• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.140-142
• /
• 2011

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.638-644
• /
• 2010

We have carry out numerical simulation of the electric-optical characteristics of organic light emitting diodes with gradient-doped emitting layer which were reported to be effective in improving luminous efficiency and lifetime. In this paper, the basic structure is comprised of ITO/NPB/$Alq_3$:C545T[%]/$Alq_3$/LiF/Al, six devices by separating the emitting layer of $Alq_3$:C545T[%] were studied. As the result, the uniformly-doped devices exhibited superior luminous efficiency-current density characteristics over conventional undoped device. In the case of gradient-doped devices, electric-optical characteristics were improved similar to uniformed-doped devices, unusually the distribution of traped-charge density in the OLED devices was shown as the staircase.

• Smart Structures and Systems
• /
• 제4권1호
• /
• pp.35-46
• /
• 2008

In this paper the authors address the problem of comparing two different smart damping techniques using the numerical modelling of the electro-mechanical impedance for plate structures partially treated with active constrained layer damping treatments. The paper summarizes the modelling procedures including a finite element formulation capable of accounting for the observed behaviour. The example used is a smart cantilever plate structure containing a viscoelastic material (VEM) layer sandwiched between a piezoelectric constrained layer and the host vibrating plate. Comparisons are made between active constrained layer and active damping only and based on the resonance frequency amplitudes of the electrical admittance numerically evaluated at the surface of the piezoelectric model of the vibrating structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.155-155
• /
• 2010

We have investigated organic light-emitting devices by doping phosphorescent orange and fluorescent blue emitters into the separate layers of single host. The electroluminescence spectra and current efficiency were strongly dependent on the location of each doped layers. The luminance-voltage (L-V) characteristics of the device2 (ITO/Hole Transport Layer/Orange Phosphorescent emissive layer/Blue Fluorescent emissive layer/Electron Transport Layer/liF/Al) showed the maximum current efficiency of 19.5 cd/A.

• 한국전기전자재료학회논문지
• /
• 제22권4호
• /
• pp.323-326
• /
• 2009

We have developed blue-emitting phosphorescent organic light emitting diodes (OLEDs) using 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) and tris (8-quinolinolato)aluminum ($Alq_3$) electron transport layers. As blue dopant and host materials, bis[(4,6-di-fluorophenyl)-pyridinate-N,C2']picolinate (FIrpic) and N,N'-dicarbazolyl-3,5-benzene (mCP) were used, respectively. The driving voltage, current efficiency and emission characteristics of devices were investigated. While the driving voltage was about $1{\sim}2$ V lower in the device with an $Alq_3$ layer, the current efficiency was about 66 % higher in the device with BCP electron transport layer. the blue phosphorescent OLED with BCP layer exhibited higher purity of color, resulting from a relatively weak electroluminescence intensity at 500 nm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.127-128
• /
• 2000

Organic light-emitting diodes(OLEDs) are constructed using multilayer organic thin films. The hole-transport layer is PVK and the emitting material is rubrene and $Alq_3$. The emitting layer is doped with rubrene partially. As the partially-doped layer migrate from the interface PVK/emitting layer, the emission peak of rubrene decrease and diminish. By comparing with the previous reports, we propose the zero-field hole injection barrier at ITO/PVK interface and hole-trapping effect of rubrene in host materials as predominant factor to determine the emission zone.

• Journal of information and communication convergence engineering
• /
• 제12권3호
• /
• pp.154-160
• /
• 2014

The address resolution protocol (ARP) provides dynamic mapping between two different forms of addresses: the 32-bit Internet protocol (IP) address of the network layer and the 48-bit medium access control (MAC) address of the data link layer. A host computer finds the MAC address of the default gateway or the other hosts on the same subnet by using ARP and can then send IP packets. However, ARP can be used for network attacks, which are one of the most prevalent types of network attacks today. In this study, a new ARP algorithm that can prevent IP spoofing attacks is proposed. The proposed ARP algorithm is a broadcast ARP reply and an ARP notification. The broadcast ARP reply was used for checking whether the ARP information was forged. The broadcast ARP notification was used for preventing a normal host's ARP table from being poisoned. The proposed algorithm is backward compatible with the current ARP protocol and dynamically prevents any ARP spoofing attacks. In this study, the proposed ARP algorithm was implemented on the Linux operating system; here, we present the test results with respect to the prevention of ARP spoofing attacks.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.57-60
• /
• 2002

In generally, the guest-emitter doped system has been reported to give a bright electroluminescence(EL). The purpose of using doped system is to improve for increasing lifetime and efficiency, and tuning multicolor light. This indicates an enhanced electron-hole recombination rate in emitting layer. The purpose of this study is to obtain the high performance EL devices for flat panel display with red emission. We fabricated EL devices using the guest-host system. where DCM derivatives were taken as a dopant. The devices are fabricated in multilayer system with various concentration of the dopant (red light emitting dye). We measured the I-V characteristics and EL spectra from these devices. and we compared with photoluminescence(PL) quantum yield among the DCM derivatives. The emission mechanism of devices is participated in energy transfer. The energy transfer from these hosts to DCM generates luminescence spectra that vary from yellow red to red, depending on DCM derivatives. Absorption and emission spectra of organic materials composing the devices depend on the emission materials doped with the DCM derivatives. We demonstrated that the high EL efficiency can be achieved by doping host material with DCM derivatives and molecular steric structures

• 한국시뮬레이션학회논문지
• /
• 제12권4호
• /
• pp.73-81
• /
• 2003

An Ad Hoc network is a dynamic multi-hop wireless network that is established by a group of mobile hosts on a shared wireless channel by virtue of their proximity to each other. Since wireless transmissions are locally broadcast in the region of the transmitting host, hosts that are in close proximity can hear each other and are said to be neighbors. The transitive closure of the neighborhood of all the hosts in the set of mobile hosts under consideration forms an Ad Hoc network. Thus, each host is potentially a router and it is possible to dynamically establish routes by chaining together a sequence of neighboring hosts from a source to a destination in the Ad Hoc network. In a network, various real-time services require the network to guarantee the Quality of Services provided to the receiver. End-to-end QoS can be provided most efficiently when each layer of the protocol stack translates the requirements of the application into layer classified requirements and satisfies them. In this study, a mechanism to guarantee the QoS in Ad Hoc networks with buffer nodes is proposed. They effectively prevent traffic congestion and yield better transmission rate. In this way QoS is enhanced.

• 한국정보과학회논문지:정보통신
• /
• 제31권2호
• /
• pp.158-170
• /
• 2004

Mobile IP는 무선 네트워크에서 단말의 이동성을 지원하기 위한 대표적인 IP 기반 프로토콜이다. 이 프로토콜은 단말의 이동 사실을 탐지하는데 소요되는 지연과 자신의 새로운 이동 위치를 홈 네트워크에 등록하는 지연 등 핸드오프 과정에서 두 가지 주요 지연요소를 가지고 있다. 본 논문은 IEEE 802.11 무선 LAN 표준에 따른 2 계층 핸드오프 처리과정을 분석하여 3 계층 핸드오프에 유용하게 적용할 수 있는 L2 트리거를 정의한다. 또한 L2 트리거와 네트워크 위상 정보를 이용하여 앵커 에이전트를 동적으로 구성하고, 다중 전송(Multiple-Casting)을 이용하여 패킷 분실을 방지하는 MCAA(Multiple-Casting using Anchor Agent) 기법을 제안한다. 제안하는 기법의 효율성을 분석하기 위해서 대표적인 마이크로 이동성 지원 기법인 Regional Registration 기법을 비교대상으로 핸드오프 지연과 패킷 분실 관점에서 분석 평가하였다.