. The purpose of this study was to analyze the regional disparities of suicide mortality by gender and the association between local characteristics and suicide mortality. Methods: This study included 229 city county district administrative districts in Korea. Age- and sex-standardized suicide mortality and age-standardized suicide mortality (male/female) were used as dependent variables. City county district types, socio-demographics (number of divorces per 1,000 population, number of marriages per 1,000 population, and single households), financial variable (financial independence), welfare variable (welfare budget), and health behavior/status (perceived health status scores and EuroQol-5 dimension [EQ-5D]) were used to represent the local characteristics. We used hot-spot analysis to identify the spatial patterns of suicide mortality and negative binomial regression analysis to examine factors affecting suicide mortality. Results: There were differences in distribution of suicide mortality and hot-spot regions of suicide mortality by gender. Negative binomial regression analysis provided that city county district types (city), number of divorces per 1,000 population, financial independence, and EQ-5D had significant influences on the age- and sex-standardized suicide mortality per 100,000. Factor influencing suicide mortality was the number of divorces per 1,000 population in both male and female. Conclusion: Study results provided evidences that suicide mortality among regions was differed by gender. Health policy makers will need to consider gender and local characteristics when making policies for suicides.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.93-106
• /
• 2001

T-joint and hopper knuckle joint models are typical welded joints in ship structure, which are very susceptible to fatigue damage under service condition. Fatigue test and fracture mechanical analysis were performed on these joints to find out characteristics of fatigue behavior. Unified S-N curve was developed from the test results of these two types of joint using hot spot stress concept, and also propagation life was also estimated using Paris' crack propagation law. Residual stress effect on propagation life was considered in calculating propagation life, as was done with thermo-elasto-plastic FE analysis and residual stress intensity factor calculation. Fatigue life of similar kinds of welded joint could be predicted with this unified S-N curve and fracture mechanical analysis technique.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.383-391
• /
• 2011

The hot-stamping technique is used to manufacture high-strength parts by press forming by heating at a temperature above the Austenite transformation temperature and then rapid cooling. Boron steel, which contains a very small amount of boron, is one of the materials used for hot stamping. The purpose of this study is to show the microstructures and to investigate the mechanical properties under different heat-treatment conditions. The heat treatment of water quenching was conducted at the various temperatures and different elapsed times. These can be practical data useful when boron steels are used for hot stamping. Furthermore, the microstructures and mechanical properties of the spot-welded specimen with coatings and counterpart materials (SPRC 340, SPRC 590) is investigated in order to determine the welding characteristics of boron steel at different welding condition.