• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.241-246
• /
• 2008

In this paper, we analyze the I-V curve and hot-spot phenomenon caused by solar cells' serial and parallel connected circuit. The mis-match loss of parallel interconnection with low Isc string decrease lower than serially interconnected one and temperature caused by hot-spot does. Also, mis-match loss of parallel interconnection with low Voc string increase more than serially interconnected one. The string having low Voc happened hot-spot phenomenon when open circuit. The bad solar cell in string gives revere bias to good solar cell and make hot-spot phenomenon. If we consider the mis-match loss, when designing PV module and array. the efficiency of PV system might increase.

• 에너지공학
• /
• 제1권1호
• /
• pp.58-65
• /
• 1992

인산형 연료전지의 전극성능의 향상을 위해 Hot Pressing공정을 사용하여 Pt이 담지된 다공성 탄소전극(Pt/C)을 제조하였다. Hot pressing의 조건, 촉매층에서의 PTEE 함량을 변화시켜 제조한 Pt/C 전극의 전기화학적 산소환원특성 및 인산형 단위전지 성능특성을 비교하였다. 실험결과 Hot Pressing의 최적조건은 36$0^{\circ}C$, 10kg/$\textrm{cm}^2$이었다. 최대성능은 촉매층에 30wt%의 PTFE 함량을 가진 전극에서 얻어졌으며, 이때 백금의 이용율은 80%이었다. 단위전지의 성능측정 결과, hot pressing한 전극의 성능은 700㎷에서 200mA/$\textrm{cm}^2$이었으며 200시간동안 안정적인 성능이 유지되었다.

• 동의신경정신과학회지
• /
• 제22권2호
• /
• pp.107-128
• /
• 2011

Objectives : This experiment was designed to investigate the efficacy of DDTCMT hot water extract & ultra-fine powder on Alzheimer's Disease Model. Methods : The effects of the DDTCMT hot water extract on expression of IL-$1{\beta}$, IL-6, TNF-${\alpha}$, COX-2, NOS-II, IL-10, IL-1 receptor antagonist mRNA and production of IL-$1{\beta}$, IL-6, TNF-${\alpha}$ in BV2 microglial cell line treated by lipopolysacchaide(LPS) were investigated. Expression of NO, ROS in BV2 microglial cell line treated by LPS and AChE activity in PC-12 cell treated by NGF were investigated. anti-AChE was observed through Western blot analysis. The effects of the DDTCMT hot water extract & ultra-fine powder on the behavior of the memory deficit mice induced by scopolamine were investigated. Results : 1. The DDTCMT hot water extract significantly decreased the production of mIL-6, mNOS-II, mTNF-${\alpha}$, and increased the production of mIL-10, mIL-1 receptor antagonist. 2. The DDTCMT hot water extract significantly suppressed the production of IL-$1{\beta}$, IL-6, TNF-${\alpha}$ in BV2 microglial cell line treated by LPS. 3. The DDTCMT hot water extract significantly suppressed the NO and ROS production in BV2 microglial cell line treated by LPS. 4. The DDTCMT hot water extract groups showed inhibition of AChE activity in NGF treated PC-12 cell line. 5. The DDTCMT hot water extract suppressed anti-AChE expression in NGF treated PC-12 cell line was observed by Western blot analysis. 6. The DDTCMT hot water extract & ultra-fine powder groups showed significantly inhibitory effect on the scopolamine -induced impairment of memory in the experiment of Morris water maze. Conclusions : These results suggest that the DDTCMT hot water extract & ultra-fine powder may be effective for the prevention and treatment of Alzheimer's disease.

• Food Science and Biotechnology
• /
• 제17권6호
• /
• pp.1185-1190
• /
• 2008

When 10 kinds of herbal medicines were fractionated into hexane, MeOH, cold-water, and hot-water extracts, hot-water extracts from Acanthopanax senticosus (AS), Glycyrrhiza uralensis (GU), Cichorium intybus (CI), and Polygonatum odoratum (PO) showed the potent intestinal immune system modulating activity (1.72-, 1.62-, 1.60-, and 1.53-fold of control at $100{\mu}g/mL$, respectively). Especially, hot-water extracts from AS (215% compared with the control) and GU (187%) also had macrophages stimulating activity and mitogenic activity of splenocytes (7.1- and 6.5-fold) at $100{\mu}g/mL$. In addition, the effects of hot-water extracts from herbal medicines on anticancer activities were studied in mice. Hot-water extracts from AS and GU enhanced cytotoxicity of natural killer cell against cancer cell, Yac-1 (37 and 34% cytotoxicity) at E/T ratio 100:1, and colon 26-M3.1 cancer cell lines had significantly inhibited (82.1 and 75.2%) in experimental lung metastasis. These results suggest that hot-water extracts from A. senticosus and G. uralensis can be used as biological response modifiers to stimulate immune system and inhibit tumor.

• 한국미생물·생명공학회지
• /
• 제25권2호
• /
• pp.178-182
• /
• 1997

This study was carried out particutarly focusing on the antitumor effects of extracts obtained from mushroom, Daedalea dickinsii against Hela cell, Hep $G_{2}$, cell, L 929 cell and Sarcoma-180. Antitumor effect of hot water extracts obtained from Daedalea dickinsii against Hela cell showed at the highest level of 70% when adiministrated at the concentration of 1.5 mg/100 ml, however Hep $G_{2}$, cell inhibited 40% at the same concentration of hot water extracts. Antitumor effects of methanol extract of Daedalea dickinsii against Hela cell indicated at the highest level of 60% when 4 mg/ml was administerated. Antitumor effect of hot water extract of Daedalea dickinsii inhibited 51.03% against L929 cell. The solid tumor sarcoma-180 growth inhibition of methanol extract of Deadalea dickinsii inhibited 45.67% when administrated at the concentration of 60mg/kg, and the life prolongation was higher 30.88% than that control group.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.89-91
• /
• 2006

An analysis of a multi-pin remote welding for a DUPIC fuel fabrication was made to establish the optimum welding processes in a hot cell environment. An initial investigation for hands-on fabrication outside the hot cell was performed, and the constraints of a hot cell welding were considered. Preliminary welding performances to improve the RW process were also examined. The RW process was determined to be the best in a hot cell environment for joining the end plate to the end caps. This paper presents an outline of the developed RW machine for a DUPIC fuel fabrication and compares the characteristics of a Zr-4 end plate welding by using electrical resistance and LB methods. The weld nuggets of RW specimens and torque strengths of resistant and LB welded zones were also investigated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.100.6-100
• /
• 2002

The crane and the master-slave manipulators (MSM) are widely used as a remote handling device in nuclear facilities such as the hot cell. The equipment to be installed in the hot cell should be optimally placed within the workspace of the wall-mounted slave manipulator for the maintenance operation. Also, the slave manipulator with the end effectors should be properly positioned and oriented for the dedicated maintenance operation. Hence, the workspace and the motion of the slave manipulator, as well as, the remote operation task should be analyzed before installing the manipulators and the hot cell equipment. For this purpose, the 3D graphic simulator, which simulates the remote operation o...

• Journal of Welding and Joining
• /
• 제21권6호
• /
• pp.20-25
• /
• 2003

Various welding methods such as Gas Tungsten Arc Welding(GTAW), magnetic force electrical resistance welding and Laser Beam Welding(LBW) are now available for end cap closure of nuclear fuel rods. Even though the resistance and GTA welding processes are widely used in manufacturing commercial fuel rods, they can not be recommended for the remote seal welding of fuel rods in the hot cell Facility due to the complexity of the electrode alignment, the difficulty in replacing parts in a remote manner and the large heat input for the thin sheath. Therefore, the Nd:YAG laser system using optical fiber transmission was selected for the end cap welding of irradiation fuel rods in the hot cell. The remote laser welding apparatus in the hot cell Facility was developed using a pulsed Nd:YAG laser of 500 watt average power with an optical fiber transmission. The weldment quality such as microstructure and mechanical strength was satisfactory. The optimum conditions of laser welding for encapsulating irradiation fuel rods in the hot cell were obtained.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.337-344
• /
• 2003

고방사성물질을 취급하는 핫셀내 원격취급장치인 MSM의 작업영역을 벗어나는 경우의 공정장치부품 유지보수공정을 개발하였다. 이를 위하여 핫셀 공정에 대한 가상 목업을 구축하였으며, 이를 이용하여 MSM 작업영역, 작업자 시각영역을 분석하고, 그래픽 가상목업의 충돌감지 기능을 이용한 서보 조작기의 경로계획을 수립하였다. 또한, 분석한 결과를 토대로 서보조작기에 의한 사각지역 내 부품 유지보수 공정을 설정하였으며, 설정된 공정은 그래픽 전산모사를 통하여 검증하였다. 제안된 유지보수 공정은 실제 핫셀공정 수행시 유용하게 활용될 것이며, 그래픽 가상목업은 다양한 핫셀 공정에 대한 분석 및 훈련 시스템으로 활용하여, 작업 효율성 및 안전성 향상에 기여할 것으로 기대된다.

• Journal of Communications and Networks
• /
• 제6권3호
• /
• pp.216-225
• /
• 2004

In a cellular network, if there are too many data users in a cell, data may suffer long delay, and system's quality-of-service (QoS) will degrade. Some traditional schemes such as dynamic channel-allocation scheme (DCA) will assign more channels to hot (or overloaded) cells through a central control system (CC) and the throughput increase will be upper bounded by the number of new channels assigned to the cell. In mobile-assisted data forwarding (MADF), we add an ad-hoc overlay to the fixed cellular infrastructure and special channels-called forwarding channels- are used to connect mobile units in a hot cell and its surrounding cold cells without going through the hot cell's base station. Thus, mobile units in a hot cell can forward data to other cold cells to achieve load balancing. Most of the forwarding-channel management work in MADF is done by mobile units themselves in order to relieve the load from the CC. The traffic increase in a certain cell will not be upper bounded by the number of forwarding channels. It can be more if the users in hot cell are significantly far away from one another and these users can use the same forwarding channels to forward data to different cold neighboring cells without interference. We find that, in a system using MADF, under a certain delay requirement, the throughput in a certain cell or for the whole net-work can be greatly improved.