• 제목/요약/키워드: Hot-Forming

검색결과 445건 처리시간 0.027초

정치적인 배경이 기업 실적에 영향을 주는가? 중국의 상장된 부동산 회사들을 중심으로 (Do Political Connections Affect Corporate Performance? Evidence from Listed Real Estate Companies in China)

  • 정지양;왕어원;왕윤동
    • 한국콘텐츠학회논문지
    • /
    • 제20권11호
    • /
    • pp.131-144
    • /
    • 2020
  • 많은 나라에 정치적 연결이 널리 퍼져 있으며 현재 경제연구에서 화두가 되고 있다. 중국에서는 기업들이 여러 가지 방법으로 정치적 연결을 활발히 형성하고 있다. 본 논문은 연구모델과 이론분석을 바탕으로 2010~2014년 중국 A주 상장부동산의 재무자료와 기업지배구조 자료를 활용해 정치연계 및 기업성과의 연구 모델을 제시하고 구성한다. 논문은 주로 CEO의 정치 연관성을 분석한다. 이 연구는 분석 결과에 대해 일변량 회귀 분석과 다변량 분석을 사용하여 강건성 테스트를 수행한다. 실증적 연구 분석은 세 부분으로 구성되어 있다. 첫째, 중국 상장 부동산 기업의 경우 CEO 정치 연계는 기업 실적과 상당히 부정적인 상관관계를 가지고 있다. 이는 CEO가 정치적 연줄이 있는 부동산 기업이 다른 기업보다 낮은 성과를 얻는다는 것을 의미한다. 둘째, CEO의 개인적 특성에서 연령, 성별, 교육수준은 기업의 성과와 긍정적인 관계를 가지며, 추가적인 이후 상황은 기업의 성과와 부정적으로 관련되어 있다는 것을 의미한다. 마지막으로 기업 특성은 기업의 성과와 부정적인 관계를 가지며, 최고 관리자 수는 기업의 성과와 긍정적으로 관련되어 있다. 이 연구는 중국 부동산 산업의 정치적 연관성에 대한 연구를 수행했으며, 기업의 발전에 유익한 참고 자료를 제공할 수 있다.

액상소결(液狀燒結)한 SiC계(系)의 전도성(電導性) 복합체(複合體)의 미세구조(微細構造)와 특성(特性)에 미치는 Boride의 영향(影響) (Effects of Boride on Microstructure and Properties of the Electroconductive Ceramic Composites of Liquid-Phase-Sintered Silicon Carbide System)

  • 신용덕;주진영;고태헌
    • 전기학회논문지
    • /
    • 제56권9호
    • /
    • pp.1602-1608
    • /
    • 2007
  • The composites were fabricated, respectively, using 61[vol.%] SiC-39[vol.%] $TiB_2$ and using 61[vol.%] SiC-39[vol.%] $ZrB_2$ powders with the liquid forming additives of 12[wt%] $Al_2O_3+Y_2O_3$ by hot pressing annealing at $1650[^{\circ}C]$ for 4 hours. Reactions between SiC and transition metal $TiB_2$, $ZrB_2$ were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H, 3C), $TiB_2$, $ZrB_2$ and $YAG(Al_5Y_3O_{12})$ crystal phase on the Liquid-Phase-Sintered(LPS) $SiC-TiB_2$, and $SiC-ZrB_2$ composite. $\beta\rightarrow\alpha-SiC$ phase transformation was occurred on the $SiC-TiB_2$ and $SiC-ZrB_2$ composite. The relative density, the flexural strength and Young's modulus showed the highest value of 98.57[%], 249.42[MPa] and 91.64[GPa] in $SiC-ZrB_2$ composite at room temperature respectively. The electrical resistivity showed the lowest value of $7.96{\times}10^{-4}[\Omega{\cdot}cm]$ for $SiC-ZrB_2$ composite at $25[^{\circ}C]$. The electrical resistivity of the $SiC-TiB_2$ and $SiC-ZrB_2$ composite was all positive temperature coefficient resistance (PTCR) in the temperature ranges from $25[^{\circ}C]$ to $700[^{\circ}C]$. The resistance temperature coefficient of composite showed the lowest value of $1.319\times10^{-3}/[^{\circ}C]$ for $SiC-ZrB_2$ composite in the temperature ranges from $100[^{\circ}C]$ to $300[^{\circ}C]$ Compositional design and optimization of processing parameters are key factors for controlling and improving the properties of SiC-based electroconductive ceramic composites.

Al-2Zn-1Cu-0.3Mg합금의 Sc첨가에 따른 미세조직, 전기전도도, 열전도도 및 기계적 특성 변화 (Effect of Sc Addition on Microstructure, Electrical Conductivity, Thermal Conductivity and Mechanical Properties of Al-2Zn-1Cu-0.3Mg Based Alloy)

  • 나상수;김용호;손현택;이성희
    • 한국재료학회지
    • /
    • 제30권10호
    • /
    • pp.542-549
    • /
    • 2020
  • Effects of Sc addition on microstructure, electrical conductivity, thermal conductivity and mechanical properties of the as-cast and as-extruded Al-2Zn-1Cu-0.3Mg-xSc (x = 0, 0.25, 0.5 wt%) alloys are investigated. The average grain size of the as-cast Al-2Zn-1Cu-0.3Mg alloy is 2,334 ㎛; however, this value drops to 914 and 529 ㎛ with addition of Sc element at 0.25 wt% and 0.5 wt%, respectively. This grain refinement is due to primary Al3Sc phase forming during solidification. The as-extruded Al-2Zn-1Cu-0.3Mg alloy has a recrystallization structure consisting of almost equiaxed grains. However, the as-extruded Sc-containing alloys consist of grains that are extremely elongated in the extrusion direction. In addition, it is found that the proportion of low-angle grain boundaries below 15 degree is dominant. This is because the addition of Sc results in the formation of coherent and nano-scale Al3Sc phases during hot extrusion, inhibiting the process of recrystallization and improving the strength by pinning of dislocations and the formation of subgrain boundaries. The maximum values of the yield and tensile strength are 126 MPa and 215 MPa for the as-extruded Al-2Zn-1Cu-0.3Mg-0.25Sc alloy, respectively. The increase in strength is probably due to the existence of nano-scale Al3Sc precipitates and dense Al2Cu phases. Thermal conductivity of the as-cast Al-2Zn-1Cu-0.3Mg-xSc alloy is reduced to 204, 187 and 183 W/MK by additions of elemental Sc of 0, 0.25 and 0.5 wt%, respectively. On the other hand, the thermal conductivity of the as-extruded Al-2Zn-1Cu-0.3Mg-xSc alloy is about 200 W/Mk regardless of the content of Sc. This is because of the formation of coherent Al3Sc phase, which decreases Sc content and causes extremely high electrical resistivity.

남부지역 시설채소 재배 농가의 농약 사용실태 (The Usage Status of Pesticides for Vegetables under Greenhouse Cultivation in the Southern Area of Korea)

  • 이미경;황재문;이서래
    • 농약과학회지
    • /
    • 제9권4호
    • /
    • pp.391-400
    • /
    • 2005
  • 본 연구는 2003년부터 2004년까지 남부지역에서 시설재배되는 오이, (방울)토마토, 딸기, 가지, 고추, 파프리카, 상추, 들깨(잎), 파 등 9 작물에 대해 관행재배 및 친환경인증재배 농가에서의 농약 사용실태를 조사하였다. 총 조사농가수는 202농가이었으며 이 중 관행재배는 124농가, 친환경인증재배는 78농가 이었다. 조사내용으로는 작물명, 재배면적, 재배방법(관행/친환경인증), 농약의 사용목적 및 종류, 농약사용량, 살포횟수, 농약사용방법 등 이었다. 조사된 작물의 평균 농약사용량은 관행재배 농가에서 3.30 kg ai/ha, 친환경인증재배 농가에서 0.47 kg ai/ha로 나타났다. 농약의 평균 살포횟수는 관행재배 농가가 11회, 친환경인증재배 농가가 2회 이었으며, 농약의 살포방법에서는 경엽살포의 비율이 90% 이상이었다. 관행재배농가에서는 작물별로 평균 34종의 농약성분이 사용되고 있었고, 친환경인증재배 농가에서는 10종이 사용되고 있었다. 농약의 사용목적별 유효성분수의 비율은 두 가지 재배방법에서 모두 살균제가 56%, 살충제가 43%를 차지하였다.

지형분석을 통한 한국의 적색토 분포 예측 및 해석 (A Prediction and Characterization of the Spatial Distribution of Red Soils in Korea Using Terrain Analyses)

  • 박수진
    • 한국지형학회지
    • /
    • 제19권2호
    • /
    • pp.81-98
    • /
    • 2012
  • 이 연구는 한국의 적색토 분포 특성을 살펴보고, 지형분석을 통해 분포 지역을 예측한 뒤, 토양 및 지형발달의 관점에서 그 결과를 해석하는 것이 목적이다. 한국의 적색토는 배수가 양호한 평탄한 지형과 완경사지에 주로 분포하고 있으며, 고온다습한 과거의 기후환경 하에서 형성된 뒤 현재까지 잔류하고 있는 것으로 알려져 있다. 이 연구에서 적색토 분포에 대한 정보는 한국의 개략토양도에서 적황색토로 표기된 대토양군들을 추출하여 사용하였으며, 사면에서 나타나는 물과 물질의 이동특성에 기초한 수치고도모델(DEM) 분석을 통해 적색토 분포를 예측하였다. 적색토는 경사도와 지표곡면률이 낮고, 하천수와 토양수의 출현 가능성이 낮은 평탄지와 구릉지에 주로 분포한다는 가설 하에서 실행된 DEM 분석 결과, 실제 조사된 적색토 출현 지역의 67.4%를 예측할 수 있었다. 조사된 적색토와 예측된 적색토간의 차이를 비교하는 과정에서 한국의 토양 및 지형발달을 이해할 수 있는 몇 가지 중요한 사실들을 발견하였다. 먼저 내륙의 침식평탄지에서는 적색토의 분포가 지형분석에 의해 과대 추정되고 있다. 이 지역은 활발한 침식 및 삭박작용을 받고 있어 유사한 지형 조건을 갖춘 곳에 비해 상대적으로 낮은 적색토 출현 빈도를 보이는 것으로 해석된다. 반면, 석회암 지역의 경우 적색토 출현 빈도가 예측결과보다 과소 추정되고 있어, 적색토 분포에 석회암이 중요한 역할을 하는 것으로 보인다. 뢰스(loess) 퇴적층의 존재가 제기되고 있는 한반도 중앙부의 연천과 철원지역 역시 지형분석 결과보다 적색토의 출현 빈도가 높게 나타나 주목된다. 마지막으로 서산과 포항을 연결하는 선을 경계로 그 북쪽이 남쪽에 비해 예측된 것보다 높은 적색토 빈도를 보인다. 이 결과는 토양발달의 공간적인 차이, 뢰스층 및 기타 지질의 영향, 그리고 한반도가 가지고 있는 지반운동의 특성 등의 관점에서 보다 체계적인 연구의 필요성을 제시하고 있다.

내산화성 Mg 모합금을 이용한 고(高) Mg 함유 ECO-Almag6~9 합금 압출재의 제조 및 특성평가 (Fabrication and Evaluation of High Mg-content ECO-Almag6~9 Extruded Products by using Oxidation-resistant Mg Mother Alloy)

  • 김봉환;윤영옥;김세광
    • 한국주조공학회지
    • /
    • 제41권3호
    • /
    • pp.252-259
    • /
    • 2021
  • 산업용으로 활용되는 많은 알루미늄 합금에 마그네슘 성분이 포함되어 있다. 이들 알루미늄 합금에 첨가된 마그네슘 원소는 알루미늄의 강도를 향상시키는 역할을 하지만, 제조 과정 중 산화 경향이 크기 때문에 제품의 품질과 특성을 저해하는 원인이 된다. 마그네슘이 주요 합금원소인 5천계 알루미늄 전신재 합금의 경우, 높은 산화성으로 인하여 마그네슘 함량은 약 5wt% 이내에서만 활용된다. 본 연구에서는 산화 경향이 억제된 것으로 알려진 ECO-Mg 모합금을 이용하여 5wt% 이상의 높은 마그네슘 함량을 포함하는 새로운 합금, ECO-Amag6~9 (6~9wt%Mg 함유) 합금을 제조하고 그 특성을 평가하였다. ECO-Almag6~9 합금은 높은 Mg 함량에도 깨끗한 용탕 품질이 확보되어 양산용 DC 주조기를 이용한 빌렛 제조 및 압출이 가능하였다. 또한 높은 Mg 함량으로 인해기존 산업용 5xxx계 합금에 비해 높은 강도와 연성을 보여 산업적 활용성이 높을 것으로 기대된다.

페놀수지 및 에틸렌 글리콜을 첨가한 유리질 카본 코팅층의 물성 제어 (Morphology control of glassy carbon coating layer to additive ethylene glycol and phenolic resin)

  • 주상현;주영준;이혁준;심영진;박동진;조광연
    • 한국결정성장학회지
    • /
    • 제32권3호
    • /
    • pp.89-95
    • /
    • 2022
  • 본 연구에서는 페놀수지를 사용하여 흑연표면에 유리질 카본 코팅을 진행하였다. 코팅액은 균일한 표면을 가지는 유리질 카본 코팅층 형성을 위해 페놀수지와 경화제, 희석제, 첨가제 등을 혼합하였다. 코팅된 페놀수지는 25~60℃에서 건조 100~200℃에서 경화 500~1,500℃에서 열처리하여 유리질 카본으로 전환하였다. 유리질 카본의 특성 분석을 위해 FTIR, XRD, SEM 분석, 밀도/기공율/접촉각 측정을 진행하였다. 유리질 카본 형성에 있어 최적 온도는 약 1,000℃로 확인되었다. 그리고 첨가제의 함량이 높아질수록 코팅 표면의 결함감소, 기공율 감소, 접촉각 증가, 밀도 증가 등의 효과를 보였다. 첨가제를 통한 유리질 카본 코팅층 형성 방법은 흑연 코팅 및 다른 분야에 적용이 가능할 것으로 기대된다.

Molecular Characterization of an Isolate of Bean Common Mosaic Virus First Identified in Gardenia Using Metatranscriptome and Small RNA Sequencing

  • Zhong-Tian Xu;Hai-Tao Weng;Jian-Ping Chen;Chuan-Xi Zhang;Jun-Min Li;Yi-Yuan Li
    • The Plant Pathology Journal
    • /
    • 제40권1호
    • /
    • pp.73-82
    • /
    • 2024
  • Gardenia (Gardenia jasminoides) is a popular and economically vital plant known for its ornamental and medicinal properties. Despite its widespread cultivation, there has been no documentation of plant viruses on gardenia yet. In the present study, gardenia leaves exhibiting symptoms of plant viral diseases were sampled and sequenced by both metatranscriptome and small RNA sequencing. As a consequence, bean common mosaic virus (BCMV) was identified in gardenia for the first time and named BCMV-gardenia. The full genome sequence of BCMV-gardenia is 10,054 nucleotides (nt) in length (excluding the poly (A) at the 3' termini), encoding a large polyprotein of 3,222 amino acids. Sequence analysis showed that the N-termini of the polyprotein encoded by BCMV-gardenia is less conserved when compared to other BCMV isolates, whereas the C-termini is the most conserved. Maximum likelihood phylogenetic analysis showed that BCMVgardenia was clustered closely with other BCMV isolates identified outside the leguminous plants. Our results indicated that the majority of BCMV-gardenia virus-derived small interfering RNAs (vsiRNAs) were 21 nt and 22 nt, with 21 nt being more abundant. The first nucleotide at the 5' termini of vsiRNAs derived from BCMV-gardenia preferred U and A. The ratio of vsiRNAs derived from sense (51.1%) and antisense (48.9%) strands is approaching, and the distribution of vsiRNAs along the viral genome is generally even, with some hot spots forming in local regions. Our findings could provide new insights into the diversity, evolution, and host expansion of BCMV and contribute to the prevention and treatment of this virus.

티벳의학에 대한 연구 - "사부의전(四部醫典).근본의전(根本醫典)"을 중심으로 (Study on "Four Tantras", the Prime Textbook of Tibetan Medicine)

  • 장은영;윤창열
    • 대한한의학원전학회지
    • /
    • 제11권1호
    • /
    • pp.416-512
    • /
    • 1998
  • The following conclusions are obtained from the studies on the chapters concerning phisiology, pathology, daily conduct, materia medica, pulse, and urinalysis from , of the "Four Tantras". 1. The theoretical basis forming the Tibetan Medicine is the substance of phlegm, bile, and wind each of which is divided into five kinds. These phisiological substances can be transformed into pathological factors when certain environment is formed. 2. In embryology, the semen of the father and menstral blood of mother is considered the most important condition in conception, and the Five factors are regarded as important. There is a detailed explanation of development of the fetus while it stays in the womb of mother during 38weeks, such as the formation of the viscera, channels, sense organs, etc. 3. There is metaphor which compares the human body with the king's palace. With the development of human anatomy, there is the detailed anatomical picture of anterior and posterior aspects of human body. And also there is the measurement of physiological constitution and the three fluids. 4. In division of the channels, they concerned the now of the blood and distribution of the nerve fibers, and each channel is connected with one another. The division of the cannel is namely embryonic channel, channel of existence, channel of connection, and the course of life principle. 5. The seven bodily constituents and three factors of phlegm, bile, and wind are important in sustaining the life of human body as well as growth and maturization, and when their equilibrium is broken, the human body is degnerated, and finally death comes. 6. The signs of death is divided into distant sign, remote sign, certain sign. and uncertain sign, and is used as a clue in diagnosis of the disease. Especially there is a mention about the mechanism of the dreams, and different dreams according to the condition of the patient. 7. In pathology, there is the cause of the disease, the environmental factors which can induce disease, the path by which disease come into the human body, the characteristics of the disease, and the kinds of disease. 8. There is a mention about the conduct, and it is divided into the daily conduct, the mental attitude, and the side-effects which can occur when one puts up with the physiological actions of the body. 9. The daily diet is divided into food and beverage. The food is divided again into grain, meat, fat, boiled food, and spiced food, and the beverage into milk, water, and wine. 10. The pulsation should be taken in lift hand to diagnose heart, small intestine, stomach, spleen, kidney, reproductive organ, and in right hand jungs, large intestine, liver, gall bladder, kidney, and bladder. In the healthy person, the pulse moves 5times in one perspiration, and the type of pulse is constant while the pulse moves 100times. But unhealthy person's pulse is different from this. The urinalysis is the unique part of Tibetan Medicine, and is important in examination of the disease. One should decide which of the three factors are dominant by the obervation of the color, amount of the steam and how long it lasts, odour, foam, and the shape of the swirl in three different states when the urine is hot, warm, and cold. One can determine the life of the patient and which viscera is the cause of the disease by the pulse, and whether the nature of the disease is hot or cold by the urinalysis. 11. The materia medica contains gemstones, minerals, plateau medication, and meat products.

  • PDF

척추 뼈 SPECT/CT검사에서 경피적 척추성형술 시행 환자의 골 시멘트로 인한 인공물과 CT보정방법의 유용성 평가 (Usefulness Evaluation of Artifacts by Bone Cement of Percutaneous Vertebroplasty Performed Patients and CT Correction Method in Spine SPECT/CT Examinations)

  • 김지현;박훈희;이주영;남궁식;손현수;박상륜
    • 핵의학기술
    • /
    • 제18권1호
    • /
    • pp.49-61
    • /
    • 2014
  • 인구의 고령화와 함께 골다공증성 척추압박골절 환자의 발병률은 매년 증가하는 추세이며 경피적 척추성형(percutaneous vertebroplasty, PVP)은 가장 많이 시행되는 표준화된 치료 방법이다. 시술 전 후의 정확한 진단평가에 있어 SPECT/CT 검사의 유용성이 우수하다는 연구 보고가 있으나 시술에 사용되는 골 시멘트(bone cement) 물질은 CT 영상에서 인공물(artifact)을 생성하여 영상품질에 영향을 미친다. 이에 본 연구에서는 골 시멘트가 SPECT/CT 영상에 미치는 영향을 평가하는 데 목적을 두었다. NEMA-1994 팬텀(phantom)에 배후방사능(3.6 kBq/ml), 열소(29.6 kBq/ml), 냉소(물)를 설정한 후 각 원통(cylinder)에 모형 시멘트를 삽입하여 영상 획득하였다. Astonish (Iterative: 4, Subset: 16)으로 재구성하였고, CT 보정 방법은 비감쇠보정(NAC), 감쇠보정(AC+SC-), 감쇠 및 산란보정(AC+SC+) 3가지 방법을 사용하였다. 각각의 보정방법에 따른 평균계수와 시멘트물질의 유 무에 따른 계수 변화율을 비교하고 대조도 회복 계수(contrast recovery coefficient, CRC)를 구했다. 또한, 압박골절 진단을 받은 환자 107명 중 PVP를 시행한 20명을 선별하여 추체를 골절, 정상, 시멘트로 나누고 연조직(척추기립근)을 포함 4곳의 평균 계수를 측정한 후, 뼈/연조직 간 계수 비(bone/soft tissue ratio, B/S ratio)을 구했다. NAC를 기준으로 AC+SC-, AC+SC+의 평균계수는 증가하였고, AC+SC-의 평균계수가 가장 높았으며, AC+SC+는 AC+SC-에 비해 상대적으로 낮았다. 시멘트 물질의 유 무에 따른 평균계수는 시멘트가 존재할 때 NAC, AC+SC-, AC+SC+에 따라 팬텀의 열소에서 12.4%, 6.5%, 1.5%, 냉소 75.2%, 85.4%, 102.9%, 배후방사능 13.6%, 18.2%, 9.1%, 임상영상의 골절부에서 33.1%, 41.4%, 63.5%, 정상부 53.1%, 61.6%, 67.7%, 연조직 10.0%, 4.7%, 3.6%의 증가율을 보였다. 반면 원통 내부의 시멘트 인접부에서 상대적 계수감소를 확인할 수 있었고, 병소에 대한 팬텀영상과 임상영상간의 계수 증가율은 상반된 양상을 보였다. 대조도 비를 나타내는 CRC와 B/S ratio는 NAC, AC+SC-, AC+SC+순으로 향상되었고, 팬텀의 냉소에서는 큰 변화 없이 일정하였다. 정량적 계수는 AC+SC-가, 대조도 비는 AC+SC+가 가장 높게 분석되었다. PVP 시행 환자의 척추 뼈 SPECT/CT 검사에서 AC+SC- 의 사용은 영상계수를 대폭 향상시켜 특히 병소의 농도가 높은 영상을 얻는 반면에 골 시멘트의 영향과 함께, 연부조직 및 산란영역의 영상잡음 계수까지 증가시키므로 대조도비를 향상시키는 AC+SC+의 적용을 병행한다면 임상진단에 유용할 것으로 사료된다.

  • PDF