Wedge-shaped fins are generally used to provide sufficient forces and moments to control and maneuver a supercavitating vehicle. There are four fins placed along the girth of the vehicle, near he tail: two of the fins are horizontal and the other two fins are vertical. In a fully developed supercavitating flow condition, a part of the fin is in a cavity pocket and the other is exposed to water. In this paper, experimental investigations of hydrodynamic characteristics of the wedge-shaped fin models are presented. Experiments were conducted at a cavitation tunnel of the Chungnam National University. We first closely observed the typical formation of wake cavitation and measured lift and drag forces acting on two different test models. Next, using a special device for generating natural and artificial supercavities, we investigated hydrodynamic forces at different cavitation number conditions. This work provides a basis for interpreting the cavity stability and hydrodynamic characteristics of the wedge-shaped control fin for a supercavitating vehicle.
An experimental study was carried out to study the solid-liquid mixture upward flow in a vertical and inclined annulus with rotating inner cylinder. Lift forces acting on a fluidized particle plays a central role in many importance applications, such as the removal of drill cuttings in horizontal drill holes, sand transport in fractured reservoirs, sediment transport and cleaning of particles from surfaces, etc. Field measurements have revealed that the pressure drop over a borehole during drilling of a slim oil well or a well with a long reach can depend significantly on the rotation speed of the drill pipe. An accurate prediction of the annular frictional pressure drop is therefore important for conditions where the annular clearance is small. Effect of annulus inclination and drill pipe rotation on the carrying capacity of drilling fluid, particle rising velocity, and pressure drop in the slim hole annulus have been measured for fully developed flows of water and of aqueous solutions.
The aerodynamic performance of long-span cable-stayed bridges is much dependent on its geometrical configuration and countermeasure strategies. In present study, the aerodynamic performance of three composite cable-stayed bridges with different tower configurations and passive aerodynamic countermeasure strategies is systematically investigated by conducting a series of wind tunnel tests in conjunction with theoretical analysis. The structural characteristics of three composite bridges were firstly introduced, and then their stationary aerodynamic performance and wind-vibration performance (i.e., flutter performance, VIV performance and buffeting responses) were analyzed, respectively. The results show that the bridge with three symmetric towers (i.e., Bridge I) has the lowest natural frequencies among the three bridges, while the bridge with two symmetric towers (i.e., Bridge II) has the highest natural frequencies. Furthermore, the Bridge II has better stationary aerodynamic performance compared to two other bridges due to its relatively large drag force and lift moment coefficients, and the improvement in stationary aerodynamic performance resulting from the application of different countermeasures is limited. In contrast, it demonstrates that the application of both downward vertical central stabilizers (UDVCS) and horizontal guide plates (HGP) could potentially significantly improve the flutter and vortex-induced vibration (VIV) performance of the bridge with two asymmetric towers (i.e., Bridge III), while the combination of vertical interquartile stabilizers (VIS) and airflow-depressing boards (ADB) has the capacity of improving the VIV performance of Bridge II.
본 연구에서는 수문의 설치방향에 따른 최적의 설치방향을 규명하기 위하여, 모형 제작에 의한 수문 진동실험을 수행하고, 진동특성이 연구되어진다. 47.5m 원형게이트가 아크릴을 사용하여 1:31 축척으로 제작되고, 납으로 질량이 보완된다. 먼저 모형을 검증하기 위하여 모형의 고유진동수가 측정되고, 원형 수문의 유한요소 해석 값으로 부터 환산된 고유진동수와 비교된다. 모형은 1.6m 폭을 갖는 콘크리트 수로에서 정방향과 역방향 설치에 따른 각각의 실험이 이루어 졌다. 각 방향 실험에서는 수문 개방고와 상하류 수위에 따른 여러 조건에서 수직진동이 측정되어 졌다. 실험결과를 바탕으로 정뱡향과 역방향 설치에 대한 진동현상을 서로 비교 분석하였다. 정방향 모형은 수문이 많이 열렸을 때 하단부의 수평트러스 부재를 치는 뒤돌아 치는 와류에 의하여 진동이 크게 발생하였고, 작은 개방고에서 suction force에 의한 진동이 발생하였다. 그러나 역방향 모형에서는 이러한 현상이 발생하지 않는다. 마지막으로 95m 수문의 진동실험결과와 본 47.m의 실험결과를 같이 비교하여 평가하였다. 실험결과 여러 실험 조건에서 진동이 작게 측정되는 역방향 배치 모형이 더 합리적인 것으로 분석되었다.
This study carried out a series of experiments involving impact tests (Drop Weight type & Charpy type with a standard specimen and newly designed I-type specimen), hardness tests, and fracture surface observations of French-made roll shell steel (F), abnormal roll shell steel (M), reheated roll shell steel (R), and S25C steel under heat treatment conditiAn experimental study was carried out to study the solid-liquid mixture upward hydraulic transport of solid particles in vertical and inclined annuli with a rotating inner cylinder. The lift forces acting on a fluidized particle play a central role in many important applications such as the removal of drill cuttings in horizontal drill holes, sand transport in fractured reservoirs, sediment transport, the cleaning of particles from surfaces, etc. In this study a clear acrylic pipe was used to observe the movement of solid particles. Annular velocities varied from 0.4 to 1.2 m/s. The effect of the annulus inclination and drill pipe rotation on the carrying capacity of a drilling fluid, particle rising velocity, and pressure drop in a slim hole annulus were measured for fully-developed flows of water and aqueous solutions of CMC (sodium carboxymethyl cellulose) and bentonite. The rotation of the inner cylinder was efficient at carrying particles to some degree. For a higher particle volume concentration, the hydraulic pressure loss of the mixture flow increased because of the friction between the wall and solids or between solids.
스포츠급 경항공기 개념 설계 단계에서 항공기의 정적 안정성 분석을 위해 1/5 축소모델로 풍동시험을 수행하였다. 제안된 경항공기의 동체 단독 및 동체에 주익, 수평꼬리날개, 수직꼬리날개 등을 조합한 6개 형상에 작용하는 공력을 내장형 밸런스를 이용하여 측정하고 정안정 미계수를 도출하여 기본 양항력 공력특성 및 각 요소가 세로 방향 가로 정안정 특성에 미치는 효과를 분석하였다. 풍동시험 결과로부터 특히, 수평꼬리날개와 수직꼬리날개 그리고 고익형태와 상반각을 갖는 주익 등이 각각 세로, 방향, 가로 정안정성에 미치는 기여정도를 정량적으로 파악하였으며, 본 시험결과는 항공기 각 형상 구성품 조합의 정안정 특성에 관한 유용한 실험자료로 활용될 수 있을 것이다.
본 연구에서는 편대비행하는 고속 항공기의 날개 끝 와류의 공력 간섭 효과를 연구하기 위해서 풍동실험기법이 적용되었다. 편대비행에서 앞선 항공기의 날개 끝에서 발생하는 와류가 뒤따르는 항공기의 공력 특성에 영향을 미칠 수 있다. 흐름의 간섭 효과는 앞선 항공기와 뒤따르는 항공기의 날개 끝 사이의 거리에 따라서 변화된다. 본 연구의 실험결과 앞선 항공기에서 발생되는 날개 끝 와류는 뒤따르는 항공기의 공력 및 모멘트 계수를 변화시킴을 확인하였다. 특히, 후방 항공기의 양력계수는 수직 및 수평 위치에 따라 y/b=-0.125, z/b=0.0에서 가장 많이 증가되거나 y/b=-0.5, z/b=0.38에서 가장 크게 감소됨을 확인하였으며, 두 항공기로부터 발생된 날개 끝 와류의 간섭 현상이 자세히 관찰되었다.
연동비닐하우스의 기초는 주로 수직하중을 고려하여 소형의 얕은 콘크리트 기초로 설계 시공된다. 그러나 최근 강풍과 같은 이상기후로 인하여 기초에 설계 강도 이상의 수평하중 및 인발하중이 작용하여 온실기초의 안전성 문제를 야기하고 있다. 비닐하우스 기초의 안전성을 합리적으로 평가하기 위해 지반-기초의 상호작용에 의해 발현되는 회전 및 인발강성을 평가하여야 하며 이는 상부 구조재의 안전성에도 영향을 미치는 요소가 된다. 본 연구에서는 내재해형 연동비닐하우스 규격 기초를 형상에 따라 분류하여 3개의 대표 기초 유형을 선정하고, 기초 유형별 수평하중 가력실험 및 이론 해석을 수행하였다. 실험 및 해석의 비교 분석 결과, 기초-지반 접촉면의 성질과 지반의 역학적 성질이 동일할 경우 기초는 지반과의 접촉면적비에 따라 회전저항성능에 차이를 보이는 것으로 나타났다.
본 연구는 체조 철봉종목의 국가대표선수 2명을 대상으로 고난도 공중 비행 기술인 콜만 동작의 완성도를 높이기 위한 기술훈련 프로그램을 개발하여 8주간 적용하고 향상도를 3차원 영상분석을 통해 제시함으로써 경기력 향상에 도움을 주고자 하였다. 훈련 프로그램은 휘돌기 손 놓기, twist, 봉잡기로 구성하여 실시하였으며, 그 결과 다음과 같은 결론을 얻었다. 동작이 처음 시작되는 크게 휘돌기의 물구나무 경과 시 신체를 지면과 수직에 가깝도록 치켜세운 다음 수직하강에 가깝게 신체를 다운시켜서 깊은 추기기 운동을 수행케 하고, 고관절과 견관절의 굴신 폭을 크게 하는 추기기보다는 우선적으로 동체 회전을 중시하면서 신체중심을 충분히 끌어 올리는 봉 이탈, 그리고 비행 시 신체 각 관절의 상대각을 작게 하도록 주문하여 연습케 하였다. 그 결과 철봉의 탄성을 크게 유발하구 신체의 후방 진행속도를 증가시켜서 휘돌기의 구심력을 증가시키면서 높은 위치에서 봉을 이탈하였으며, 비행 시 신체를 빠르게 지면과 수직이 되도록 세울 수 있게 되어 여유로운 공중회전과 비틀기 운동을 수행할 수 있었다. 또한 상승할 때 손 놓는 타이밍을 맞추는데 특별히 신경 쓰지 않더라도 비행방향의 조절을 용이하게 할 수 있어서 봉잡기 시 철봉과 적정한 거리를 유지함과 동시에 충분한 동체의 회전과 비틀기 거리를 확보할 수 있었다.
멸치초망어업에서는 반사갓에 AC 100V, 1kW 백열등 1개를 끼워서 집어등으로 사용하고 있다. 집어등은 저층에 있는 어군을 표층까지 부상시키고, 또한 표층에 유집된 어군을 자루그물로 유도하는 역할을 수행하고 있다. 본 연구에서는 멸치군을 유효하게 집어, 유도할 수 있는 집어 등을 구명하기 위한 기초연구로서 현재 초망어업에서 사용되고 있는 반사갓의 방사효율과 1kW 백열등의 파장별 방사특성을 계측하였으며, 그 결과를 요약하면 다음과 같다. 1. 반사갓은 백열등의 방사효율을 1.8배 정도 증가시켰으며, 전구를 중심으로 원형에 가깝게 빛을 수중으로 방사시켰고, 이는 수중광도계로 측정한 방사조도와도 잘 일치하였다. 2. 공기중에서 백열등의 방사조도는 994nm의 파장에서 최대치를 보인 반면 심도 0.5m, 1.0m 층에서 최대치를 보인 반면 심도 0.5m, 1.0m층에서는 모두 690nm의 파장에서 최대치를 보였다. 3. 집어등의 연직 하방에 있어서 심도(x)과 수중조도(y)와의 관계식은 다음과 같다. y=146.03e 상(-0.37x) 4. 1kW 백열등의 빛은 정횡방향보다 연직방향쪽으로 많이 투과되었으며, 집어등 직하에서의 빛은 심도 20m이심에는 도달하지 않는다고 추정된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.