• 소성∙가공
• /
• 제8권1호
• /
• pp.65-77
• /
• 1999

In recent years, the quality requirements from the customers of hot rolled steel strip have been steadily increasing in diversity and strictness. To meet these quality requirements as well as to improve productivity, steel mills have been doing their efforts for developing high performance Automatic Gauge Control (AGC) system. However, it is very time consuming and also needs a lot of money to develop the new technologies of AGC in actual mill. So, there has been a demand for developing the Dynamic Hot Rolling Simulator since late 80's. It is a kind of software packages and can analyze the dynamic behaviors of hot finishing rolling process without laborious experiments in actual mill. It can also be used as a designing tool of Automatic Gauge Controller. In this work, the Dynamic Hot Rolling Simulator which is applicable to 6 sands hot strip mill rolling was developed. The MATLAB with SIMLINK was used as a software developer for making the main part of simulator because it is very powerful tool for modeling, integrating, controller design, and simulation. In this paper, the structures and the mathematical models of the simulator were briefly described and the results of simulation on the transient phenomena of hot rolling process with actual mill data were also presented.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.281-285
• /
• 2009

This paper is to simulate a solar hot water heating system used in a medium-scale office building using the dynamic simulation. This study is focused chiefly on the annual variation of energy performance, the solar fraction with respect to the difference of hot water load temperature. For this purpose the simple model of a solar hot water heating system has been considered with TRNSYS program and the simulations were performed with the weather data in Seoul, Korea. The share ratio of solar hot water system of the summer season appeared higher than the winter season because that the decrease of the domestic hot water load was far despite the relative decrease of the solar radiation. As the temperature was lower from $60^{\circ}C$ to $50^{\circ}C$, the solar fraction increases 8.1 percent due to 20-percent decrease of annual hot water load.

• 지질공학
• /
• 제30권3호
• /
• pp.379-397
• /
• 2020

본 연구에서는 1922년부터 2019년까지 동래온천수의 장기적인 온천수 수질 변화 특성을 살펴보았다. Mann-Kendall 분석과 Sen의 기울기에 의해서 동래온천수의 장기적인 수질 특성 변화를 분석하면, 온도, Ca, SiO₂, HCO₃는 증가 추세를 보이는 반면에 EC, Na, K, Mg, Cl, SO₄은 감소 추세를 보이거나 또는 거의 추세 변화를 보이지 않는다. 동래온천수의 수질유형은 시간경과에도 변하지 않고 Na-Cl형에 안정적으로 속하고 있다. 2004년, 2009년, 2014년, 2019년의 수질 자료를 이용한 공간 분포도에 의하면, 시기별로 변동을 보이며, 시료 채취 지점에 따라 값의 변화를 보인다. 이는 장기적인 온천수 개발에도 불구하고 동래온천수의 공간적인 수질 특성은 거의 일정하다는 것을 지시한다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제14권2호
• /
• pp.117-129
• /
• 2008

무선 이동통신 단말기와 중앙 서버에 각각 저장되어 있는 자료에 대한 동기화는, 효율적인 이동통신 환경에서는 반드시 필요한 작업이다. 그러나, 이동통신 단말기 제조회사들은 각기 고유의 자료 동기화방식을 사용하고 있기 때문에, 제조회사가 다른 단말기들 간의 자료에 대한 상호 운용을 보장할 수 없다. 본 논문에서는 OMA(Open Mobile Alliance)의 공개 표준안인 SyncML(Synchronization Markup Language) 자료 동기화 방식을 기반으로 하는 통합 자료 동기화 게이트웨이 시스템을 설계하고 구현하였다. 즉, 서로 다른 동기화 방식의 자료를 SyncML 방식의 자료로 변환하는 통합 자료동기화 게이트웨이 시스템을 구현함으로써, 서로 다른 이동통신 단말기들 간의 삼호 운용을 가능하게 하였다. 본 논문에서 구현한 통합 자료 동기화 게이트웨이 시스템을 사용하면, WinCE 기반 ActiveSync 방식의 자료, PalmOS 기반 HotSync 방식의 자료 및 OMA의 SyncML 방식의 자료들 간의 상호 운용이 가능하다.

• 천문학회보
• /
• 제40권1호
• /
• pp.90.1-90.1
• /
• 2015

Almost hot-Super Earths ($R_p$~1 to $4R_{earth}$ orbital period < 100 days) are around Sun-like stars. But our solar system does not have hot-Super Earth. Andre et al. 2015 has explained this phenomenon by that Jupiter blocks migration of super earth. We have found a multi-planetary system KOI-94 with exo-Jupiter and hot-Super Earth from NASA exoplanet archive data (http://exoplanetarchive.ipac.caltech.edu). In this study, within multi-planetary systems including hot-Super Earth, we compared those with and without exo-Jupiter using their host star and exoplanet parameters, such as metallicity [Fe/H], $T_{eff}$ and $R_*/R_p$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.197-201
• /
• 2001

Output and cost efficiency in the production of hot-rolled strip depend to a large content on the uniformity of geometric and mechanical properties over the length and width of the rolled end product. To ensure the homogeneous temperatures required for this during the rolling process a system to measure and evaluate the transverse temperature profile was developed and implemented in production. The systems used consist of temperature scanners and computers for measurement and data evaluation. The systems have been installed in Kwangyang hot strip mills, in the cases at the exit of the finishing train and at the entry of the coiler. They are used in production to determine the effect of the finishing train and the cooling zone on the technological properties of the hot rolled strip.

• 한국분말재료학회지
• /
• 제12권4호
• /
• pp.255-260
• /
• 2005

Direct solid state synthesis by hot pressing has been applied in order to produce high efficiency $Zn_4Sb_3$ bulk specimens. Single phase $Zn_4Sb_3$ with 98.5% of theoretical density was successfully produced by direct hot pressing of elemental powders containing 1.2 at.% excess Zn. Thermoelectric properties as a function of temperature were investigated from room temperature to 600 K and compared with results of other studies. Transport properties at room temperature were also evaluated. Thermoelectric properties of single phase $Zn_4Sb_3$ materials produced by direct synthesis were measured and are comparable to the published data. Direct solid state synthesis by hot pressing provides a promising processing route in this material.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.663-666
• /
• 2002

Hard disk drived (HDD) in computer are used extensively as data storage capacity. The trend in the computer industry to produce smaller disk drives rotating at higher speeds requires an improved understanding of fluid motion in the space between disks. The distribution of pressure disturbance on disks has relation to flow structure. To investigate the flow structure, time-resolved hot-wire measurements of the circumferential velocity component were obtained for the flow between the center pair of four disks of common radius $R_2$ coretating at angular velocity ${\Omega}$ in a fixed cylindrical enclosure. Hot-wire supporter acts as an obstruction in this case. The effects of rotating speed and size of hot-wire supporter diameter between disks on the flow driven by disks were investigated. Velocity spectra at the fixed space were measured to obtain the structure of inner and outer region in flow field.

• 한국공작기계학회논문집
• /
• 제10권2호
• /
• pp.10-17
• /
• 2001

Drilling is one of the most important operations performed in the machining industry. And the material of the workpiece has a profound effect on the tool life, the surface finish produced and the overall economy of the process. Hot-rolled high strength steels have been used for automobile structural material, owing to high hardness and machinability of the material. However, in the drilling of hot-rolled high strength steels, the current knowledge of tool wear and machinability are insuf-ficient. There, it is desirable to monitor drill wear status and hole quality changes during the hole drilling process. Accordingly, this paper deals with the cutting characteristics of the hot-rolled high strength steels using common HSS drill. The performance variables include the drilling thrust, torque and drill wear data obtained from drilling experiments con-ducted on the workpiece. Also drill were is measured by acoustic emission system and computer vision system.

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.510-517
• /
• 2004

A fine hot-wire is used both as a heating element and a temperature sensor in transient hot-wire method. The traditional sensor system is unnecessarily big so that it takes large fluid volume to measure the thermal conductivity. To dramatically reduce this fluid volume, a new sensor fabrication and a data processing method are proposed in this article. Contrast to the conventional and most popular two wire sensor, the new sensor system is made up of divided multiple long and short wires. Through validation experiments, it is found that the measured thermal conductivities of the glycerin are exactly same each other between the conventional and proposed new method. Also some technical considerations in arranging the multiple wires are briefly discussed.