• 논리연구
• /
• 제16권3호
• /
• pp.347-380
• /
• 2013

나는 이 글에서 비트겐슈타인이 프레게의 의미 이론을 어떻게 비판했는지를 살펴보고자 한다. 프레게의 의미 이론은 뜻-지시체 이론으로 요약된다. 프레게는 모든 언어적 표현에 대해 뜻과 지시체를 구분한다. 특히 그는 문장도 뜻과 지시체를 지닌다고 간주한다. 그런데 이러한 구분은 소위 동일성 문장 문제로부터 제기된 것이다. "논고"의 "근본 사상"은 프레게의 뜻-지시체 이론에 대한 직접적인 비판의 단초이다. 즉 한 문장의 지시체는 진리치이며 진리치는 (프레게의 의미에서) "대상 자체"라는 생각에 대한 공격이다. 비트겐슈타인에 따르면 그러한 대상은 실재하는 것이 아니며, 그림 이론에 따르면 이름과 명제의 기능은 근원적으로 상이하다. 그런데 프레게의 입장에서는 이러한 비판이 불충분하다고 정당하게 응수할 수 있다. 요컨대 프레게의 "뜻", "지시체" 등은 모두 전문 용어인 것이다. 그리하여 비트겐슈타인의 결정적인 비판은 프레게의 이론 체계의 논리적 허점을 추궁하는 것으로 이루어진다. 프레게가 한 문장의 뜻과 지시체를 도입하는 또 다른 경로가 있다. 그는 "개념 표기법"에서는 판단선과 내용선에 대한 논의에서, 그리고 "함수와 개념" 이후에는 판 단선과 수평선에 대한 논의에서 한 문장의 뜻과 지시체를 다룬다. 비트겐슈타인은 바로 이러한 프레게의 규정에 의해서는 복합 문장의 뜻은 결코 해명될 수 없다고 비판한다.

• 한국학교수학회논문집
• /
• 제10권4호
• /
• pp.455-469
• /
• 2007

본 연구는 대학에서 연구 개발된 교재와 결과물 중에서 실생활을 기반으로 한 내용으로 교육 과정을 편성하여 교육함으로써 수학적 문제 해결력을 증진시키는데 도움을 주고자 한다. 학생들의 창의적 문제 해결력 신장과 자기 주도적 학습 능력을 배양시키기 위하여 가장 중요한 교육 환경이 학부모라 생각하고 학부모에게 사전 교육을 통하여 학생 스스로 자기 주변의 생활에서 문제를 찾고 흥미를 유발시켜 개방적 탐구 활동이 가능하도록 하는데 주안점을 두고 연구한 실험 연구라 할 수 있다. 지식을 전달하는 방법에 있어서도 생활 속에 포함된 문제를 스스로 찾고 분석하여 해결하는 학부모의 경험을 바탕으로 수학에 대한 긍정적인 태도와 활용 능력을 극대화시키고자 한다. 본 연구 진행은 크게 두 부분으로 나누어서 실행하였는데 학부모 교육과 학생 교육을 통하여 사고력, 논리력, 추리력을 배양하여 창의적인 문제해결능력을 기르고 학습 의욕을 진작시켜 생활 친화적인 수학지식을 습득시키고 학습 효과를 극대화시키고자 한다.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.86-93
• /
• 2009

The crack formation and the resistance of ITO film on PET substrate with a thickness of 20 nm were investigated as a function of strain. The onset strain for the increase of resistance increased with increasing strain rate, suggesting the crack initiation is dependent on the strain rate. Electrical resistance increased at the strain of 1.6% at the strain rates below $10^{-4}/sec$ while it increased at ${\sim}2%$ at the strain rates above $10^{-3}/sec$. The critical strain at which the cracks were formed is close to the proportional limit. Upon loading, the initial cracks perpendicular to the tensile axis were observed and propagated the whole sample width with increasing strain. The spacing between horizontal cracks is thought to be determined by the fracture strength and the interfacial strength between ITO and PET. The crack density increased with increasing strain. However, the effect of the strain rate on the crack density was less pronounced in ITO/PET with 20 nm ITO thickness than ITO/PET with 125 nm ITO thickness, the strength of ITO film is thought to increase as the thickness on ITO film decreases. The absence of cracks on ITO film at a strain as close as 1.5% can be attributed to the compressive residual stress of ITO film which was developed during cooling after the coating process. The higher critical strain for the onset of the resistance increase and the crack initiation of ITO/PET with a thinner ITO film (20 nm) can be linked with the higher strength of the thinner ITO film.

• 한국학교수학회논문집
• /
• 제8권4호
• /
• pp.481-494
• /
• 2005

본 연구는 대학에서 연구와 교육을 통하여 축적된 수학교육에 대한 노하우를 상대적으로 소외된 도서지역 고등학생들에게 제공함으로써 고급지식 및 이론의 확산에 힘쓰고자 한다. 연구는 삶의 지혜를 얻기 위한 수학, 실용능력을 배양하기 위한 실용수학, 자신의 품격을 높이기 위한 교양 수학으로 나누어 진행하며 수학 공부를 해야 하는 이유, 수학문제 해결력을 증진시키는 방안, 수학 기기를 이용한 수학학습, 암호이론 및 게임이론 소개, GSP를 이용한 도형학습, 수학과 스포츠, 수학과 예술 등을 포함하여 교재를 개발하고 개발된 교재를 통하여 대학원생을 훈련하고 수업계획안에 따라 수업을 하게 하는 도서지역 고등학생을 위한 흥미롭고 효과적인 수학지도 방안을 연구한다.

• 재활복지공학회논문지
• /
• 제7권2호
• /
• pp.101-107
• /
• 2013

본 연구는 이중 벨트 트레드밀을 이용하여 좌우 독립적 보행 시 횡축 체중부하 감소 유무에 따른 하지 근력불균형 개선효과에 대해 고찰하고자 한다. 피험자들은 하지의 좌우 근력차이가 20% 이상인 자 20명이며 체중부하 감소 유무에 따라 각각 10명씩 그룹으로 나누었다. 실험은 보행운동을 격일로 40분씩 주 3회, 총 4주간 진행되었으며 2주마다 등속성 관절토크 검사를 실시하여 고관절, 슬관절 및 족관절의 최대근력과 평균일률을 평가하였다. 실험 결과, 고관절에서 가장 큰 하지의 좌우 최대근력 불균형 개선효과(12.51%)를 보였으며 슬관절에서는 근반응성 개선효과(10.66%)가 크게 나타났다. 체중부하 감소방법은 하지의 근력불균형 개선효과에 긍정적인 결과를 기대할 수 있다고 사료된다.

• 대한토목학회논문집
• /
• 제31권1D호
• /
• pp.167-173
• /
• 2011

본 논문은 우리나라의 모든 국가기준점(삼각점)을 대상으로 종전의 동경측지계 성과로부터 세계측지계인 KGD2002성과를 산출하고 검증하기 위한 계산과정을 설명하고 있으며, 여기에는 국가기준점의 역사적 변천배경에 따라 1974년부터 2008년까지의 GPS관측데이터와 EDM관측데이터를 사용하고 있다. 통합망조정을 위하여 초대규모 통합 GPS망을 구성하고 다양한 단계의 데이터처리 절차를 거친 후 다점고정을 통해 12,000여점 국가기준점의 세계측지계 KGD2002 고시성과가 결정되었으며, 그 정확도는 수평방향에서 ${\pm}0.015m$(95%), 수직방향에서 ${\pm}0.030m$(95%) 수준이었다. 또한 조정성과의 검증을 위하여 GPS/EDM 결합망을 구성하여 검증계산한 결과와 KGD2002성과와 비교에서 그 좌표차(RMSE)가 수평과 수직방향에서 각각 ${\pm}0.0025m$, ${\pm}0.0008m$로서 나타나 고시성과의 계산이 타당함을 보여주고 있다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권3호
• /
• pp.255-261
• /
• 2007

Preface: Dental implant is important method that may solve the mastication, occlusion, esthetic, temporomandibular joint, and psychologic problem in oral and maxillofacial surgery. It is ideal that all of the implant are well positioned by adequate technique. By the way it‘s not always possible because of some anatomic, physiologic factor. In this case, If the implant can be moved to adequate position, it may be possible more esthetically and implanted patients more satisfied, but the majority of Implantists and orthodontists have thought that it is not possible. However, Implant, in fact, can be moved. and thus we can overcome the limit of implantation more. The aim of the present study was to evaluate the possibility of implant movement after corticotomy. Case report: Patient missed the upper right first molar. and implantation was done after completion of socket healing. We wait six months for osseointegration. Then, corticotomy was done under local anesthesia and close coil was used for orthodontic force. After traction during 3 weeks, we find the change of implant position at horizontal plane. we can not see the degenerative change on adjacent structure and tracted implant. there is a clinical mobility on upper right second premolar that used for anchorage but it subside spontaneously at the timing of prosthetic restoration without additional treatment. Discussion: As we could have some knowledge with this experiment, we report the case of implant movement after corticotomy and suggest a method about more esthetic implant treatment with a review of literature.

• 한국농촌건축학회논문집
• /
• 제18권3호
• /
• pp.1-8
• /
• 2016

Frank Lloyd Wright(1867-1959) had the confident concept that architecture should be at home in nature. His architecture was meant to bear an intimate relation to the earth and the sky, and should look as though it began there at the ground and contrasted with the sky. In handling all the details of house design elements, his efforts for being married to the ground was to conceive the void of the sky. This study is to research his thinking process and its development to the earth and the sky, and to analyze how such thought could reflect his houses. The mass of house are divided into three parts such as the foundation or base, body, and roof. These parts are respectively related to the earth and the sky. This study goes on regarding them as an analytical framework. The subjects of study are the Prairie houses in the early 20th century and the Usonian houses after 1930's. As results of this study, the earlier foundation as a platform appeared as a base and water table, and a strong baseline pressed the structures into the soil in the Prairie houses. The direct contact of wood and brick to ground were dominant details after Wiley house(1934). The base was almost invisible to the eye in the Usonian houses. Secondly, the pierlike shapes and delicate friezes of walls were anchored to the ground, and horizontal bands as trims or copings also got close to the earth. These characters had disappeared after the Allen house(1917), all components including exterior walls had been unified with the grid patterns in the Usonian houses. Thirdly, the overhanging cantilever roof had got to the earthbound by the reflection of shadow as well as their evident horizontal. He lowered the roof, lengthened and brought it closer to the ground. In this way, Frank Lloyd Wright intended his houses to be at home in nature. And also he tried to bind the houses to the earth and contrasted them with the sky. The houses would perform their highest function in relation to the earth and sky.

• 한국재료학회지
• /
• 제19권1호
• /
• pp.1-6
• /
• 2009

In this study, the stress-strain response and the cracking behaviors of ITO film on a PET substrate are investigated. The cracking behaviors of ITO thin films deposited on a thermoplastic semi-crystalline polymer developed for flexible display applications was investigated by means of tensile experiments equipped with an electrical measurement apparatus and an in-situ optical microscope. Electrical resistance increased gradually in the elastic-to-plastic transition region of the stress strain curves and cracks formed. Numerous cracks were found in this region, and the increase of the resistance was linked to the cracking of ITO thin films. Upon loading, the initial cracks perpendicular to the tensile axis were observed at about 1% of the total strain. They propagated to the entire sample width as the strain increased. The spacing between the horizontal cracks is thought to be determined by the fracture strength and the thickness of the ITO film as well as by the interfacial strength between the ITO and PET. The effect of the strain rate on the cracking behavior was also investigated. The crack density increased as the strain increased. The spacing between the horizontal cracks (perpendicular to the stress axis) increased as the strain rate decreased. The increase of the crack density as the strain rate decreased can be attributed to the higher fraction of the plastic strain to the total strain at a given total strain. The higher critical strain for the onset of the increase in the resistance and the crack initiation of the ITO/PET with a thinner ITO film (300 ohms/sq.) suggests a higher strength of the thinner ITO film.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.81-98
• /
• 2003

The purpose of this study is to closely examine kinematic characteristics by jump phase of Li Xiaopeng motion in horse vaulting and provide the training data. In doing so, as a result of analyzing kinematic variables through 3-dimensional cinematographic using the high-speed video camera to Li Xiaopeng motion first performed at the men's vault competition at the 14th Busan Asian Games, the following conclusion was obtained. 1. It was indicated that at the post-flight, the increase of flight time and height and twisting rotational velocity has a decisive effect on the increase of twist displacement. And Li Xiaopeng motion showed longer flight time and higher flight height than Ropez motion with the same twist displacement of entire movement. Also the rotational displacement of the trunk at peak of COG was much short of $360^{\circ}$(one rotation) but twist displacement showed $606^{\circ}$. Likewise, Li Xiaopeng motion was indicated to concentrate on twist movement in the early flight. 2. It was indicated that at the landing, Li Xiaopeng motion gets the hip to move back, the trunk to stand up and the horizontal velocity of COG to slow down. This is thought to be the performance of sufficient landing, resulting from large security of rotational displacement of airborne and twist displacement. 3. It was indicated that at the board contact, Li Xiaopeng motion made a rapid rotation uprighting the trunk to recover slowing velocity caused by jumping with the horse in the back, and has already twisted the trunk nearly close to $40^{\circ}$ at board contact. Under the premise that elasticity is generated without the change of the feet contacting the board, it will give an aid to the rotation and twist of pre-flight. Thus, in the round-oH phase, the tap of waist according to the fraction and extension of hip joint and arm push is thought to be very important. 4. It was indicated that at the pre-flight, Li Xiaopeng motion showed bigger movement than the techniques of precedented studies rushing to the horse, and overcomes the concern of relatively low power of jump through the rapid rotation of the trunk. Li Xiaopeng motion secured much twist distance, increased rotational distance with the trunk bent forward, resulting in the effect of rushing to the horse. 5. At horse contact, Li Xiaopeng motion makes a short-time contact, and maintains horse take-off angle close to vertical, contributing to the increase of post-flight time and height. This is thought to be resulted from rapid move toward movement direction along with the rotational velocity of trunk rapidly earned prior to horse contact, and little shave of rotation axis according to twist motion because of effective twist in the same direction.