• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.3
• /
• pp.99-111
• /
• 2017

The purpose of this study is to provide a design and operation technical guideline for meeting the appropriate design criteria to bio-gasification facilities treating organic wastes. Based on the results obtained during the field surveys, the overall design and operation guidelines for bio-gasification facilities, monitoring items, cycle and commissioning period were presented. According to the flow of anaerobic digestion process, Various design factors for bio-gasification facilities were proposed in this study. When designing the initial anaerobic digestion capacity, 10 ~ 30% of the treatment capacity was applied considering the discharge characteristics by the incoming organic wastes. At the import storage hopper process, limit concentration of transporting organic wastes was limited to TS 10 % or less, and limit concentration of inhibiting factor was suggested in operation of anaerobic digester. In addition, organic loading rate (OLR) was shown as $1.5{\sim}4.0kgVS_{in}/(m^3{\cdot}day)$ for the combined bio-gasification facilities of animal manure and food wastes. Desulfurization and dehumidification methods of biogas from anaerobic digestor and proper periods of liquifization tank were suggested in design guideline. It is recommended that the operating parameters of the biogasification facilities to be maintained at pH (acid fermentation tank 4.5~6.5, methane fermentation tank 6.0~8.0), temperature variation range within $2^{\circ}C$, management of volatile fatty acid and ammonia concentration less than 3,000 mg/L, respectively.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.159-167
• /
• 1997

To cope with the mass-production and supply of plug seedling, the supply of transplanters is necessary. In the study, a transplanting test was carried out to find the optimum working condition in the mechanizd transplantation and to acquire the basic data for the improvement of transplanters by the research and analysis of working capacity of the local manual transplanters. The size of hopper affected transplanting stand and rate. Re-irrigation was required for the transplanted seedlings because they wilt 1 day after the transplanting if soil compaction is incomplete. Consequently, back-forth-left-right compaction method was good for soil covering and compaction. It may be thought to increase the amount of irrigation water at the time of transplanting by double-irrigation mechanism, but it needs to increase the larger water tank which makes the operation uneasy. So, assuming the working model by 1 or 2 operators with the machine size as small as possible, it seemed that eliminating of automatic irrigation method was desirable in view of efficiency. Though semiautomatic transplanter needs some structural improvements, it seemed still suitable for transplanting of plug seedlings such as 45-day red pepper seedlings in 128-hole tray and 25-day Chinese cabbage seedling in 128-hole tray. If traveling speed of the transplanter is limited to less than 14 m/min, with the transplanting depth of 2~3cm and transplanting space of 30cm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.983-989
• /
• 2013

The current research reviewed the design conditions that would maximize the efficiency of the hybrid collector that combines in one unit "cyclone-inertial impaction-bag filter". The computational analysis for the shape of cyclone entry predicts that a design that installs the guide vane at the entry of the tangential type cyclone brings a high-rpm and powerful vortex, very effective in promoting the deflection of coarse particles from the streamline at the cyclone. As the lower part of the cyclone is venturi-shaped, however, a strong flow downward of 4 to 5 m/sec persists through the lower part of the hopper, revealing the likely reentrainment of collected dust. And the removal of the venturi at the lower part of the cyclone would solve the problem of the reentrainment of collected dust. The acceleration of the flow velocity through the adjustment of the gap of the collision baffle would increase the effect of collision, but as the interference with the dust separation is expected, the original design should be kept for the baffle.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.669-678
• /
• 1994

The BOD removal characteristics of submerged biofilters filled with three kinds of filter media respectively were experimentally examined with constant temperature, pH value and variable BOD loading and recirculation ratio. Obtained results are as follows; 1. The BOD removal ratio decreases with the increasing $BOD_5$ volumetric loading rate, and the loading rate for the BOD removal over 90% is lower thean $1.6kg{\cdot}BOD_5/m^3{\cdot}d$ for the plastic media of Netring and cubic wire meshes. This is a much large value than $0.3{\sim}0.8kg{\cdot}BOD_5/m^3{\cdot}d$ for conventional activated sludge process. The required submerged biofilter volume is found to be much samller than that of conventional activated sludge process. 2. The decreasing order of BOD removal is Netring (random plastic media), cubic wire meshes (plastic module), and then gravel (stone media). This is mainly due to the media characteristics such as void ratio, specific surface area and media shapes. 3. The $BOD_5$ removal rate increases with the recircuration ration, but the rate of increases becomes samaller as the recirculation ratio increases over 20. When $BOD_5$ loading is $1.8kg{\cdot}BOD_5/m^3{\cdot}d$, the required recirculation rationto obtain 90% $BOD_5$ removal is about 20 for Netring and it was about 30 for cubic wire meshes. 4. Reynold's Number increases with recirculation ratio, and the Reynold's Numbers corresponding to the recircuration ratio of 10~50 are less than 52, showing laminar up flows in the filter. The settled and effluent sludges increase with increase of Reynol's Number, and there are the definite Reynold's Numbers at which the settling sludge concentrations become nearly constant respectively in each filters. 5. In this submerged biofilter system, small volume of sludge hopper can be substituted for a separated settling tank.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.4
• /
• pp.354-361
• /
• 2016

While the amounts of oil spill caused by the VLCC Hebei Spirit indicated 2.5 times more than that of the VLCC Sea Prince, the economic, environmental, and social damages derived from the Hebei Spirit spill were estimated to be about 30 times greater than those from the Sea Prince incident. This study consolidates the appropriate justification for building a multi-purpose large oil spill response vessel to allow swift and efficient handling of catastrophic marine pollution events through an analysis of technical and economic feasibility of such a project. The result of the technical feasibility analysis illustrates that a hopper dredge and oil spill response vessel with a capacity of 4,000 tons should be more appropriate. The result of the economic feasibility analysis indicates that under the most conservative estimates the project appears to be slightly impractical, with a benefit/cost ratio of 0.82, in which self-help efforts, however, can facilitate the project. And medium to optimistic estimates present benefit/cost ratios are estimated to be 2.72 and 5.82 respectively, representing apparent economic feasibility.

• Korean journal of applied entomology
• /
• v.58 no.4
• /
• pp.347-354
• /
• 2019

Temperature-dependent traits of Laodelphax striatellus, rice stripe virus vector, were investigated at 10 constant temperatures (12.5, 15.0, 17.5, 20.0, 22.5, 25.0, 27.5, 30.0, 32.5, and 35.0 ± 1℃) under a fixed photoperiod (14/10-hr light/dark cycle). Unit functions for the oviposition model were estimated and implemented into a population dynamics model using DYMEX. The longevity of L. striatellus adults decreased with increasing temperature (56.0 days at 15.0℃ and 17.7 days at 35.0℃). The highest total fecundity (515.9 eggs/female) was observed at 22.5℃, while the lowest (18.6 eggs/female) was observed at 35.0℃. Adult developmental rates, temperature-dependent fecundity, age-specific mortality rates, and age-specific cumulative oviposition rates were estimated. All unit equations described adult performances of L. striatellus accurately (r² =0.94~0.97). After inoculating adults, the constructed model was tested under pot and field conditions using the rice-plant hopper system. The model output and observed data were similar up to 30 days after inoculation; however, there were large discrepancies between observed and estimated population density after 30 days, especially for 1^st and 2^nd instar nymph densities. Model estimates were one or two nymphal stages faster than was observed. Further refinement of the model created in this study could provide realistic forecasting of this important rice pest.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.241-250
• /
• 2009

This study was conducted to develop an prototype automatic feeder (AF) for growing-finishing pigs. The main components of AF were a feed storage hopper, a feeding motor, a feed agitator, a control box and a programmable IC, which were controlled by a personal computer. The powder type feed transfer rate of AF was average $9.83{\pm}0.4\;g\;s^{-1}$. In feeding test, growing pigs (Landrace) of about 43 kg live weight were used in the study, and was fed over a 6 weeks in pens with solid concrete floors. For feeding trials with AF, the operation time of the feeding motor was set to 2, 3, 4, 5, and 6 seconds per feeding. Pigs frequently used AF from 05:00 to 11:00 and from 11:00 to 17:00 without relationship to the operation time of the feeding motor. The AF operation time of the feeding motor to minimize feed loss was between 2 and 4 seconds. Pigs fed with AF had same or slightly higher average daily gam (0.8~0.9 kg) than that with a commercial feeder, and average daily feed intake (2.76~2.93 kg) and feed conversion ratio (3.10~3.66) of pigs fed with AF were same or lower than those with the commercial feeder except the operation time of the feeding motor set to 6 seconds. As a result, AF would help to use and improve the productivity of growing-finishing pigs.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.51-51
• /
• 2010

Recently just as in the automobile industry, shipbuilders also try to reduce material consumption and weight in order to keep operating costs as low as possible and improve the speed of production. Naturally industry is ever searching for welding techniques offering higher power, higher productivity and a better quality. Therefore it is important to have a details research based on the various welding process applied to steel and other materials, and to have the ability both to counsel interested companies and to evaluate the feasibility of implementation of this process. Submerged-arc welding (SAW) process is usually used about 20% of shipbuilding. Similar to gas metal arc welding(GMAW), SAW involves formation of an arc between a continuously-fed bare wire electrode and the work-piece. The process uses a flux to generate protective gases and slag, and to add alloying elements to the weld pool and a shielding gas is not required. Prior to welding, a thin layer of flux powder is placed on the work-piece surface. The arc moves along the joint line and as it does so, excess flux is recycled via a hopper. Remaining fused slag layers can be easily removed after welding. As the arc is completely covered by the flux layer, heat loss is extremely low. This produces a thermal efficiency as high as 60% (compared with 25% for manual metal arc). SAW process offers many advantages compared to conventional CO2 welding process. The main advantages of SAW are higher welding speed, facility of workers, less deformation and better than bead shape & strength of welded joint because there is no visible arc light, welding is spatter-free, fully-mechanized or automatic process, high travel speed, and depth of penetration and chemical composition of the deposited weld metal. However it is difficult to application of thin plate according to high heat input. So this paper has been focused on application of the field according to SAW process for thin plate in ship-structures. For this purpose, It has been decided to optimized welding condition by experiments, relationship between welding parameters and bead shapes, mechanical test such as tensile and bending. Also finite element(FE) based numerical comparison of thermal history and welding residual stress in A-grade 3.2 thickness steel of SAW been made in this study. From the result of this study, It makes substantial saving of time and manufacturing cost and raises the quality of product.

• The Korean Journal of Pesticide Science
• /
• v.3 no.1
• /
• pp.20-28
• /
• 1999

Chloronicotinyl derivatives were synthesized by substitution of amino in 3-pyridylmethylamine with phosphite groups and their insecticidal and fungicidal activities were determined. At 500 ppm, compound 4 with methyl and butyl group in phosphonate and compound 5, 6, 7, and 8 with two butyl, 2,2,2-trifluorotehtyl, 2-ethylhexyl, phenyl, respectively, in phosphonate showed 90% insecticidal activities against brown plant-hopper (Nilaparvate lugens). These compounds showed, however, poor insecticidal activities against diamond-back moth (Plutella xylostella) and two-spotted spider mite (Tetranychus urticae) (<65%), suggesting that insecticidal activity of chloronicotinyl derivatives containing phosphorus moieties are species-dependent. Newly synthesized chloronicotinyl derivatives with halogen and/or heterocycle (compound $10{\sim}21$) did not show insecticidal activities. We also determined fungicidal activity of the synthesized chloronicotinyl derivatives against rice sheath blight (Pyricularia grisea), cucumber gray mold (Bortytis cinerea), tomato late blight (Phytophthora infestans), wheat leaf rust (Puccinia recondita), and barley powdery mildew (Erysiphe graminis). Compound 10 with butyl and 4-nitrophenyl in phosphonate at 10 ppm showed 85% fungicidal activity against rice blast, suggesting that chloronicotinyl derivatives containing phosphorus moieties could be developed as a fungicidal agent of a novel chemical structure.

• Korean Journal of Ecology and Environment
• /
• v.47 no.3
• /
• pp.214-218
• /
• 2014

We introduce a technical equipment of GATe (Green (algae)-tide) water combine developed by K-water. The GATe water combine consists of five modules: main body and buoyant, transfer hopper, screen conveyer, sludge remover, and separator of algae and waste. Also a sprinkler, as the pre-treatment step if necessary, is equipped to the device to spread out environmental-friendly algaecide under the circumstance that the level of algal bloom does not reach to the scum-forming condition. The overall module system of this device is very simple. Based on the field test, the device covers surface area of ca. $500,000m^2day^{-1}$ during the period from May to July, and treats water volume as much as $500,000m^3day^{-1}$ in spite of some variation depending on the water quality condition. The removal efficiency of the device appeared to be over 90%. In addition, the operating duration of the device was able to expand to cover the period between March and November. We expect this new technology can be used to solve algal bloom problems in drinking water resource and public water area.