• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 봄 학술발표회 논문집
• /
• pp.151-156
• /
• 1996

The differential equations governing free, out of plane vibrations of horizontally curved beams are derived and solved numerically to obtain the natural frequencies and the mode shapes. The Runge-Kutta method and Regula-Falsi method are used to integrate the differential equations and to determine the natural frequencies, respectively. In nu- merical examples, the hinged-clamped end constraint is considered and four lowest frequency parameters are reported as functions of four non-dimensional system parameters: (1) opening angle, (2) slenderness ratio, (3) shear parameter and (4) stiffness parameter. Also, typical mode shapes of displacements and stress resultants are shown.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.341-348
• /
• 2000

The differential equations governing the free vibrations of stepped horizontally circular curved beams with circular cross-section are derived and solved numerically. In numerical method, the Runge-Kutta and Determinant Search methods are used for computing the natural frequencies and mode shapes. Frequencies and mode shapes are reported as the functions of non-dimensional system parameters. The numerical method developed herein for computing frequencies and mode shapes are efficient and reliable.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.29-36
• /
• 2003

This paper deals with the free vibration analysis of horizontally circular mea beams with variable cross sectional width on elastic foundations. Taking into account the effects of rotatory inertia and shear deformation differential equations governing the free vibrations of such beams are derived, in which the Whlkler foundation model is considered as the elastic foundation. The variable width of beam is chosen as the linear equation. The differential equations are solved numerically to calculate natural frequencies. In numerical examples, the curved beam with the hinged-hinged, hinged-clamped, clamped-hinged and damped-clamped end constraints are considered The parametric studies are conducted and the lowest four frequency parameters are reported in figures as the non-dimensional forms.

• Steel and Composite Structures
• /
• 제11권1호
• /
• pp.21-38
• /
• 2011

This study examines the influence of curved, steel, I-girder bridge configuration on girder end reactions and cross frame member forces during seismic events. Simply-supported bridge finite element models were created and examined under seismic events mimicking what could be experienced in AASHTO Seismic Zone 2. Bridges were analyzed using practical ranges of: radius of curvature; girder and cross frame spacings; and lateral bracing configuration. Results from the study indicated that: (1) radius of curvature had the greatest influence on seismic response; (2) interior (lowest radius) girder reactions were heavily influenced by parameter variations and, in certain instances, uplift at their bearings could be a concern; (3) vertical excitation more heavily influenced bearing and cross frame seismic response; and (4) lateral bracing helped reduce seismic effects but using bracing along the entire span did not provide additional benefit over placing bracing only in bays adjacent to the supports.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.399-406
• /
• 2000

In this study, using the CRS consolidation tests on reconstituted marine clay, the characteristics of C$\sub$v/, k, e and $\varepsilon$, the anisotropic characteristics of specimen according to the rate of strain were estimated. Also, the validity of the Wissa et al.(1971) consolidation theory on CRS(Constant Rate of Strain) consolidation tests were reviewed. From that results, it was shown that the value of C$\sub$v/, k and u$\sub$b/ was increased as the rate of strain was increased. While the difference of the value( C$\sub$v/, k and u$\sub$b/) between vertically reconstituted specimen and horizontally reconstituted specimen became small as the rate of strain was increased. It is known that k is different due to the hydraulic gradient(i) during the CRS consolidation tests. The subject of this study is to distinguish steady state from transient state in CRS consolidation tests. Consequently, the difference of the value(C$\sub$v/ and k) is higher in case of vertically reconstituted specimen than horizontally reconstituted specimen.

• Journal of Korean Dental Science
• /
• 제14권1호
• /
• pp.40-45
• /
• 2021

During orthodontic treatment of impacted teeth, use of appropriate anchorage against the traction force is important. Tooth anchorage with multi-bracket appliances is commonly used but sometimes it causes unwanted movements of adjacent teeth. Skeletal anchorage devices are therefore considered to minimize such side effects. Still their survival rate and positioning are highly limited according to the bone density and the interradicular space. This case report presents a case of two impacted teeth, one of which is dilacerated and horizontally angulated. Using the microplate with short screws and a bendable neck, negative effects on adjacent teeth were minimized and impacted teeth were repositioned with good stability.

• 국제초고층학회논문집
• /
• 제11권4호
• /
• pp.331-346
• /
• 2022

Reproducing the horizontally homogeneous atmospheric boundary layer in computational wind engineering is essential for predicting the wind loads on structures. One of the important issues is to use fully developed inflow conditions, which will lead to the consistence problem between inflow condition and internal roughness. Thus, by analyzing the previous results of computational fluid dynamic modeling turbulent horizontally homogeneous atmospheric boundary layer, we modify the past hypotheses, detailly derive a new type of inflow condition for standard k-ε turbulence model. A group of remedial approaches including formulation for wall shear stress and fixing the values of turbulent kinetic energy and turbulent dissipation rate in first wall adjacent layer cells, are also derived to realize the consistence of inflow condition and internal roughness. By combing the approaches with four different sets of inflow conditions, the well-maintained atmospheric boundary layer flow verifies the feasibility and capability of the proposed inflow conditions and remedial approaches.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.61-62
• /
• 2011

In recent years, domestic construction companies have developed a 200MPa grade high-strength concrete and promoting the superiority of each technique. However, applying design and construction practices of developed high-strength concrete are weak. Most applications is limited to partial use and then the actual examples only used as a layer of high-rise building outrigger with casting some test on basement' vertical structures. In this study, developed materials for separation casting through joint research have been examined economy and others by field application and improving the workability.

• Structural Engineering and Mechanics
• /
• 제85권4호
• /
• pp.501-510
• /
• 2023

Horizontally polarized shear waves (SH) have numerous applications in various scientific, engineering, and medical fields. The study deals with an investigation of SH-waves in a thin microstructural plate. The plate has been mathematically modelled by employing size dependent consistent couple stress theory, which involves a length parameter, known as characteristic length. Characteristic length is assumed to be of the order of internal microstructures of the material. Dispersion relations have been calculated for the propagation of SH-waves using different set of boundary conditions. Group velocity of the SH-waves has been calculated by using an analytical approach. The mathematical results obtained in the problem are discussed in detail and the impacts of characteristic length parameter and thickness of plate are presented on phase velocity of SH-waves through graphical illustrations.

• 기술사
• /
• 제24권1호
• /
• pp.33-56
• /
• 1991