• Asian-Australasian Journal of Animal Sciences
• /
• 제31권9호
• /
• pp.1449-1457
• /
• 2018

Objective: The objective was to evaluate feed intake, digestibility, body weight change and carcass characteristics of sheep fed a basal diet of hay supplemented with banana leaves and silver leaf desmodium. Methods: Thirty yearling lambs with an average initial body weight of $15.85{\pm}1.6kg$ were grouped into six blocks of five rams in each block. The treatments were: hay alone (T1), hay+100% banana leaf (T2), hay+67% banana leaf+33% desmodium leaf (T3), hay+33% banana leaf+67% desmodium leaf (T4), andhay+100% desmodium leaf (T5). Three hundred grams of treatment diets were offered daily on as fed basis. The feeding and digestibility trials lasted for 84 and 7 days, respectively, followed by carcass evaluation. Results: The total dry matter (DM) intake for T3, T4, and T5 were greater (p<0.05) than those fed T1 and T2 diets. The lowest (p<0.05) organic matter (OM) intake was recorded in rams reared on T1 diet. The total crude protein (CP) intake was in the following order: T5>T4>T3>T2>T1. Ram lambs receiving supplementary diets had higher (p<0.05) DM, OM, CP, neutral detergent fiber and acid detergent fiber digestibility compared with the control diet. The empty body weight and slaughter weight was highest (p<0.05) in rams receiving T3, T4, and T5 diets. The average daily gain and feed conversion efficiency was highest (p<0.05) in rams receiving the supplementary diets. The dressing percentage on the basis of hot carcass weight linearly increased with increasing levels of desmodium. Rams reared on supplementary diet had higher (p<0.05) rib eye area compared with the control diet. Conclusion: In conclusion, when banana leaf is used as a supplement to poor quality grass, better body weight gain was obtained when fed in combination with desmodium.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권9호
• /
• pp.1228-1234
• /
• 2000

The reported study was conducted on range managed Malpura ewes that were non-breeding empty, were at an advanced stage of pregnancy, and were in early lactation, under a protocol of free grazing with concentrate supplementation at 1.00, 1.25 and 1.50% of their body weight to assess their plane of nutrition and nutrient intake. The biomass yield of pasture plots was 1689, 1820 and 2912 kg/ha in pregnancy, lactation and empty phases, respectively. In addition to natural shrubs and forbs, Cenchrus ciliaris (36.4%) and dead litter (31.6%) were the major component of pasture vegetation during pregnancy. The dead litter disappeared during the lactation and empty phase with a concomitant increase in distribution of Cenchrus ciliaris to 73.0 and 87.2% respectively. The daily dry matter consumption from supplemental concentrate and free grazing was 70.1, 57.3 and 63.5 g/kg $W^{0.75}/d$ with concentrate to roughage ratio of 40:60, 47:53 and 33:67 in pregnancy, lactation and empty phases respectively. Digestibility of DM and OM were similar in the three phases while CP digestibility was higher (p<0.0l) during lactation than other two phases. Digestibility of NDF, ADF and cellulose were higher (p<0.0l) in empty than pregnancy and lactation, while hemicellulose digestibility was similar in lactation and empty and lower in pregnancy phase. The ewes in ~hases of pregnancy, lactation and empty consumed 7.1, 7.7 and 6.1 g DCP and 197.2, 214.6 and 232.5 kcal DE/kg $W^{0.75}/d$ respectively. It is concluded that ewes maintained on semi-arid Cenchrus dominated pasture with concentrate supplementation during pregnancy, lactation and empty phases consumed 45.2, 45.1 and 35.2 g DCP/Mcal ME respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권10호
• /
• pp.1500-1506
• /
• 2017

Objective: High $NH_3$ emissions from poultry houses are reported to have negative impacts on health, welfare and safety of birds and humans, and on the environment. Objective of the present study was to determine the effects of two litter amendments on the $NH_3$ levels in broiler closed houses under hot-humid conditions. Methods: Giving a completely randomize design, nine closed houses, each housed 32,500 birds on paddy husk litter, were randomly allocated into two treatment (Mizuho; a bacterial culture mix and Rydall OE; an enzymatic biocatalyst) and control groups. $NH_3$ levels were determined thrice a day (0600, 1200, and 1800 h), at three heights from the litter surface (30, 90, and 150 cm), at 20 predetermined locations of a house, from day 1 to 41. Results: Rydall significantly reduced the $NH_3$ level compared to control and Mizuho. $NH_3$ levels at 30 cm were significantly higher than that of 90 and 150 cm. The $NH_3$ levels at 30 cm height were higher than 25 ppm level from day 9, 11, and 13 in Mizuho, control, and Rydall groups, respectively to day 41. $NH_3$ levels at 150 cm height were higher than maximum threshold limit of 50 ppm for human exposure from day 12, 14, and 15 in Mizuho, control, and Rydall groups, respectively to day 33. Being significantly different among each other, the $NH_3$ level was highest and lowest at 0600 and 1800 h. Litter amendments had no significant effects on growth performance. Rydall significantly increased the litter N content on day 24. Conclusion: It was concluded that the $NH_3$ levels of closed house broiler production facilities under tropical condition are so high that both birds and workers are exposed to above recommended levels during many days of the growing period. Compared to microbial culture, the enzymatic biocatalyst was found to be more effective in reducing $NH_3$ level.

• 한국농촌생활과학회지
• /
• 제8권2호
• /
• pp.119-124
• /
• 1997

In this study we tried to give a decision on propriety of working conditions, to present ideas on reducing work loads, and to grope for efficiency of agricultural works. For this we examined the actual working conditions of cultivating welsh onion in the summer ground. And we improved harmful factors that affect farmer's health by considering results of previous study and farmer's subjective sensation. And we measured. compared, and analyzed the farmer's work loads before and after improvement. The results of this study are as follows ; 1. According to examine the actual working conditions of cultivating welsh onion in the summer ground, farmers have experienced physical and mental chronic fatigue on the basis of farmer's appel to eye - fatigue and sun - burned skin on hot working environment including excessive ultraviolet rays, the rough ground condition, inconsistent arrangement of working stand and sorter, heavy - weared habits, and unsuitable working posture. 2. When we improved harmful factors that affect farmer's health, conformed the effects on important work efficiency index such as heart rate, electromyovolume, body temperature, and microclimate inside clothing and work loads were decreased by eliminating the hillock and obstacles of ground, decreasing the clothing weight, using proper clothing appliances such as hat and sunglasses, controlling height of working stand and sorter suitably, improving the working postures and methods as using assistant appliances, alloting the working time and sequence effectively and presenting the light gymnastic exercises and rest for fatigue restoration.

• 한국의류학회지
• /
• 제32권7호
• /
• pp.1129-1136
• /
• 2008

The gaiter is one of the personal protective equipments worn in various industrial sites. This study was performed on humans to investigate the physiological strain of wearing gaiters and to compare control gaiters that are currently on the market and new gaiters that are developed for alleviating heat stress. Experiments were conducted in a climatic chamber of WBGT $30.0\pm0.7^{\circ}C$ under five differed experimental conditions: None, Control A, Control B, New A, New B. The results were as follows. The temperature inside gaiters was significantly lower in both New A and New B than in both Control A and Control B and the difference between news and controls was 1$^{\circ}C$ (p<.01). The humidity inside gaiters in both New A and New B were higher than that in Control A, and lower than that in Control B (p<.01). The outermost surface temperature of the gaiter was the lowest in None and it increased in the following order: New B < New A < Control A < Control B. Mean skin temperature was higher by 0.14$^{\circ}C$ in wearing gaiters than in no gaiters. Skin temperatures in lower body were lower in Control than in New and skin temperature in upper body were higher in Control than in New (p<.01). Local sweat rate, total weight loss and subjective sensations did not show a significant difference according to the gaiters. It was concluded that wearing gaiters affected distribution of skin temperature and local sweat rate.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.533-536
• /
• 2009

The gasification technology is a very flexible and versatile technology to produce a wide variety products such as electricity, steam, hydrogen, Fisher-Tropsch(FT) diesels, Dimethyl Ether(DME), methanol and SNG(Synthetic Natural Gas) with near-zero pollutant emissions. Gasification converts coal and other low-grade feedstocks such as biomass, wastes, residual oil, petroleum coke, etc. to a very clean and usable syngas. Syngas is produced from gasifier including CO, $H_2$, $CO_2$, $N_2$, particulates and smaller quantities of $CH_4$, $NH_3$, $H_2S$, COS and etc. After removing pollutants, syngas can be variously used in energy and environment fields. The pilot-scale coal gasification system has been operated since 1994 at Ajou University in Suwon, Korea. The pilot-scale gasification facility consists of the coal gasifier, the hot gas filtering system, and the acid gas removal (AGR) system. The acid gas such as $H_2S$ and COS is removed in the AGR system before generating electricity by gas engine and producing chemicals like Di-methyl Ether(DME) in the catalytic reactor. The designed operation temperature and pressure of the $H_2S$ removal system are below $50^{\circ}C$ and 8 kg/$cm^2$. The iron chelate solution is used as an absorbent. $H_2S$ is removed below 0.1 ppm in the H2S removal system.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.11-21
• /
• 1999

This objective of this paper is to investigate the evaluation and indiction of human thermal comfort in building environment. The issue of defining the boundaries of acceptable thermal comfort conditions in buildings and urban may have significant implication for building design and also may have urban design by climate considerations. And then it is to apply the thermal comfort condition to environmental design by using passive methods in Korea. Since 1920. architects have conducted studies to measure thermal comfort in houses under hot and humid conditions, while industrial hygienists have studied the effects of temperature and humidity on the performance of factory workers. Thermal comfort can be influenced by many variables. This paper conducted to review the previous researches and the human heat balance equation, and to analyse in order to reveal the meaning and usage of the thermal comfort index in two traditional essays, Fanger's PMV and Gagge's ET* Their comfort indexes compared with each other. They were based on human heat balance equation and psychological and physiological responses in the laboratory tests. The researchers and the architectural engineers using thermal comfort index shall be careful in decided the use of indexes and be necessary to recognize the value concept of the design criteria for thermal comfort. Therefore, The opinion of the authors is that different comfort standards have to apply for each building and urban with different climatic conditions.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.388-394
• /
• 2003

밀폐 및 차폐 공간을 갖는 핫셀에서 사용후핵연료와 같은 고방사선 물질을 취급하고 있으며, 핵주기시설에서 마스터-슬레이브 매니퓰레이터는 원격취급장비로서 널리 사용되고 있다. 본 연구에서는 차세대관리공정의 디지털 목업을 구축하고 원격유지보수를 위한 매니퓰레이터의 작업영역 및 작업분석을 수행하였다. 실제 환경과 동일한 가상 작업환경을 갖는 디지털 목업은 3차원 그래픽으로 모델링 된 공정장치 및 원격 취급장비들로 구성된다. 모델링 된 매니퓰레이터는 기구학 및 동작범위에 대한 속성을 부여되고 외부 입력장치는 space ball을 사용하여 매니퓰레이터의 동작을 구현하였다. 또한, Tele-operation 인터페이스를 사용하여 6축 외부 입력장치와 연계한 시스템을 개발하였으며 외부 입력에 따른 매니퓰레이터의 동작에 대한 동기는 만족할 만한 응답을 보였다. 이는 가상환경에서 작업자 교육을 위한 시스템 개발에 유용할 것이다.

• 한국IT서비스학회지
• /
• 제12권2호
• /
• pp.387-410
• /
• 2013

Due to the development of information technology, Convergence and Creative Economy became hot issues. For example, products become more intelligent and services are likely to be connected and integrated around core services or provided as bundle solution. Meanwhile products and services are integrated in the context of mutual supplementation, which leads to Servitization of Products and Productization of Services in many industries. Previous studies have addressed Convergence with different terms and definitions such as Convergent, Multicategory Multifunctional Product, Clouding Service, Bundle and so on from one perspective such as consumers, suppliers or technology according to a wide range of academic approaches. Thus, this study attempted to suggest the most typical convergence products released in the convergence environment and categorize those products. Furthermore, this study has pointed out the problems in the New Product Development Framework discussed in the studies on marketing by taking the situation of the public sector into account and then suggested "New Service Development Framework in the Public Sector" that are different from traditional e-Gov. approach basically and will enable the government to create public information service and provide them to enterprises or citizens. It also emphasized the importance of Business Conceptualization Stage in the framework; argued that there is a necessity of an integrative study from the perspective of technology on the basis of the approach from the perspective of marketing and Policy such as a study of consumer behaviors, design and marketing channel and Policy Integration for the development and dissipation; and furthermore suggested the cases-the development/Diffusion of Transportation Card Service in Seoul and CFC (Call for Collaboration) in Singapore-in order to verify the framework. There is a need to supplement New Service Development Framework so it is able to reflect the distinct characteristics of the public sector from the academic perspective and be used as practical guidelines for SI (System Integration) business to shift into IT Service business. Last but not the least, this study has suggested the limitations and the directions for the future studies.

• 한국표면공학회지
• /
• 제44권1호
• /
• pp.13-20
• /
• 2011

This study investigated the high temperature oxidation behavior of Fe-22%Cr-5.8%Al alloy and the oxidation kinetics of the alloy were discussed. Bulk samples were prepared by VAM (vacuum arc melting) and hot forging. High temperature oxidation testes were isothermally conducted up to 100 hours in 79%$N_2$+21%$O_2$ environment at three different temperatures ($900^{\circ}C$, $1000^{\circ}C$, $1100^{\circ}C$). The weight gain was measured after oxidation according to oxidation time (2, 4, 6, 8, 10, 15, 20, 25, 30, 60, 80, 100 hours). The weight gain significantly increased with increasing oxidation temperature. As the temperature increased, the oxidized samples showed sequential formation of $Al_2O_3$, Cr-rich oxide, Fe-rich oxide. The activation energy of high temperature oxidation was obtained as 306.63 KJ/mol. $Al_2O_3$ were developed on the surface in the early stage of oxidation, representing protective role of oxidation. However, Fe-based and Cr-based oxides leaded to breakaway of oxide layer, thus resulted in the significant increase of additional oxidation.