• IE interfaces
• /
• v.23 no.3
• /
• pp.246-256
• /
• 2010

As wireless and mobile technologies have advanced significantly, lots of large sized healthcare organizations have implemented so called mobile hospital (m-Hospital) which provides a location independent and point of care (POC) clinical environment. Implementation of m-Hospital enhances quality of care because health professionals such as physicians and nurses can use hospital information systems at the very place where patients are located without any delay. This paper presents a real-time patient monitoring system based on wireless network technologies. A general framework for the patient monitoring process is introduced and the architecture and components of the proposed monitoring system is described. The system collects and analyzes biometric signals of in-patients who suffer from cancer. Specifically, it continuously monitors oxygen saturation of patients in bed and alarms health professionals instantly when an abnormal status of the patient is detected. The monitoring system has been used and clinically verified in a university hospital.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.8
• /
• pp.443-451
• /
• 2003

Many attempts have been made for the health and lives of patients at a remote site. but little attention has been given to emergency system using wireless or other intelligent networks. In this paper, shown is a remote emergency system which can be used in an ambulance. It possibly gives a great help to the patients who may lose their lives, in other words, gives pre-hospital cure to them being sent to the hospital. Doctors or specialists are able to give a quick help which may give a new life to patients. This system deal with very important patient's data-ECG, SpO$_2$, blood pressure, biomedical signal data etc. - as other emergency system. A good performance better than other system is many but shortly spoken as follows. First, this system is user friendly system activated in windows 2000 environment. Second, MPEG4 and ECG data sent to the other station for specilists can give a pre-hospital cure to patients in advance. Third, there exist effective algorithms to operate this system. Fourth, this system has been made with software mostly, so this system can be easily embedded in IBM compatible computer. In addition to this performance, for the better and reliable system, various tests were proceeded and recursively tested. Tests were made in EV-DO wireless network and Local Area Network. This mobile-fixed remote emergency system using wireless network like EV-DO network will give a great usage to needed area.

• Journal of information and communication convergence engineering
• /
• v.4 no.2
• /
• pp.67-70
• /
• 2006

A distributed healthcare monitoring system prototype for clinical and trauma patients was developed, using wireless sensor network node. The proposed system aimed to measure various vital physiological health parameters like ECG and body temperature of patients and elderly persons, and transfer his/her health status wirelessly in Ad-hoc network to remote base station which was connected to doctor's PDA/PC or to a hospital's main Server using wireless sensor node. The system also aims to save the cost of healthcare facility for patients and the operating power of the system because sensor network is deployed widely and the distance from sensor to base station was shorter than in general centralized system. The wireless data communication will follow IEEE 802.15.4 frequency communication with ad-hoc routing thus enabling every motes attached to patients, to form a wireless data network to send data to base-station, providing mobility and convenience to the users in home environment.

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.562-566
• /
• 2011

As telecommunication technologies in telemedicine services are developed, the expeditious development of wireless and mobile networks has stimulated wide applications of mobile electronic healthcare systems. However, security is an essential system requirement since many patients have privacy concerns when it comes to releasing their personal information over the open wireless channels. Due to the invisible feature of mobile signals, hackers have easier access to hospital networks than wired network systems. This may result in several security incidents unless security protocols are well prepared. In this paper, we analyzed authentication and authorization procedures for healthcare system architecture to apply secure M-health systems in the hospital environment. From the analyses, we estimate optimal requirements as a countermeasure to its vulnerabilities.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.821-822
• /
• 2006

Ubiquitous healthcare monitoring and measuring system based on wireless sensor network was implemented and tested. The system can measure the ECG and body temperature of patients or elderly persons and transfer the data wirelessly in ad-hoc network to remote base-station connected to doctor's PDA/PC or hospital server, using wireless sensor motes. The data obtained can be analyzed by doctors and care providers to monitor a health status of patient in real time environment. To prove the capabilities of the wireless sensor network platform for ubiquitous healthcare applications, the performance of our monitoring and measuring system was tested with positive results.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.40-47
• /
• 2013

To verify the condition of patients moving in the medical center like hospital needs to be consider the various wireless communication network protocols and network components. Wireless communication protocols such as the 802.11a, 802.11g, and direct sequence has their specific characteristics, and the various components such as the number of mobile nodes or the distance of transmission range could affects the performance of the network. Especially, the network topologies are considered the characteristic of the brain wave(EEG) since the condition of patient is detected from it. Therefore, in this paper, various wireless communication networks are designed and simulated with Opnet simulator, then evaluated the performance to verify the wireless network that transmits the patient's EEG data efficiently. Overall, the 802.11g had the best performance for the wireless network environment that transmits the EEG data. However, there were minor difference on the performance result depends on the components of the topologies.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1404-1414
• /
• 2016

Cross-layer design is a concept, which captures the dependencies and interactions and enables information sharing among layers in order to improve the network performance and security. There are two key challenges in wireless networks, lossy features of links and power assumption of network nodes. Cross-layer design of congestion control and power allocation in wireless lossy networks has been studied in the existing literature; however, there has been no contribution proposed in the literature that exploits the path diversity. In this paper, we are motivated to develop a cross-layer design of congestion control and power allocation, which takes into account lossy features of wireless links and transmission powers of network nodes and can be implemented in a distributed manner. Numerical simulation is conducted to illustrate the performance of our proposed algorithm and the comparison with current alternative approaches.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.482-485
• /
• 2007

Recent generation of wireless computing has focus on the integrating of exisitng technologies to enhance the mobile capabilities and developing a new approaches to meet the needs of the growing pool of applications. This paper describes an integrated IEEE802.15.4 wireless CDMA based healthcare system that interacts and received the data wirelessly from wireless medical devices of patient and forward to medical center by using the cellular network. Mobile application had been developed not only as the middle ware to handle the receive and transmit of medical data between wireless sensor network and cellular network but also provides the interface for monitoring and analyzing the health condition of patients continuously at cellular phone regardless of its physical location. This system thus enables the remote healthcare monitoring and supports medical data seamlessly roams between IEEE802.15.4 wireless network and CDMA network beyond and outside the hospital environment.

• Journal of information and communication convergence engineering
• /
• v.10 no.4
• /
• pp.337-342
• /
• 2012

The medical industries are integrated with information technology with mobile devices and wireless communication. The advent of mobile healthcare systems can benefit patients and hospitals, by not only providing better quality of patient care, but also by reducing administrative and medical costs for both patients and hospitals. Security issues present an interesting research topic in wireless and pervasive healthcare networks. As information technology is developed, many organizations such as government agencies, public institutions, and corporations have employed an information system to enhance the efficiency of their work processes. For the past few years, healthcare organizations throughout the world have been adopting health information systems (HIS) based on the wireless network infrastructure. As a part of the wireless network, a mobile agent has been employed at a large scale in hospitals due to its outstanding mobility. Several vulnerabilities and security requirements related to mobile devices should be considered in implementing mobile services in the hospital environment. Secure authentication and protocols with a mobile agent for applying ubiquitous sensor networks in a healthcare system environment is proposed and analyzed in this paper.

• Journal of Sensor Science and Technology
• /
• v.15 no.5
• /
• pp.362-370
• /
• 2006

The wireless sensor network (WSN) based ECG and body temperature measuring system for ubiquitous health-care were designed and developed. The system was composed of a wireless sensor network node, base station and server computer for the continuous monitoring of ECG signals and body temperatures of patients at home or hospital. ECG signal and body temperature data, important vital signals which are commonly used in clinical and trauma care, were displayed on a graphical user interface (GUI). The data transfer from sensor nodes on patients' body to server computer was accomplished through a base-station connected to a server computer using Zigbee compatible IEEE802.15.4 standard wireless communication. Real-time as well as historical, ECG data of elderly persons or patients, can also be retrieved and played back to assist the diagnosis. The ubiquitous health care system presented in this study can effectively reduce social medical expenses, which will be increased greatly in the coming aging society.