• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.93-101
• /
• 1998

The present study was conducted to investigate the structural changes in rat cornes. Sixty eyes from one-day-old uneyed rats, fourty eyes from 10-weeks-old adult rats were used. With the increase of age, the epithelial layer was thickened by the addition of new successive cellular layers. Then, the new-born rat's epithelial cells formed a pentagonal shape, and the quality of decidual cells showed a high electron-density, although the boundary between cells was distinctive. The newly produced cells showed a low electron-density so that there was the distinctive difference between light and darkness. In Bowman's layer, collagen fibrils demonstrate a regularly arranged structure along with the age. In stroma's layer, the density of keratocytes was decreased and thereby progressively flattened during the development. The collagenous layer of the adult rats was more distinctive than that of the new-born rats in a form of vertical and horizontal parallel alignment running vertically and horizontally. Descemet's membrane changed its structure significantly along with the age. It changed the shape from "banded-layer" to "non-banded layer" gradually. The thickness was also increased along with the age. Regardless of developmental stages, the endothelium is usually monolayer. During the developmental process, endothelial cells disappeared, so the density of endothelium was also decreased. The empty spaces were replaced by the expansion of adjacent cells.

• Tunnel and Underground Space
• /
• v.28 no.2
• /
• pp.170-185
• /
• 2018

The effect of fault on the stability of the closely-spaced twin tunnels located in fault zones was investigated by numerical analyses and scaled model tests on condition of varying widths, inclinations and material properties of fault. When obtaining the strength/stress ratios of pillar between twin tunnels, three different stresses were used which were measured at the middle point of pillar, calculated to whole average along the pillar section and measured at the left/right edges of pillar. Among them, the method by use of the left/right edges turned out to be the most conservative stability estimation regardless of the presence of fault and reflected the excavating procedures of tunnel in real time. It was also found that the strength/stress ratios of pillar were decreased as the widths and inclinations of fault were increased and as the material properties of fault were decreased on condition using the stresses measured at the left/right edges of pillar. As a result of scaled model tests, it was found that the model with fault showed less crack initiating pressure than the model without fault. As the width of fault was larger, tunnel stability was decreased. The fault had also a great influence on the failure behavior of tunnels, such as the model without fault showed failure cracks generated horizontally at the left/right edges of pillar and at the sidewalls of twin tunnels, whereas the model with fault showed failure cracks directionally generated at the center of pillar located in the fault zone.

• Journal of Technology Innovation
• /
• v.23 no.3
• /
• pp.169-199
• /
• 2015

Information and communication technologies (ICT) have been combined with products from other industries to provide new functionality, as recently shown in the cases of Internet of Things (IoT). Modularity assumes a crucial role in such technological convergence, and has impacts on the relationship between organizations as well as competition within an industry. Interface standards, which ensure the connectivity between modules, serve as a critical factor in the process by which modularity affects organization systems and industry structure. To understand the aforementioned phenomenon, we studied modularity and interface standards with a focus on the interaction between technology and organization systems and subsequent changes in industrial dynamics. This paper examines previous literature on modularity and interface standards in the aspects of product architecture, organization systems, and institutional factors. With this analytical framework, we conducted a comparative analysis of electronic and automotive industries to derive implications for standardization policy. This research has shown the significance of external open interface standards in shaping an industrial landscape where a variety of module producers horizontally compete. It also advises that policymakers take into account product characteristics, engagement of leading firms in an industry, and institutional factors such as WTO law in the design of standardization policy.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.4
• /
• pp.475-481
• /
• 1996

This study was carried out to acquire the basic information of root growth under different pot size, imposing different space limitation on rhizosphere. Different size of pots that had same surface area but different depth, 5cm(Iength)$\times$5cm(width)$\times$30, 15, 5cm(depth), were used during the seedling stage of tobacco plant. Space limitation on rhizosphere affected not only the aerial growth, stem height, leaf area and shoot dry weight, but also root growth and root architecture. Aerial growth was highly related to growth of underground part, so space limitation on rhizosphere decreased aerial growth. Limitation on pot volume by reducing pot depth induced new rooting on crown. Root number and relative multiplication rate were higher in small pot that had 5cm depth than large pot, but total root length and mean extension rate showed reverse patterns. Root numbers of 1st order and 2nd order were increased as pot depth was increased, but the root number of 3rd order was increased in small pot. Root system of seedling grown in large pot distributed more horizontally than that in small pot at 20 days after temporary planting (DAT), but the root architecture of seedling was reversed at 25 DAT.

• Economic and Environmental Geology
• /
• v.14 no.3
• /
• pp.111-122
• /
• 1981

This study is a model analysis for an effective application of the geophysical prospecting to the investigation of geological structures or useful resources, and the purpose of it is to research a property of the electrical resistivity prospecting, especially by using a Three-Point electrode array method. In using the Three-Point electrode array method, it is theoretically assumed to choose the infinite for a distance between the two current electrodes, however it is impossible in applying to the practical field prospecting. Therefore this study was conducted for determination and presentation of a minimum appropriate distance between the two current electrodes by making a study on prospecting effect in the variation of distance between both the electrodes. In case that the ratios of the distance between the two current electrodes to that between the two potential electrodes are respectively chosen for 40, 400, 5,000, the experimental data of this study showed that the minimum appropriate distance between the two current electrodes is forty times as much as that between two potential electrodes. In order to make clear a problem about prospecting depth which is essential to the data processing, it had been chosen equally to the distance between two potential electrodes. As a result of it, it was shown that the anomaly is appeared along the position of an assumed ore body. Consequently it was found out that the prospecting depth of the Three-Point electrode array method is the same as the distance between the two potential electrodes. From the model experiment on the sheeting ore body(or linear structure) of horizontal, dipping of $30^{\circ}$, $60^{\circ}$ and vertical on the basis of above experimental condition, it was found out that the position and dip of assumed ore body could be inferred from the aspects of the equiresistivity curve. In consequence of performing out the simultaneous Normal and Reversal electrode movement, it was shown that the electrode movement of the Reversal forms the anomaly more clearly than that of Normal when the sheeting ore body is situated obliquely, therefore it could be ascertained that the electrode movement have to be performed simultaneously in the manner of Normal and Reversal. It was also exhibited that the aspect of the equiresistivity curve forms symmetrically when an assumed ore body (or linear structure) is situated horizontally or vertically, that is, symmetrically, and moreover that the aspect of the equiresistivity curve forms unsymmetrically when an assumed ore body (or linear structure) is situated obliquely. On the basis of these experimental analysis it is thought that it can be inferred from the aspect of equiresistivity curve whether an assumed ore body is obliquely situated or not.

• Journal of Korean society of Dental Hygiene
• /
• v.3 no.1
• /
• pp.13-24
• /
• 2003

The researcher worked with a total of 158 high school girls visiting the scaling practice room at the department of dental hygiene in Jinju Health college from November 11, 2002 to December 4, 2002, having their teeth scaled, observing their teeth and interviewing them with the aid of questionnaires. The findings can be summarized as follows. 1. The survey on the understanding of dental health and the attitudes of the subjects shows the following results : "I have never learned how to brush teeth" (65.8%: 104 girls); "I brush my teeth twice a day" (57.0%: 90 girls) : "I brush my teeth for 2 minutes"(44.3%: 70 girls): "I brush my teeth vertically and horizontally" (53.2%: 84 girls): "( brush my teeth, gum and tongue" (462%: 73 girls): "I use one brush for two months" (40.5%: 64 girls); "I don't have any floss" (582%: 92 girls): "I have never had my teeth scaled" (84.2%: 133girls) : "Smoking is bad for the teeth" (77.8%: 123 girls): "Drinking is bad for the teeth" (48.7%: 77 girls): "I have ever visited dental clinics" (92.4%: 146 girls). 2. The study on part of the teeth most exposed to caries shows the following results : Mandibular right first molar(79.8%: 126 girls): Mandibular left first molar(77.5%: 124 girls), Mandibular left second molar(70.2%: 111 girls). Mandibular right second molar(65.7%: 104 girls). Maxillary left first molar(59.5%: 94 girls): Maxillary left second molar(59.5%: 94 girls): Maxillary right first molar(58.2%: 92 girls). Maxillary right second molar(50.7%: 80 girls) 3. The statistics on the subjects' caries show the following results: DMF rate: 943%: DMFT rate: 25.61%: DMFT index: 7.17 teeth : DT rate: 4651%: FT rate: 52.25%: MT rate: 124% 4. The survey on dental caries statistics, dental health, dental health behavior, and the subjects' attitudes shows the following results: The worse the subjects' dental health was(r=-327, p<.001), the more they visited dental clinics(r=.195, p<.05), the higher DMT rate, DMFT index were; The more the subjects visited dental clinics(r =.359, p<.001), the higher DT rate was; The worse the subjects teeth went(r=-.197, p<.05), the higher MT rate was. It is necessary that systematic and substantial dental health education for high school students should be carried out in regard to plaque control, fluoride application, diet control, pit & fissure sealant as a part of developing national health policies designed for the dental health of the teenagers.

• Journal of the Korean association of regional geographers
• /
• v.17 no.1
• /
• pp.1-16
• /
• 2011

Today, the name of Changjiang (Yangtze) Delta Region is used to designate an economic region which consists of sixteen cities including Shanghai City. The region has achieved the highest rate of economic growth in the world as well as in China since China its opened its toward the world market. The aim of this study is to examine the modern transition of spatial structure in the region after the opening (1978) and the membership of WTO (2000). In the examination, the study divides the spatial structure into three aspects: industrialization, urbanization and economic integration. The outcome of examination suggests that spatial division of industry, horizontally and vertically, has not reached a satisfactory level even if it is still in progress. The study proposes that the intervention of government in the market and company activity has hindered the spatial division of industry including service sector between the cities, and thus the economic integration. It further suggests that the specialization of urban function has not entered into the maturing stage, with the shortage of mid-size cities that would mediate spatial-economically between the large-size cities and the small-size cities in the urban hierarchy.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.239-247
• /
• 2013

Recently renewable energy such as offshore wind energy takes a higher interest due to the depletion of fossil fuel and the environmental pollution. This paper deals with multi-body dynamics (MBD) analysis technique for offshore wind turbine system considering aerodynamic loads and Thevenin equation used for determination of electric generator torque. Dynamic responses of 5MW offshore wind turbine system are evaluated via the MBD analysis, and the system is the horizontal axis wind turbine (HAWT) which generates electricity from the three blades horizontally installed at upwind direction. The aerodynamic loads acting on the blades are computed by AeroDyn code, which is capable of accommodating a generalized dynamic wake using blade element momentum (BEM) theory. In order that the characteristics of dynamic loads and torques on the main joint parts of offshore wind turbine system are simulated similarly such an actual system, flexible body modeling including the actual structural properties are applied for both blade and tower in the multi-body dynamics model.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.1
• /
• pp.54-62
• /
• 2018

In the 2000's, due to a change in hospital management strategy, the organizational structure shifted from a hierarchical system to a team system. While the hierarchical system is characterized by being activity centered, job title linked, and vertically managed, the team system is characterized by being competency centered, job title segregated, and horizontally managed. The job titles of medical technologist manager was surveyed three times in 1997, 2007, and 2017. It has been confirmed through staff members working at 24 hospitals in more than 500 beds in the metropolitan area. The results of job titles follow are as follow: "Team Leader; Part Leader" 14/24 (59%), "Chief Technologist; Area Head Technologist" 7/24 (29%), and "Chief" 3/24 (12%). The present authors propose an alternative name based on the team system to refine the three job titles currently used by medical technologists. First, the Chief Technologist is unclear if it refers to the Technologist General Manager or Technologist Manager. The Chief Technologist should be changed to "Team Leader". Second, given that Area Head Technologist or Section Chief are on the same position as Head Nurse, we suggest that Area Head Technologist or Section Chief should be changed to "Part Leader". Third, while the organization regulation is marked merely as Department of Laboratory Medicine according to the hierarchical system, it is marked as Laboratory Medicine Team according to the team system. Medical technologists come to have more belongingness, feeling of solidarity, and intimacy under the team system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.1
• /
• pp.33-41
• /
• 1996

In order to obtain the most favourable classification system for fishing gears, the problems in the existing systems were investigated and a new system in which the fishing method was adopted as the criterion of classification and the kinds of fishing gears were obtained by exchanging the word method into gear in the fishing methods classified newly for eliminating the problems was established. The new system to which the actual gears are arranged is as follows ; (1)Harvesting gear \circled1Plucking gears : Clamp, Tong, Wrench, etc. \circled2Sweeping gears : Push net, Coral sweep net, etc. \circled3Dredging gears : Hand dredge net, Boat dredge net, etc. (2)Sticking gears \circled1Shot sticking gears : Spear, Sharp plummet, Harpoon, etc. \circled2Pulled sticking gears : Gaff, Comb, Rake, Hook harrow, Jerking hook, etc. \circled3Left sticking gears : Rip - hook set line. (3)Angling gears \circled1Jerky angling gears (a)Single - jerky angling gears : Hand line, Pole line, etc. (b)Multiple - jerky angling gears : squid hook. \circled2Idly angling gears (a)Set angling gears : Set long line. (b)Drifted angling gears : Drift long line, Drift vertical line, etc. \circled3Dragged angling gears : Troll line. (4)Shelter gears : Eel tube, Webfoot - octopus pot, Octopus pot, etc. (5)Attracting gears : Fishing basket. (6)Cutoff gears : Wall, Screen net, Window net, etc. (7)Guiding gears \circled1Horizontally guiding gears : Triangular set net, Elliptic set net, Rectangular set net, Fish weir, etc. \circled2Vertically guiding gears : Pound net. \circled3Deeply guiding gears : Funnel net. (8)Receiving gears \circled1Jumping - fish receiving gears : Fish - receiving scoop net, Fish - receiving raft, etc. \circled2Drifting - fish receiving gears (a)Set drifting - fish receiving gears : Bamboo screen, Pillar stow net, Long stow net, etc. (b)Movable drifting - fish receiving gears : Stow net. (9)Bagging gears \circled1Drag - bagging gears (a)Bottom - drag bagging gears : Bottom otter trawl, Bottom beam trawl, Bottom pair trawl, etc. (b)Midwater - drag gagging gears : Midwater otter trawl, Midwater pair trawl, etc. (c)Surface - drag gagging gears : Anchovy drag net. \circled2Seine - bagging gears (a)Beach - seine bagging gears : Skimming scoop net, Beach seine, etc. (b)Boat - seine bagging gears : Boat seine, Danish seine, etc. \circled3Drive - bagging gears : Drive - in dustpan net, Inner drive - in net, etc. (10)Surrounding gears \circled1Incomplete surrounding gears : Lampara net, Ring net, etc. \circled2Complete surrounding gears : Purse seine, Round haul net, etc. (11)Covering gears \circled1Drop - type covering gears : Wooden cover, Lantern net, etc. \circled2Spread - type covering gears : Cast net. (12)Lifting gears \circled1Wait - lifting gears : Scoop net, Scrape net, etc. \circled2Gatherable lifting gears : Saury lift net, Anchovy lift net, etc. (13)Adherent gears \circled1Gilling gears (a)Set gilling gears : Bottom gill net, Floating gill net. (b)Drifted gilling gears : Drift gill net. (c)Encircled gilling gears : Encircled gill net. (d)Seine - gilling gears : Seining gill net. (e)Dragged gilling gears : Dragged gill net. \circled2Tangling gears (a)Set tangling gears : Double trammel net, Triple trammel net, etc. (b)Encircled tangling gears : Encircled tangle net. (c)Dragged tangling gears : Dragged tangle net. \circled3Restrainting gears (a)Drifted restrainting gears : Pocket net(Gen - type net). (b)Dragged restrainting gears : Dragged pocket net. (14)Sucking gears : Fish pumps.