• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.427-430
• /
• 2016

Internet of Things is one of the technologies that become a hot topic in recent years, is a technology that connects objects with wired or wireless network and share a information between objects. Gartner predicts that spread rapidly devices for end users, also increase revenue from enterprise equipment through the Annual 'Internet of Things' reports. By this trend, Internet of Things is becoming the platform of various kinds, the platform and the protocol for that have been developed a new technique. In this paper, we compared the performance of the communication protocol between devices in the Internet of Things, and propose a way to improve performance efficiency.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.27-28
• /
• 2019

Recently, a bed company detected a radon more than Red Politics and became a hot topic of conversation. This has led to increased interest in radon, and a number of free-of-charge bodies have also been established to recognize the dangers of radon. In addition, the Korean Institute of Geological and Resource Research is planning to assist the installation of radon alarm systems in 10,000 households nationwide, free of charge. Since radon is a colorless, odorless and tasteless gas that causes lung cancer, it aims to reduce lung cancer incidence by absorbing radon using bamboo activated carbon as a way to reduce it. Due to the use of bamboo activated carbon, radon concentration per hour tends to decrease as substitution rate increases, and table flow tends to decrease as substitution rate increases. Through this experiment, 30% of the replacement rate of bamboo activated carbon is judged to be the most suitable replacement rate.

• Earthquakes and Structures
• /
• v.8 no.4
• /
• pp.935-956
• /
• 2015

Structural Health Monitoring (SHM) of steel towers has become a hot research topic. From the literature, it is impractical and impossible to develop a "general" method that can detect all kinds of damages for all types of structures. A practical method should make use of the characteristics of the type of structures and the kind of damages. This paper reports a feasibility study on the use of measured modal parameters for the detection of damaged braces of tower structures following the Bayesian probabilistic approach. A substructure-based structural model-updating scheme, which groups different parts of the target structure systematically and is specially designed for tower structures, is developed to identify the stiffness distributions of the target structure under the undamaged and possibly damaged conditions. By comparing the identified stiffness distributions, the damage locations and the corresponding damage extents can be detected. By following the Bayesian theory, the probability model of the uncertain parameters is derived. The most probable model of the steel tower can be obtained by maximizing the probability density function (PDF) of the model parameters. Experimental case studies were employed to verify the proposed method. The contributions of this paper are not only on the proposal of the substructure-based Bayesian model updating method but also on the verification of the proposed methodology through measured data from a scale model of transmission tower under laboratory conditions.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.1-15
• /
• 2016

For a long time, a top priority in the nuclear industry was the safe, reliable, and economic operation of light water reactors. However, the development of accident-tolerant fuel (ATF) became a hot topic in the nuclear research field after the March 2011 events at Fukushima, Japan. In Korea, innovative concepts of ATF have been developing to increase fuel safety and reliability during normal operations, operational transients, and also accident events. The microcell $UO_2$ and high-density composite pellet concepts are being developed as ATF pellets. A microcell $UO_2$ pellet is envisaged to have the enhanced retention capabilities of highly radioactive and corrosive fission products. High-density pellets are expected to be used in combination with the particular ATF cladding concepts. Two concepts-surface-modified Zr-based alloy and SiC composite material-are being developed as ATF cladding, as these innovative concepts can effectively suppress hydrogen explosions and the release of radionuclides into the environment.

• Journal of Environmental Science International
• /
• v.16 no.11
• /
• pp.1231-1238
• /
• 2007

The promotion of walking and bicycling is recently a hot topic in the urban planning and design field. Many planners have already examined the many components of the land use-transportation connection and built environment-physical activity link. A rapidly growing area of urban form research is to measure the level of walk-ability in urban environments. With this background, this research conducted a preliminary study to develop the evaluation indicators of pedestrian environments. Based on the literature reviews on walking or pedestrian environments, we proposed the seventeen indicators related with pedestrian facilities, road attributes and walking environment. We also performed a questionary survey to evaluate the satisfaction of their neighborhood pedestrian environments for 302 randomly selected adults living in the City of Changwon, Gyeongsangnam-do. Finally, this research provided the valid model to evaluate the effects of physical environmental factors on the walking satisfaction using factor analysis and multiple regression analysis.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.4
• /
• pp.291-298
• /
• 2013

The concept of the satellite formation flight is area where it is actively study with expandability and safety compare to existing satellite. For execution of duty with more safety issue, it needs to consider hot topic of space debris for operation of formation flight. In this paper, it suggests heuristic algorithm to have avoidance maneuver for space debris towards operating flight formation. Indeed it covers, using common software, operating simulation to nearest space environment and not only to have goal of avoidance but also minimizing the usage of fuel and finding optimization for maximizing cycle of formation flight. For improvement on convergence speed of existing heuristic algorithm, it substitute to hybrid heuristic algorithm, PSOGSA, and the result of simulation, it represents the satisfaction of minimum range for successful avoidance maneuver and compare to not using avoidance maneuver, it keeps more than three times of formation maintenance performance. From these, it is meaningful results of showing several success goals like simple avoidance collision and fuel usage and decreasing number of times of maintaining formation maneuver.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.693-699
• /
• 2020

355nm UV pulse laser is irradiated on the surface of polyimide (PI) by LDW (Laser Direct Writing) method to produce a high sensitivity flexible humidity sensor using a simple one-step process. The LDW method continuously investigates 2-D CAD data using a galvano scanner and an F-lens. This method is non-contact, so it minimizes physical strain on the PI. Laser-induced graphene (LIG) produced by lasers has a high surface area due to its high flexibility and numerous pores and oxidizers compared to conductors. For this reason, it is highly useful as a flexible humidity sensor. The humidity sensor produced in this study was attached to the inside of a mask filter, which has become a hot topic recently, and its applicability was confirmed.The measurement of humidity measured the sensitivity, reactivity, stability and recovery behavior of the sensor by measuring changes in capacitance and resistance.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.439-443
• /
• 2007

Nowadays, activity recognition becomes a hot topic in context-aware computing. In activity recognition, machine learning techniques have been widely applied to learn the activity models from labeled activity samples. Most of the existing work uses only one learning method for activity learning and is focused on how to effectively utilize the labeled samples by refining the learning method. However, not much attention has been paid to the use of multiple classifiers for boosting the learning performance. In this paper, we use two methods to generate multiple classifiers. In the first method, the basic learning algorithms for each classifier are the same, while the training data is different (ASTD). In the second method, the basic learning algorithms for each classifier are different, while the training data is the same (ADTS). Experimental results indicate that ADTS can effectively improve activity recognition performance, while ASTD cannot achieve any improvement of the performance. We believe that the classifiers in ADTS are more diverse than those in ASTD.

• Journal of KIBIM
• /
• v.11 no.3
• /
• pp.55-66
• /
• 2021

Recently, Building Information Modeling(BIM) has become a hot topic in the construction industry such as quantity calculation, interference check, process management, and construction cost management. It is also trying to convert the existing 2D design to 3D design and introduce the BIM in various fields, thus, many new deliverable are being presented but there are many issues due to the lack of standard guides on the preparation and delivery criteria for such new deliverable and how to utilize performance data. Therefore, In order to develop the electronic delivery process, we analyzed the process related to the delivery of BIM digital models presented in domestic and international BIM guidelines and the delivery of products from the Korea National Railway. The analysis focused on the list of achievements, delivery process, quality review standards, and the utilization code system of the Korea National Railway through BIM guidelines and the National Railroad Service's business procedures. Based on these analysis results, it presents a plan to construct an functional module of electronic delivery.

• Journal of Distribution Science
• /
• v.19 no.12
• /
• pp.1-14
• /
• 2021

Purpose: For the last few decades, TQM has become a hot topic in the inner-disciplinary field in the production management line. Still, unfortunately, the study of TQM and Quality Output management is partially only attached to the tangible side in the production management line. Whereas theoretically, the implications of TQM require incremental improvement in all management lines (e.g., HRM, Marketing, Operations, and Distribution Management). Therefore, starting from the main problem, this study aims to analyze the effect of total quality management, Organizational Culture, Perceived Distribution of Quality Awareness, and quality output through a more in-depth analysis. Research design, data and methodology: We conducted a survey of 170 respondents from managers, staff, and employees from 48 companies in Indonesia. We used a quantitative approach with the SEM method to answer this study's problem formulation and hypotheses. Results: The results of our research stated that based on the demonstration of statistical test results, all hypotheses were positive and significant, both direct and indirect relationship demonstrations. Conclusions: Universally, the findings in this study illustrate that the supporting factor for creating value-added in TQM and Quality output lies in the optimal and positive organizational culture and Perceived Distribution Quality Awareness factors in the organization.