• Parasites, Hosts and Diseases
• /
• v.26 no.4
• /
• pp.229-238
• /
• 1988

In vitro culture of Toxoplasma gondii in HL-60 cells and cell-mediates immunity against Toxoplasma in dimethylsulfoxide(DMSO) -induced HL-60 cells, i.e., differentiation into granulocytes, were pursued. HL-60 calls were treated with various concentrations of DMSO, and 1.3%(v/v) for 3 day incubation was chosen as the optimal condition icy differentiation into granulocytes. The degree of differentiation was assayed in physiological and functional aspects in addition to morphological point. When treated with 1.3% DMSO for 3 days, HL-60 cells did not synthesiar DNA materials beyond background level, and showed active chemotactic response to chemotactic peptide, formal-methionyl-leucyl-phenylalanine(FMLP). Morphologically promyelocytes of high nuclearlcytoplasmic(NIC) ratio changed to granulocytes of relatively low WJC ratio. The relationships between HL-60 cells or DMSO-induced HL-60 cells and Toxoplasma were examined after stain with Giemsa and Buorescent dye (acridine orange). HL-60 cells did not show any sign of torso- plasmacidal activity but showed intracellular proliferation of Texoplasma to form rosette for 72 hr co-culture. In contrast, OMSO-induced HL-60 cells phagocytosed Toxoplasma within 1 hr, and performed a process of intracellular digestion of Toxoplasma thereafter. With the above results, it is suggested that phagosome-Iysosome fusion is one of the critical events for the parasitism by Toxoplasma or for susceptibility of host cells. The in vitro culture system of this study has offered a defined condition to study the protozoan parasite-host cell interactions.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2007

Purpose: To evaluate the effect of compression on the distracted area in new bone formation during mandibular distraction osteogenesis in rabbits. Materials and method: Sixteen rabbits, weighing approximately 2 Kg, and the prefabricated distraction device were used. With the rabbits under general anesthesia, we performed vertical osteotomies between the anterior and posterior mandibular teeth and then placed the distraction device. After a 5 -day latency period, the mandible was distracted to a length of 10.0 mm at a rate of 1 mm/day and then immediately compressed 4 mm in the experimental group (n=8). In the control group (n=8), the mandible was distracted to a length of 6.0 mm at a rate of 1 mm/day. Rabbits in the control group were killed at 2 and 8 weeks during the consolidation period. The specimens were evaluated with light microscope after H & E stain. Histomorphometric analysis was done at 8 week specimens. Results: All experimental animals showed mandibular elongation on the macroscopical and radiographic evaluations. At 2 week, immature bone formation was observed from the surface of the host bone margins with collagen fibers arranged parallel to the direction of distraction in the control group; in the experimental group, immature bone formation was observed adjacent to the host bone, and the collagen fibers were not arranged uniformly. At 8 week, spindle-shaped new bone formation was seen in the direction of distraction in distracted area of the control group, while in the experimental group, the newly formed bone was arranged in a multidirectional manner, like the pattern of trabeculae. In the histomorphometric analysis of 8 weeks, the area of bone deposition was $2.12{\pm}\;0.75\;inch^2$ in the experimental group and $0.87{\pm}0.51\;inch^2$ in the control group (p<0.01). The bone deposition ratio was $29.60{\pm}10.50%$ in the experimental group and $12.10{\pm}7.17%$ in the control group (p<0.01). Conclusion: These results suggest that compression after over-distraction during the mandibular distraction osteogenesis is an effective method of increasing the amount of newly formed bone in distracted area.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.3
• /
• pp.215-223
• /
• 2021

Purpose: Distal radius fractures in youth are treated conservatively in most cases, but there are some cases of redisplacement in the follow-up period after cast immobilization, even after complete reduction. This study examined the risk factors of redisplacement in reduced unstable distal radius fractures. Materials and Methods: From February 2011 to June 2018, 44 unstable distal radius fractures were managed with a closed reduction and cast immobilization. The patients were aged between 6 and 14 years. The cases of redisplacement were analyzed with the fracture characteristics (fracture obliquity, fracture level ratio, ulnar fracture combined), cast qualities (gap index, cast index, 3 point index, and radius-2nd metacarpal angle) and host factors (age, sex). Results: The mean angulation in the union was 9.2° (0°-32.8°). In the categorical grouping 29 cases were within 10° angulation, and 15 cases were more than 10°. No significant differences in the factors of the cast indices or host factors were noted. The meaningful factor was the fracture level calculated by the relative width of the fracture site divided by the sum of width of diaphysis and epiphysis (p=0.001) and combined ulnar fracture (p=0.019). Conclusion: Unstable distal radius fractures should be treated with more stubborn guidelines lest the fracture loses its anatomical alignment. In particular, in patients with less remodeling power, operative treatment would secure a better result if the fracture occurs in a more proximal location.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.199-199
• /
• 2016

Commercially pure titanium (cp-Ti) and Ti alloys (typically Ti-6Al-4V) display excellent corrosion resistance and biocompatibility. Although the chemical composition and topography are considered important, the mechanical properties of the material and the loading conditions in the host have, conventionally. Ti and its alloys are not bioactive. Therefore, they do not chemically bond to the bone, whereas they physically bond with bone tissue. The electrochemical deposition process provides an effective surface for biocompatibility because large surface area can be served to cell proliferation. Electrochemical deposition method is an attractive technique for the deposition of hydroxyapatite (HAp). However, the adhesions of these coatings to the Ti surface needs to be improved for clinical used. Plasma electrolyte oxidation (PEO) enables control in the chemical com position, porous structure, and thickness of the $TiO_2$ layer on Ti surface. In addition, previous studies h ave concluded that the presence of $Ca^{+2}$ and ${PO_4}^{3-}$ ion coating on porous $TiO_2$ surface induced adhesion strength between HAp and Ti surface during electrochemical deposition. Silicon (Si) in particular has been found to be essential for normal bone and cartilage growth and development. Zinc (Zn) plays very important roles in bone formation and immune system regulation, and is also the most abundant trace element in bone. The objective of this work was to study electrochemical characteristcs of Zn and Si coating on Ti-6Al-4V by PEO treatment. The coating process involves two steps: 1) formation of porous $TiO_2$ on Ti-6Al-4V at high potential. A pulsed DC power supply was employed. 2) Electrochemical tests were carried out using potentiodynamic and AC impedance methoeds. The morphology, the chemical composition, and the micro-structure an alysis of the sample were examined using FE-SEM, EDS, and XRD. The enhancements of the HAp forming ability arise from $Si/Zn-TiO_2$ surface, which has formed the reduction of the Si/Zn ions. The promising results successfully demonstrate the immense potential of $Si/Zn-TiO_2$ coatings in dental and biomaterials applications.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.255-271
• /
• 2009

This study was examined interpretation of making techniques and provenance interpretation of raw materials for the potteries from the Nongseori site in Giheung based on archaeometric characteristics. The potteries are classified into three groups according to the archaeological age. The texture of Neolithic age potteries is sandy soil added a lot of temper such as talc and mica, and Bronze age potteries contain sandy materials which occur naturally include quartz, orthoclase, plagioclase and mica. On the other hand, Proto-three Kingdom Age potteries made of silty soil that sift out coarse minerals from the clay. But all pottery and soil samples in the study were very similar patterns with geochemical evolution trend. This result is sufficient evidence that all pottery samples were produced using the same raw materials from the host rocks around of the site area. The Neolithic age potteries had loose texture and fired probably about 700 to $760^{\circ}C$. The Bronze age potteries had experienced firing about 850 to $900^{\circ}C$. And Proto-three Kingdom Age potteries had compact textured and fired from 900 to $1,050^{\circ}C$. The making techniques of potteries are not represented discontinuation characteristics about the periodic time sequences, and are suggested that revealed a transitional change patterns for production techniques.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.92-100
• /
• 2004

The host rocks of brick-shaped stone pagoda in the Bunhwangsa temple are lots of kinds andesitic rocks, which has gone through mechanical and chemical weathering. As the overall observation, the pagoda is serious damages by air pollutants, and the northeast parts show the much advanced state of turning white, while the southeast parts are heavily cracked in the materials. The rocks of brick-shaped pagoda body are in a relatively stable condition of weathering and damage except for the abrasion and cracks of the corners. The rocks of the pagoda roof suffer from more symptoms including multiple peel-offs, exfoliation, cracks forming round lines, and falling off stone pieces. The pagoda roof rocks are dominated by the thriving leafy lichens and mosses, especially, there are higher plants (selaginella involvens, dandelions) taking root actively between the brick stones and content mortar. There are even light gray precipitates like stalactites between the rocks of the body, In particular, the 1st and 2nd floor in the east side and the body parts in the north side are the most serious. Their major minerals are calcite, gypsum and clay minerals. The rocks of the stylobate and the tabernacle in all the four directions are composed mainly of granitic rocks. The materials consisting of the tabernacles show the severe splits and distortion, which causes the structural instability. The stylobate rocks are heavily contaminated by some weeds with the often marks of inorganic contamination by secondary hydroxides. The central part of the east stylobate has been sinking, while that of the 1st floor west stylobate is protruded nesting a line of cracks. Accordingly, the inside of the tabernacle is always humid with the constant introduction of rainwater. The stone lion standing in the southeast and northeast side are alkali granite, while that in the southwest and northwest lithic tuff. Each of the stone lion also coated with various colored lichens, mosses, algae, bacteria and bryophyte. The external materials of the pagoda have deteriorated the functions of the rocks and made the loss, falling off, and biological contamination even worse due to the surface weathering. Thus it's urgent to come up with scientific restoration and conservation measures through clinical tests.

• Journal of Periodontal and Implant Science
• /
• v.26 no.2
• /
• pp.334-349
• /
• 1996

Regeneration of the periodontal tissue destroyed by periodontal disease is one of the final goals of periodontal therapy. In the past few years, periodontists have used various alloplastic grafting materials in an attempt to regenerate bone lost from periodontal disease. These materials have used widely because they have shown to be nontoxic, biologically compatible with surrounding host tissue and chemically similar to bone. The purpose of this study was to investigate the effect of Porous Resorbable Calcium Carbonate and Porous Replamineform Hydroxyapatite on the regeneration of the alveolar bone and the healing of roots transplanted into the periodontally diseased extraction sockets of dogs. The experimental chronic periodontitis was induced by elastic ligatures on the 2nd and 3rd mandibular premolars of 2 adult dogs for 8weeks after surgically creating periodontal defect. The extracted root were split in half along the long-axis, and the extend of plaque exposure was marked on the root surfaces with burs. The roots were inserted in extraction sockets with Porous Resorbable Calcium Carbonate(PRCC) in left side and with Porous Replaminefrom Hydroxyapatite(PRH) in right side. The flaps were sutured to cover the sockets completely. The animals were sacrificed after 12 weeks of healing, and the specimens were examined histologically. The results were as follows: 1. No inflammatory reactions were observed in either groups. 2. Hoot resorption was observed in both groups while the general outline of the roots were maintained. 3. PRCC was almost completely resorbed and replaced with new bone, while R.H.A. was not resorbed & remained encased in newly-formed C-T and alveolar bone. 4. PRH was encapsulated with alveolar bone which has been deposited from apical & lateral area of the sockets, while the coronal portion of the sockets were filled with C-T. 5. In both groups, the resorbed portions of the roots were replaced with new bone. These results suggest that either PRCC or PRH may not interfere with bone formation or healing in extraction sockets, and in some degree, retard the root resorption. Because the roots maintained in anatomy, we think that graft materials prevent the root resorption.

• 한국환경농학회:학술대회논문집
• /
• 2009.07a
• /
• pp.273-282
• /
• 2009

The transmissible spongiform encephalopathies (TSEs) disease group are fatal neurodegenerative disorders affecting a wide range of hosts. The group includes kuru and Creutzfeldt-Jakob disease (CJD) in humans, scrapie in sheep and goats and Bovine spongiform encephalopathy (BSE) in cattle. The exact nature of the infectious agent involved in the transmission of these diseases remains controversial. However, a central event in their pathogenesis is the accumulation in infected tissues of an abnormal form of a host-encoded protein, the prion protein (PrP). Whereas the normal cellular protein is fully sensitive to protease ($PrP^{sen}$), the disease-associated prion protein ($PrP^d$) is only partly degraded ($PrP^{res}$), its amino-terminal end being removed. BSE was first reported in the mid-80s in the UK. Ten years later, a new form of human prion disease, variant CJD (vCJD) developed in the wake of the BSE epidemic, and there is now strong scientific evidence that vCJD was initiated by the exposure of humans to BSE-infected tissues, thus indicating a zoonotic disease. However, the ban on the feeding of animal-derived proteins to ruminants, and the apparent lack of vertical transmission of BSE, have led to a decline in the incidence of the disease within cattle herd and therefore, an assumed decreased risk for human contacting vCJD. The origin of the original case(s) of BSE still remains an enigma even though three hypotheses have been raised. Hypotheses are i) sheep- or goat-derived scrapie-infected tissues included in meat and bone meal fed to cattle, ii) a previously undetected sporadic or genetic bovine TSE contaminating cattle feed or iii) originating from a human TSE through animal feed contaminated with human remains. A host cellular membrane protein ($PrP^C$), which is abundant in central nervous system tissue, appear to be conformationally altered in the diseased host into a prion protein ($PrP^{Sc}$). This $PrP^{Sc}$ is detergent insoluble and partially protease-resistant ($PrP^{res}$). The term $PrP^{res}$ is normally used to describe the protein detected after protease treatment, in techniques such as Western immunoblotting, and enzyme-linked immunosorbant assay using fresh/frozen tissue. Immunohistochemistry may performed with formalin-fixed tissues. Also, clinical signs of the BSE are one of the major diagnostic indicators. Recently, atypical forms (known as H- and L-type) of BSE have appeared in several European countries, Japan, Canada and the United States. An unusual case was also reported in a miniature zebu. The atypical BSE fall into two groups based on the relative molecular mass (Mm) of the unglycosylated $PrP^{res}$ band relative to that of classical BSE, one of the higher Mm (H-type) and the other lower (L-type). Both types have been detected worldwide as rare cases in older animals, at a low prevalence consistent with the possibility of sporadic forms of prion diseases in cattle. This raises the unwelcome possibility that vCJD could increase in the human population. Now, active surveillance program against BSE is going on in Korea. In regional veterinary service lab, ELISA is applied to screen the BSE in slaughter and confirmatory tests by Western immunoblotting and immunohistochemisty are carried out if there are positive or suspect in the screening test. Also, the ruminant feed ban is rigorously enforced. Removal of specified risk materials such as brain and spinal cord from cattle is mandatory process at slaughter to prevent the infected material from entering the human food chain.

• Korean Journal of Microbiology
• /
• v.51 no.1
• /
• pp.39-47
• /
• 2015

Secondary metabolism in actinomycetes has been known to be controlled by a small molecule, ${\gamma}$-butyrolactone autoregulator, the binding of which to each corresponding receptor leads to the regulation of the transcriptional expression of the secondary metabolites. We expected that expression of an autoregulator receptor or a pleiotropic regulator in a non-host was to be gained insight of effective production of new metabolic materials. In order to study the function of the receptor protein (seaR), which is isolated from Saccharopolyspora erythraea, we introduced the seaR gene to Streptomyces coelicolor A3(2) as host strains. An effective transformation procedure for S. coelicolor A3(2) was established based on transconjugation by Escherichia coli ET12567/pUZ8002 with a ${\varphi}C31$-derived integration vector, pSET152, which contained int, oriT, attP and $ermEp^*$ (erythromycin promotor). Therefore, the pEV615 was introduced into S. coelicolor A3(2) by conjugation and integrated at the attB locus in the chromosome of the recipients by the ${\varphi}C31$ integrase (int) function. Exconjugant of S. coelicolor A3(2) containing the seaR gene was confirmed by PCR and transcriptional expression of the seaR gene in the transformant was analyzed by RT-PCR. In case of S. coelicolor A3(2), a phenotype microarray was used to analyze the phenotype of transformant compared with wild type by seaR expression. After that, in order to confirm the accuracy of the results obtained from the phenotype microarray, an antimicrobial susceptibility test was carried out. This test indicated that sensitivity of the transformant was higher than wild type in tetracycline case. These results indicated that some biosynthesis genes or resistance genes for tetracycline biosynthesis in transformant might be repressed by seaR expression. Therefore, subsequent experiments, analysis of transcriptional pattern of genes for tetracycline production or resistance, are needed to confirm whether biosynthesis genes or resistance genes for tetracycline are repressed or not.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.250-250
• /
• 2012

Organic light-emitting diodes (OLED) and polymer light emitting diodes (PLED) have been regarded as the candidate for the next generation light source and flat panel display. Currently, the most common OLED industrial fabrication technology used in producing real products utilizes a fine shadow mask during the thermal evaporation of small molecule materials. However, due to high potential including low cost, easy process and scalability, various researches about solution process are progressed. Since polymer has some disadvantages such as short lifetime and difficulty of purifying, small molecule OLED (SMOLED) can be a good alternative. In this work, we have demonstrated high efficient solution-processed OLED with small molecule. We use CBP (4,4'-N,N'-dicarbazolebiphenyl) as a host doped with green dye (Ir(ppy)3 (fac-tris(2-phenyl pyridine) iridium)). PBD (2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole) and TPD (N,N'diphenyl-N,N'-Bis (3-methylphenyl)-[1,1-biphenyl]-4,4'-diamine) are employed as an electron transport material and a hole transport material. And TPBi (2,2',2''-(1,3,5-phenylene) tris (1-phenyl-1H-benzimidazole)) is used as an hole blocking layer for proper hole and electron balance. With adding evaporated TPBi layer, the current efficiency was very improved. Among various parameters, we observed the property of OLED device by changing the thickness of hole transporting layer and solvent which can dissolve organic material. We could make small molecule OLED device with finding proper conditions.