• 에너지공학
• /
• 제28권1호
• /
• pp.22-29
• /
• 2019

발전소 온배수의 폐열을 회수하여 인근 농가에 난방 에너지를 공급하는 열펌프 시스템은 기존 난방방식 대비 에너지 사용량을 획기적으로 절감하고 온실가스의 배출을 줄이는 데에 기여할 수 있다. 제주대학교 컨소시움은 한국중부발전 제주화력본부에서 약 3 km의 원거리에 위치하고 있는 시설온실로 냉온수를 공급하기 위한 열펌프 시스템을 구축하였다. 본 논문에서는 열펌프 시스템의 구성과 더불어, 2018년 동절기에 수행된 난방성능 평가 실증운전 결과를 기술하였다. 열펌프 가동운전 시 대부분의 공급열 수송배관 내 담수의 온도강하는 $2^{\circ}C$ 이하로 유지됨을 확인하였다. 난방운전 시 열펌프의 성능계수는 4.0 보다 크며, 온배수를 열원으로 활용하여 최대 $50^{\circ}C$의 온수를 농가로 지속적으로 공급할 수 있음을 입증하였다.

• 한국태양에너지학회 논문집
• /
• 제35권5호
• /
• pp.21-29
• /
• 2015

In this study, the performance of hybrid solar air-water heater when the heated air was used as inlet air was investigated during air and liquid were heated simultaneously. Temperature difference between inlet air and ambient was set as $0^{\circ}C$, $13^{\circ}C$ and $22^{\circ}C$ and it was maintained during the daily operation. As a result, thermal efficiency of liquid heating was increased when the inlet air temperature was increased and heat gain of the water in heat storage tank was also increased with increment of temperature difference between inlet air and ambient temperature. On the contrary to this, the decrement of air heating efficiency and total efficiency of collector was confirmed with increment of inlet air temperature and it is considered that heat gain of liquid side is lower than heat loss of air side that occurring by using heated air as inlet air of collector. So, from these results, maximum temperature that the liquid in heat storage tank can reach was expected to increase if the return air or any heated air was used as inlet air. But air and total efficiency of hybrid solar air-water is decreased, so using outdoor air as inlet air is considered as better way on perspective of using of solar thermal energy by hybrid solar collector. However, it is hard to conclude that using outdoor air is better than heated air on the perspective of energy saving of building because the performance of heat storage performance was increased even air and total thermal efficiency was decreased, so the necessity of more profound consideration about these result in further research was confirmed for putting the hybrid solar air-water heater to practical use.

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.565-572
• /
• 2002

In order to control the root-zone temperature of greenhouse crops in the hydroponics at hot and cold season, heat pump system for cooling and heating was built and tested in this work. The system was air-to-water type and vapour compression type. The heating and cooling mode was selected by the four way valve. Capacity of the compressor was 3.75㎾ and heat transfer area of the evaporator and the condenser were 3.05㎡ and 0.6㎡, respectively. According to the performance test, it could supply heat of 42,360 to 64,372kJ/h depending on the water circulation rate of 600 to 1,500ℓ/h, respectively, when indoor air temperature was 10∼20$\^{C}$. COP of heat pump system was 3.0 to 4.0 in the heating mode. But, COP of the cooling mode was 1.3 to 2.1 at indoor temperature of 20∼35$\^{C}$. The feasibility test in the greenhouse the developed heating and cooling system was installed, showed that the heating cost of the developed system was only about 13% of that of the conventional heating system. The heating cost of the developed system was 367won/day(electric consumption 9.7㎾h/day), while that of the conventional system was 2,803won/day(oil consumption 7.7ℓ/day) at the same heating mode.

• 한국태양에너지학회 논문집
• /
• 제27권1호
• /
• pp.47-54
• /
• 2007

Interests on renewable energy are increased due to oil price and environmental problems aroused from the fossil energy usage. In this study, performances of a solar assisted hybrid heat pump system are analyzed by experimental method. The developed system could runs at two types of operating mode. When the storage temperature is higher than the set temperature, the stored hot water in storage tank is supplied to the load directly. On the other hand, when the storage temperature lower than the set temperature, the water inside of the storage tank is used as heat source of the heat pump. In this study, the system control temperature for the alternation of the operating mode is set to $40^{\circ}C$ of the storage tank outlet. As results, it is founded that the COP of the developed heat pump system shows between 3.0 and 3.5. It is resonable performance for the heating system with a renewable energy as secondary heat source. The solar collect used in this study could supplies heat to the storage tank at over 400 W/m2 solar intensity. If the irradiation is lower than the 400 W/m2, the circulation pump stored and it could not supply heat to the storage tank. It is found that the difference temperature between the outlet of the storage tank and collector is $3^{\circ}C$. Even though, the extended study should be conducted to get a optimum performance of the developed system with various operating condition and control strategies.

• 에너지공학
• /
• 제27권4호
• /
• pp.70-79
• /
• 2018

한국중부발전 제주화력본부에서 방류되는 온배수로부터 열원을 회수하여 약 3 km의 원거리에 위치하고 있는 신촌백합영농조합법인의 시설온실에 냉온수를 공급하기 위한 300 RT 용량의 열펌프 시스템을 구축하였다. 원거리 시설로 온배수열을 공급하기 위한 최적화 방안을 도출하였고, 수송관로의 온도와 누수여부를 모니터링하기 위한 설비들이 설치되었다. 본 논문에서는 제주 시설온실 냉난방을 위한 발전소 온배수 활용 열펌프 시스템의 구성과 주요기기에 대해 기술하였다. 2018년 하절기에 열펌프 시스템의 냉방성능을 평가하기 위한 실증운전을 수행하였다. 냉방운전 시 열펌프 시스템의 주요 위치에서 측정된 유체의 온도와 유량, 그리고 냉방 성능계수를 분석하여, 구축된 열펌프 시스템의 안정성과 냉방성능을 검증하였다.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.122-126
• /
• 2017

태양열 에너지를 이용하여 단순한 형태의 공기가열식 집열기를 이용하여 공기를 가열하고 이를 활용하여 생활공간의 난방문제를 해결하기 위한 장치를 개발하는데 목적을 두고 진행되고 있다. 현 시점에서 연구는 모델로 개발한 공기가열식 태양열에너지 집열기의 크기 변화에 따른 가용한 에너지의 량을 이론적으로 산출해 보고 이를 통해 개발 시스템의 가능성을 판단하고자 한다. 본 연구에서는 공기가열식 태양열 집열기의 공기가열성능을 판단하기 위하여, 특정 크기의 태양열 집열기에 일정한 일사량을 투하하였을 때, 모델 집열기 내부에서의 열전달 특성변화와 이를 통해 생산되는 공기의 온도($^{\circ}C$)와 생산량(kg/h)을, 유한체적법(Finite Volume Method)을 적용한 범용 열유동해석(CFD) 프로그램인 영국 CHAM사의 PHOENICS(1)를 이용하여, 분석한 결과를 구하였다. 분석한 결과에서 알 수 있듯이 집열기의 크기가 ($1.2m{\times}1.1m{\times}0.19m$)의 집열기에서 알루미늄으로 제작하는 내경 0.1m의 공기 가열관을 이용하여 가열할 수 있는 공기의 온도는 약 $40.5^{\circ}C$이며 이때 생산되는 공기의 생산량은 약 $161m^3/h$으로 산출되었다. 본 모델장치는 충분히 태양의 열에너지를 이용하여 실내공간의 온도를 인간이 활동하기에 적합한 활동의 환경을 유지하는데 활용할 수 있다고 판단된다.

• 한국태양에너지학회 논문집
• /
• 제37권1호
• /
• pp.47-57
• /
• 2017

Solar energy is one of the important renewable energy resources. It can be used for air heating, hot water supply, heat source of desiccant cooling system and so on. And many researches for enhancing efficiency have been conducted because of these various uses of solar thermal energy. This study was performed to investigate the air heating performance of hybrid solar air-water heater that can heat air and liquid respectively or simultaneously and finding method for improving thermal performance of this collector. This collector has both liquid pipe and air channel different with the traditional solar water and air heater. Fins were installed in the air channel for enhancing the air heating performance of collector. Also air inlet & outlet temperature, ambient temperature and solar collector's inner part temperature were confirmed with different air velocity on similar solar irradiance. As a result, temperature of heated air was shown about $43^{\circ}C$ to $60^{\circ}C$ on the $30^{\circ}C$ of ambient temperature and thermal efficiency of solar collector was shown 28% to 73% with respect to air velocity. Also, possibility of improvement of thermal performance of this collector could be ascertained from the heat transfer coefficient calculated from this experiment. Thus, it is considered that the research for finding optimal structure of hybrid solar air-water heater for enhancing thermal performance might be needed to conduct as further study based on the method for improving air heating performance confirmed in this study.

• 성인간호학회지
• /
• 제15권2호
• /
• pp.305-315
• /
• 2003

Purpose: To describe the status of the laboratory facilities, equipment and expenses for practice in a four-year nursing schools and to analyze mandatory requirements for laboratory facilities and equipment. Method: A descriptive survey research design was used. The participants were 49 of the 4-year nursing schools across the nation. The data were collected by e-mail. The return rate for questionnaires was 63.3% (n=31). Result: In 2001 the total expenses for laboratory practice were 21,865,230 won and the average per student was 102,418 won. Types of laboratories included single and complex. The mean size for laboratories was $318.7m^2$ and mean size for laboratories for fundamental nursing was $161.1m^2$. The range for number of students in a laboratory class was 20-30 for eight universities (30.8%). Among required laboratory equipment, items that were deficient in 50% in the universities were mercury and aneroid sphygmomanometers for children, electronic sphygmomanometers, Bell type fetal stethoscopes, sheepskin, beds for children, for gynecology, and electronic hilo beds. Among the elective equipment, items that were deficient in 50% of the universities were $O^2$ tents, Blackmore tubes, retractors, hot-water supply, and incentive spirometers. The number of items that needed to add to the equipment were 10 for required equipment and 22 for elective equipment. Conclusion: A standardized mandatory list of equipment for laboratory facilities and expenses for practice in 4-year nursing schools needs to be developed.

• 설비공학논문집
• /
• 제29권11호
• /
• pp.605-611
• /
• 2017

The purpose of this study is to calculate the energy consumption rate based on data regarding energy use in office buildings, and to confirm the general characteristics of energy consumption. The energy consumption rate of the building is calculated by dividing the energy consumption by the floor area. The energy consumption rate of small-sized office buildings was calculated as $101.48{\sim}201.55kWh/m^2{\cdot}year$ and in the case of medium-sized buildings, the range was $92.77{\sim}177.89kWh/m^2{\cdot}year$. In the case of small buildings, it was found that the energy consumption was $73.24kWh/m^2{\cdot}year$ in electronic device, $34.31kWh/m^2{\cdot}year$ in hot water supply, and $18.37kWh/m^2{\cdot}year$ in heating. In the case of medium-sized buildings, electronic devices was $73.08kWh/m^2{\cdot}year$, lighting was $18.35kWh/m^2{\cdot}year$ and heating, $15.37kWh/m^2{\cdot}year$. In all of the study buildings, the peak heating energy use was observed from 8:00 a.m. to 10:00 a.m during the winter, and the peak power management was required. Energy use at and around the midnight hour is confirmed to be 40~60% of weekly working hours, so it is necessary to manage power use at night time as well as during the day. In order to improve the accuracy of future studies, it is necessary to make efforts to secure the data with standardized energy measuring units for the various type of buildings.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.188.2-188.2
• /
• 2011

The use of renewable energy sources is becoming increasingly necessary to minimize the problems derived from the global warming impacts caused by the utilization of fossil fuels as well as their limited supply and reservoir. Also, localized heavy rain has occurred in many areas. As a result, suspended wood waste is being inflow into the dam and the problem of waste disposal has occurred. It is a unique renewable and alternative source for the production of energy. The experiment using wood waste (dry weight 25.0g) was conducted for extraction sugars such as xylose, lactose and glucose. For the sugar extraction from wood waste, hydrolysis experiment using wood waste was conducted by two steps. First step was reacted with 72% sulfuric acid (24.0N and 37.5 ml) for 1hr at $30^{\circ}C$ and second step was reacted at $105^{\circ}C$ for one hour after adding 2.45times of hot water. Extracted sugar was used in the experiment of sugar consumption to estimate feasibility of ethanol production using yeast(P. Stipitis and S cerevisiae). As a result, sugar extracted from wood waste was effective consumed by yeast(P. Stipitis and S cerevisiae). The consumption rate by yeast was S. cerevisiae was faster than that of P. stipitis. It can be confirmed that resource as ethanol production using wood waste was available.