• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.525-531
• /
• 2006

In this study, Sulfonated PONF-g-styrene ion exchange fibers were synthesized by radiation induced graft copolymerization. And also, hybride ion exchange fibers, which was combined sulfonated PONF-g-styrene fibers and cationic ion exchange resin, were fabricated by hot melt adhesion method and then their adsorption properties were investigated. ion exchange capacity and water content of hybrid ion exchange fibers increased as compared with those of bead and ion exchange fiber. Their maximum values were 4.76 meq/g and 23.5%, respectively. Adsorption breakthrough time for mercury of hybrid ion exchange fiber was slower than those of bead resin and fibrous ion exchanger. It's value was 130 minutes. Their breakthrough time become short as increasing of pH, and concentration. The initial breakthrough time was observed before and after 10 minutes as increasing of concentration. The adsorption of hybrid ion exchange fibers for $Hg^{2+}\;Pb^{2+},\;Cd^{2+}$ among heavy metals in the mixed solution was observed before 20 min. And also, The adsorption for $Hg^{2+}$ among the heavy metals by hybride ion exchange fibers was observed.

• Journal of Distribution Science
• /
• v.16 no.8
• /
• pp.63-68
• /
• 2018

Purpose - Lettuce (Lactuca sativ L.) is one of the economically important vegetable crops, which worldwide market value is over 100 billion U.S. dollar. In Korea, about 89.7 kilo ton of lettuce was produced in 3400ha in 2016, recoded as No. 1 vegetable crop in domestic green house production. However, recently, domestic lettuce production and cultivation areas are all getting decreased. Thus, novel approaches are needed to be implemented to revive the production. Research design, data and methodology - In this review paper, we first prioritized the end-user traits which are imperative to positively stimulate the domestic lettuce market and discussed relevant genomics strategies. Especially, we assessed a possibility whether school meal program would be a potential niche market. Results - The genomics technologies, which become widely applied in the crop biotechnology since 2008 when next generation sequencing method was developed, may be a good solution in the crop improvement, efficiently gathering valuable information of agriculturally useful traits. Significantly, in lettuce, the high quality whole genome sequence, based on Lactuca sativa cv. Salinas, is publically available and this genomics platform, thus, would be implemented in lettuce breeding program to innovate relevant end-user traits both for the farmers and customers, including the disease resistance to the Fusarium wilt, productivity under hot weather conditions, various nutritional qualities and so forth. These improvements will boost domestic lettuce industries in the near future. Conclusions - Due to the nutritional distinctions comparing to the western style lettuces, domestic leaf lettuces could be one of the important vegetables in the school meal programs. To make it happen, we would better devise diverse recipes to make a salad with it, instead of only using as a wrap vegetable. Meanwhile, novel lettuce varieties need to be developed, which are favorable to the students and also easy to be handled with while processing. Overall, to achieve international competence in the lettuce industries, we need to create elite lettuce varieties that satisfies domestic farmers as well as customers, suitable to various niche markets, such as school meal program. Thus, efficient breeding programs using genomics approaches should be established in advance and careful monitoring on the preference of the related customers for a niche market be continued persistently.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.654-659
• /
• 2016

This study was designed to compare the quality characteristics of spray-dried (SD) and freeze-dried (FD) Pueraria thunbergiana extracts powder hot water extracts. Quality characteristics of the SD and FD powder including moisture content, color value, water absorption index, water solubility index, dynamic angle and antioxidant activities were evaluated. The moisture content of SD powder (1.50%) was lower than that of FD powder (2.92%). $L^*$ and $b^*$ values of SD powder was lower than of FD powder. The water absorption index was higher in FD powder (1.40) and water solubility index in SD powder (94.10%) was higher than that FD powder (90.69%). Dynamic angle of SD powder ($36.46^{\circ}$) was higher than that of FD powder ($33.30^{\circ}$). The DPPH radical scavenging activities of 5 mg/mL solution of SD powder and FD powder were 85.38 mg/mL, 59.38 mg/mL, respectively. And, the same trend was observed for the ABTS radical scavenging activities of the drying powder as that observed for their DPPH radical scavenging activities. There were relatively higher contents of phenolic compounds in SD powders than in FD powders. In conclusion, spray-dried Pueraria thunbergiana extracts showed the high WSI, polyphenol, DPPH and ABTS radical scavenging activities and low moisture content and dynamic angle than freeze dried powder.

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.3
• /
• pp.16-23
• /
• 1981

This study has been carried out to make a comparative study for the adhesive control methods specifically developed for application to formaldehyde. The method for formaldehyde determination used in this report is the improved chromo tropic acid determination. The results are summarized as follows: 1. The soaking treatment in aqueous solution of urea wok the most scavenging effect on the formaldehyde release from a plywood sample glued with a urea formaldehyde adhesive, and other removal treatment such as resorcinol, albumine-, and hardener-treatment gave significant reduction too. 2. In glue shear strength of dry test, 2% of resorcinol treatment and soaking treatment showed the highest strength and all the other treatment met the standard, but in hot water soaking test, 2% of resorcinol treatment gave the best results, on the other hand, adding the hardener showed the lowest strength and failed in meeting the standard. 3. Air dried moisture content of all treated plywood met the standard which calls for 13% or bellow. 4. In this comparative study, we can make a strong combination each other or go into the details of one treatment for the best result through the more study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.103-108
• /
• 2019

Non-equilibrium molecular dynamics simulation on the thermal boundary resistance(TBR) of an aluminum(Al)/silicon(Si) interface was performed in the present study. The constant heat flux across the Si/Al interface was simulated by adding the kinetic energy in hot Si region and removing the same amount of the energy from the cold Al region. The TBR estimated from the sharp temperature drop at the interface was independent of heat flux and equal to $5.13{\pm}0.17K{\cdot}m^2/GW$ at 300K. The simulation result was experimentally confirmed by the time-domain thermoreflectance technique. A 90nm thick Al film was deposited on a Si(100) wafer using an e-beam evaporator and the TBR on the film/substrate interface was measured using the time-domain thermoreflectance technique based on a femtosecond laser system. A numerical solution of the transient heat conduction equation was obtained using the finite difference method to estimate the TBR value. Experimental results were compared to the prediction and discussions on the nanoscale thermal transport phenomena were made.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.311-321
• /
• 2019

Greenhouse farmers often use thermal screens to reduce greenhouse heating expenses during the winter, and for shade during hot, sunny days in the summer, as it is an inexpensive solution to temperature control relative to other available options. However, accurate measurements of their emitted and absorbed radiations are important for the selection of suitable screens that offer maximum performance. Material's ability to save energy is highly dependent on these properties. Limited studies have investigated the measurement of these properties under natural conditions, but they are only applicable to materials having partial porosities. In this work, we describe a new radiation balance method for determining emissive power and absorptive capacity, as well as reflectivity, transmissivity and emissivity of materials having complete and partial transparency by using pyrgeometer and net radiometer. In this study, four materials with zero porosity, were tested. The emissivity value of PE, LD-13, LD-15 and PH-20 was $0.439{\pm}0.020$, $0.460{\pm}0.010$, $0.454{\pm}0.004$, and $0.499{\pm}0.006$, respectively. All tested samples showed high emitted radiation as compared to absorbed radiation.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.3
• /
• pp.95-104
• /
• 2022

The development of non-flammable all-solid-state batteries (ASSLBs) has become a hot topic due to the known drawbacks of commercial lithium-ion batteries. As the possibility of applying sulfide solid electrolytes (SSEs) for electric vehicle batteries increases, efforts for the low-cost mass-production are actively underway. Until now, most studies have used high-energy mechanical milling, which is easy to control composition and impurities and can reduce the process time. Through this, various SSEs that exceed the Li⁺ conductivity of liquid electrolytes have been reported, and expectations for the realization of ASSLBs are growing. However, the high-energy mechanical milling method has disadvantages in obtaining the same physical properties when mass-produced, and in controlling the particle size or shape, so that physical properties deteriorate during the full process. On the other hand, wet chemical synthesis technology, which has advantages in mass production and low price, is still in the initial exploration stage. In this technology, SSEs are mainly manufactured through producing a particle-type, solution-type, or mixed-type precursor, but a clear understanding of the reaction mechanism hasn't been made yet. In this review, wet chemical synthesis technologies for SSEs are summarized regarding the reaction mechanism between the raw materials in the solvent.

• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.556-566
• /
• 2010

A new kinetic spectrophotometric method is developed for the measurement of Mn(II) in natural water samples. The method is based on the catalytic effect of Mn(II) with the oxidation of Gallocyanin by $KIO_4$ using nitrilotriacetic acid (NTA) as an activation reagent at 620 nm. The optimum conditions obtained are $4.00{\times}1^{-5}\;M$ Gallocyanin, $KIO_4$, $1.00{\times}10^{-4}\;M$ NTA, 0.1 M HAc/NaAc buffer of pH = 3.50, the reaction time of 5 min and the temperature of $30^{\circ}C$. Under the optimum conditions, the proposed method allows the measurement of Mn(II) in a range of $0.1\;-\;4.0\;ng\;mL^{-1}$ and with a detection limit of down to $0.025\;ng\;mL^{-1}$. The recovery efficiency in measuring the standard Mn(II) solution is in a range of 98.5 - 102%, and the RSD is in a range of 0.76 - 1.25%. The newly developed kinetic method has been successfully applied to the measurement of Mn(II) in both some environmental water samples and certified standard reference river water sample, JAC-0031 with satisfying results. Moreover, few cations and anions interfere with the measurement of Mn(II). Compared with the other catalytic-kinetic methods and instrumental methods, the proposed kinetic method shows fairly good selectivity and sensitivity, low cost, cheapness, low detection limit and rapidity. It can easily and successfully be applied to the real water samples with relatively low salt content and complex matrices such as bottled drinking water, cold and hot spring waters, lake water, river water samples.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.335-341
• /
• 2010

The extraction of polyphenol and flavonoid from black rice bran was performed by diverse extraction methods using the sugar solution, ethanol, hot water ($80^{\circ}C$), and by subcritical water extraction (SWE) method. By SWE under operating conditions of $190^{\circ}C$, 1,300 psi, and 10 min, the maximum yields of total polyphenolic compounds (35.06${\pm}$1.28 mg quercetin equivalent (QE)/g dried material and flavonoids (7.08${\pm}$0.31 mg QE/g dried material) could be obtained. These results were over 11.77- and 12.21-fold higher than those of the ethanol extraction, which showed the highest extraction efficiency among tested conventional methods in total polyphenols (2.98${\pm}$0.74 mg QE/g dried material) and flavonoids (0.58${\pm}$0.21 mg QE/g dried material), respectively. Though the highest antioxidant activity (87.14${\pm}$1.14%) was observed at the dried extract obtained from ethanol method, the relative antioxidant activity per 1 g dried black rice bran by SWE ($190^{\circ}C$, 10 min) was over 11.53-fold higher than that by the ethanol extraction.

• Korean Journal of Organic Agriculture
• /
• v.22 no.1
• /
• pp.97-113
• /
• 2014

An actual proof experiment was carried out to establish the production of high quality organic rice at farm household in Gwangjin, Junnam, Korea 2011. Experimental plot was designed with conventional organic cultivation and manual organic cultivation in both Hopeongbyeo and Onnuri varities. Experimental field was consisted with suitable drainage loam soil, anryong series, and normal paddy field. Chemical characteristics of the soil were investigated from initial soil and soil after harvest in experimental sites. Seed disinfection was treated with hot water dipping method at $60^{\circ}C$ for 10 min. Rice transplanting was carried out at 17 June with 25 days seedling using machine transplanting. Golden apple snail was used to prevent weed growth as middle size (1.5~1.7 kg/10a) at one week after rice transplanting. Amount of applied fertilizer in experimental plot was supplied with organic fertilizer for the shortage after harvest of hairy vetch (1,100 kg/10a). Bordeaux mixture was used to control of sheath blight and neck blast disease in all experimental plot at 19 Aug. Application of chitin culture solution was treated in manual organic cultivation at 2 and 15 Aug. At late growth stage, incidence rate of neck blast was the highest level at Hopyeongbyeo in conventional organic cultivation. Incidence rate of sheath blight in both Hopyeongbyeo and Onnuri was higher in conventional organic cultivation than in manual organic cultivation. Incidence of rice leaf folder was the highest level at Onnuri in conventional organic cultivation. Yield index in manual organic cultivation was increased by 13% and 38% at Onnuri and Hopyeongbyeo, respectively, compared with conventional organic cultivation. Head rice percentage in both Hopyeongbyeo and Onnuri was slightly increased in manual organic cultivation. These results indicate that high quality production of rice organic cultivation could be depending on management of safe fertilization with nutrient content in soil.