• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.1-14
• /
• 1981

A laboratory model test was carried out with a newly designed model to figure out the vibration characteristics of the vibratory tillage tool according to the method of forced vibration, i.e., horizontally and vertically forced vibrations. The results are summarized as follows: 1. The reduction ratios of the draft force of the vibratory blade were 14.2-42.6% for the case where the vibration was forced parallel to the travelling direction of the blade, and 15-54.5% for the vertically forced vibration. And it was thought that the method of vertically forced vibration was preferable to the reduction of the draft force. 2. The ratio of the draft force of a vibratory blade to that of a static one could be represented as a function of V/At. It was found to be possible to reduce the draft force by taking a lower value of (V/Af) and this meant that the effictiveness of tillage practice using the vibratory system would be limited. 3. The torque to the main rotating shaft to vibrate the model blade increased frequency and amplitude. This tendency varied according to the physical properties of tested soil. In case of horizontally forced vibration, the torque was 8~34% less than in case of vertically forced vibration. 4. With the increase of frequency, the total power requirement increased linearly, and also the portion of oscillating power requirement in the total power tended to increase. The magnitude of the total power requirement was 1.4-13 times greater than that of a static one for the case of horizontal vibration, and 1.5-15 times greater for the case of vertical vibration. It was thought that the horizontal vibration of the blade was preferable to the vertical vibration in view of the power requirement. 5. A linearity was found between the amplitude of moment oscillogram and magnitude of oscillating acceleration. Only positive values of moment occurred when the blade was forced to vibrate vertically, but negative values occurred in rarity in the case of amplitude A3 when the blade was forced to vibrate horizontally.

• Fisheries and Aquatic Sciences
• /
• v.9 no.2
• /
• pp.91-96
• /
• 2006

The movement range and diurnal behavior of 17 wild black rockfish (Sebastes schlegeli) were monitored within the marine ranching area of Tongyeong from 27 July to 7 November, 2005 using acoustic telemetry. Coded transmitters were surgically implanted into the abdomen of fish. Two of ten fish released in summer moved about 2 km away from the capture point for 1 day. The others stayed within a 500-m radius of the release point for 1 week after release. The seven fish released in autumn stayed within 500 m of the release point. Most fish were more active and had a greater range of horizontal diurnal movement at night than during the day. Additionally, the range of horizontal diurnal variation was greater in summer than in autumn. While fish released in summer were more vertically active at night than during the day, those released in autumn preferred to move vertically during the day.

• Imaging Science in Dentistry
• /
• v.36 no.3
• /
• pp.131-135
• /
• 2006

Purpose : To evaluate the true projection angles of film-side mandibular condyles in panoramic and transcranial radiographs. Materials and Methods : 52 panoramic and transcranial radiographs of 4 condyles from two human dry mandibles with gradual horizontal and vertical angle changes were taken. The results were compared with the standard panoramic and transcranial radiographs and the identical pairs were selected. Results and Conclusion : Panoramic radiography projected 10 degrees to the film-sided condyles both horizontally and vertically. Transcranial radiography projected 15 degrees to the film-sided condyles vertically. The medial and lateral poles were not forming the outline of condylar images in both projections when the horizontal angles of condyles were not sufficiently big enough.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.783-787
• /
• 2014

This paper presents an improved vertical alignment nematic liquid crystal mode characterized by the protrusions or slits of the top substrate and additional stripe type common electrodes with polarity switching of the bottom substrate to improve multi-domain vertically aligned (MVA) and patterned vertically aligned (PVA) nematic modes. MVA and PVA modes have disadvantages such as an LC disclination in the vicinity of the middle region of electrodes between the top and bottom protrusions in MVA mode or the top and bottom slits in PVA mode. Therefore, the stripe type common electrode generating a horizontal electric field and the protrusion or slit producing some pretilt of liquid crystals (LCs) were used to improve the LC disclination, which influences the transmittance and response speed. The simulation results showed that the proposed VA mode has higher transmittance than the MVA and PVA modes. As a result, the proposed VA mode can improve the response speed and transmittance remarkably, which makes it useful for upgrading the LCD display quality.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2581-2584
• /
• 2003

In this paper, we propose a self-localization algorithm using vertical line segments. Indoor environment is consist of horizontal and vertical line features such as doors, furniture, and so on. From the input image, vertical line edges are detected by an edge operator, Then, line segments are obtained by projecting edge image vertically and detecting local maximum from the projected histogram. From the relation of horizontal position of line segments and the location of the robot, nonlinear equations are come out Localization is done by solving the equations by using Newton's method. Experimental results show that the proposed algorithm using one camera is simple and applicable to indoor environment.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.111.2-111.2
• /
• 2011

While many astrophysical disks are vertically stratified and obey a polytropic equation of state, most studies on gravitational instability (GI) of flattened systems consider isothermal, razor-thin disks by taking vertical averages of disk properties. We investigate local GI of rotating pressure-confined polytropic disks with resolved vertical stratification by performing linear stability analysis. We find that the GI of vertically-stratified disks is in general a combination of conventional razor-thin Jeans modes and incompressible modes. The incompressible modes that dominate in the limit of the maximal disk compression require surface distortion and are an unstable version of terrestrial water waves. Disks with a steeper equation of state are found to be more Jeans unstable because they tend to have a smaller vertical scale height as well as a steeper temperature gradient corresponding to lower pressure support. GI depends more sensitively on the vertical temperature than density distribution. The density-weighted, harmonic mean, rather than the simple mean, of the adiabatic sound speed well describes the dispersion relation of horizontal modes, and thus is appropriate in the expression for Toomre Q stability parameter of razor-thin disks. We generalize Q into vertically-stratified disks, and discuss astrophysical application of our work.

• Geomechanics and Engineering
• /
• v.15 no.3
• /
• pp.861-868
• /
• 2018

Recent occurrences of earthquakes in Korea have increased the importance of considering how horizontal loads affect foundation structures as a result of wind and dynamic impact. However, to date, there are few studies on tunnelling-induced behaviour of ground and pile structures simultaneously subjected to horizontal and vertical loads. In this research, therefore, the behaviour of ground and single piles due to tunnelling were investigated through a laboratory model test. Three cases of horizontal loads were applied to the top of the pile. In addition, a numerical analysis was carried out to analyse and compare with the results from the laboratory model test.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.287-296
• /
• 1991

The purpose of this experiments is to compare the vertical and horizontal magnification, and the distortion of the radiographic image according to the types of panoramic machines. Total 70 radiographs, 10 radiographs out of 7 panoramic machines respectively, were taken from the dry skull with metal balls in the periapical areas of the central incisor, the canine, the second premolar, and the second molar in the maxilla and the mandible. And the author evaluated the vertical and horizontal magnification degrees, and the distortion degrees of radiographic images obtained from each panoramic machine. The results were as follows: There were no significant differences in the vertical and horizontal magnification degrees on the various portions of the jaws (p> 0.05). But there were higher magnification degrees in the Panoura 10C, Panograph Ⅱ, and Veraview than those in other panoramic machines. The lowest average magnification degree was 20.27% vertically, 20.94% horizontally using the Panoradix. The highest average magnification degree was 27.64% vertically, 28.48% horizontally using the Panograph Ⅱ. The lowest distortion was shown using the Panoura 10C in the maxilla, but there was not statistically significant difference between the panoramic machines in the mandible (p>0.05). There were no differences in the vertical and horizontal magnification degrees according to the types of the rotation centers.

• Structural Engineering and Mechanics
• /
• v.73 no.5
• /
• pp.487-500
• /
• 2020

Stiffeners can be utilised to enhance the strength of thin-walled wind turbine towers in engineering practise, thus, structural performance of wind turbine towers by means of different stiffening schemes should be compared to explore the optimal structural enhancement method. In this paper two alternative stiffening methods, employing horizontal or vertical stiffeners, for steel tubular wind turbine towers have been studied. In particular, two groups of three wind turbine towers of 50m, 150m and 250m in height, stiffened by horizontal rings and vertical strips respectively, were analysed by using FEM software of ABAQUS. For each height level tower, the mass of the stiffening rings is equal to that of vertical stiffeners each other. The maximum von Mises stresses and horizontal sways of these towers with vertical stiffeners is compared with the corresponding ring-stiffened towers. A linear buckling analysis is conducted to study the buckling modes and critical buckling loads of the three height levels of tower. The buckling modes and eigenvalues of the 50m, 150m and 250m vertically stiffened towers were also compared with those of the horizontally stiffened towers. The numbers and central angles of the vertical stiffeners are considered as design variables to study the effect of vertical stiffeners on the structural performance of wind turbine towers. Following an extensive parametric study, these strengthening techniques were compared with each other and it is obtained that the use of vertical stiffeners is a more efficient approach to enhance the stability and strength of intermediate and high towers than the use of horizontal rings.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.32-37
• /
• 2011

In car refinishing, the paint film characteristics of clear coat play an important role in appearance quality. Thus, Primarily in this research, the variance of brightness with the change of the thickness of paint film is investigated. Besides, as changing the thickness of paint film, the correlation between surface leveling(which is one of appearance characteristics) is investigated in this research. Throughout this investigation, we come to know that the increase of clear coat paint film thickness leads the improvement of appearance characteristics within specific range of thickness. Furthermore, the fact that too thick paint film does not increase the brightness or appearance characteristic any more is known. The optimum thickness of clear coat film for the best and appearance characteristics is derived from this research and more efficient way of determining optimum thickness of paint film is found. Particularly, haze value and waviness have more influence on vividness than brightness. Throughout all experiments, the appearance characteristics are much better at painted horizontally than vertically. These results are derived due to the facts that to obtain the same paint film thickness at painted vertically with painted horizontally is difficult and the way of vertical painting is different from horizontal painting. Therefore, the improvement of vertical painting and horizontal painting are required.