• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.839-844
• /
• 2002

This letter focuses on the liquid crystal alignment characteristics according to the properties of hydrogenated amorphous carbon(a-C:H) thin film deposited by RPECVD(Remote Plasma Enhanced Chemical Vapor Deposition) method using $C_2H_2$ and He gases. The properties of the deposited thin films were controlled by the ion beam irradiation time and ion beam energy. The results show that not ion beam energy but ion beam irradiation time plays an important role in the properties of a-G:H thin films. As the ion beam irradiation time increases, not only the sp2 concentration in a-G:H thin films but also liquid crystal pretilt angle was varied.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.346-349
• /
• 2001

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of diamond like carbon (DLC) thin film. A high pretilt angle of about $4^{\circ}$ was measured by ion beam(IB) exposure on the DLC thin film surface. A good LC alignment was observed by the IB alignment method on the DLC thin film surface at annealing temperature of $200^{\circ}C$, and the alignment defect of the NLC was observed above annealing temperature of $220^{\circ}C$. Consequently, the high NLC pretilt angle and the good thermal stability of LC alignment can be achieved by the IB alignment method on the DLC thin film surface.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2006.10a
• /
• pp.116-117
• /
• 2006

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.150-150
• /
• 2011

Electron-neutral collision frequency is one of the important parameters in the plasma physics. Recently, It is employed to monitor the plasma processing in industrial plasma engineering [1]. Using the wave-cutoff probe with network analyzer, the plasma impedance was measured in inductively coupled argon plasma and analyzed to determine the resonance frequency. The electron-neutral collision frequency is directly calculated from the resonance frequency. The calculated electron-neutral collision frequency is good agree with reference which is calculated by measured EEDF using single langmuir probe (SLP).

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.242.2-242.1
• /
• 2003

The purpose of the present study was to evaluate the bioequivalence of two Erdosteine capsules, $Erdos^{TM}$(Dae Woong Pharmaceutical Co., Ltd.) and $Ersteine^{TM}$(Dae Won Pharmaceutical Co., Ltd.), according to the guidelines of Korea Food and Drug Administration (KFDA). Twenty-four normal male volunteers,23.88 ${\pm}$2.89 year in age and 68.50 ${\pm}$ 7.71 kg in body weight, were divided into two groups and radkomied 2${\times}$2 cross-over study was empolyed. Ater three capsules containing 300 mg of erdosteine per capsule were orally administered, blood was taken at predetermined time intervals and concentrations of erdostene I in plasma were determined using HPLC. (omitted)

• Communications of Mathematical Education
• /
• v.25 no.1
• /
• pp.1-19
• /
• 2011

HPM(History and Pedagogy of Mathematics) become an important issue to us now. Study on old Korean mathematics books were made recently. We study mathematics books in Kyujanggak in this article. Horng Wann-Sheng 洪萬生, an math. historian and a member of editorial board of Historia Mathematica, visited Kyujanggak, the royal library of Joseon Dynasty. After his visit, he published a paper, "The first visit to mathematics books in Kyujanggak 奎章閣收藏算書初訪"(2008 Kyujanggak 32, p. 283-293). In his paper, he also raised several research problems on the history of Korean mathematics. In this paper, we analyze his paper "The first visit to mathematics books in Kyujanggak" and give some answers to those raised problems on Korean mathematics. Also we correct some misunderstanding of Horng on some facts. Especially, we make it clear that the author of SinJungSanSul(New Arithmetics 新訂算術) was not Lee Sang-Seol(李相卨), whom Horng considered as the author, but Lee Gyo-Seung(李敎承) through the correct translation of its preface and an article about its copyright lawsuit. And we added some pathways how Chinese mathematics books were imported by Joseon. We introduce the case of Hong Dae-Yong(洪大容) in detail.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.5
• /
• pp.323-331
• /
• 2007

Barren ground is an abnormal phenomenon in coastal ecosystems where seaweeds are destroyed and largely replaced by coralline algae containing calcium carbonate components. To restore the seaweed forest, we attempted reconstruction in an area of Samcheok, Korea, where barrenness is extensive. We developed two methods of seaforest construction underwater longline and seed transplantation for the brown seaweed Laminaria japonica, a fast-growing edible seaweed. The blade length of L. japonica attached to an underwater long line was $93.9{\pm}38.2cm$ and blade weight $7.6{\pm}2.1g$ in February 2004. Seaweed size declined after August 2004. A Similar pattern was observed using the transplantation method with maxima of $179.3{\pm}40.3cm\;and\;14.9{\pm}3.2g$ for blade length and weight, respectively in July 2004. The transplanted seaweeds matured in October as did a wild population. These results indicate that transplanted seaweed acclimate to new environments.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.1 s.151
• /
• pp.48-54
• /
• 2007

Higher productivity and less cost during the manufacturing process of ships are required to maintain international competitiveness of modern shipbuilding industries. The integrated hull/ outfitting/ painting scheduling(IHOP) process is a final point, where logistics are finally being integrated and upcoming schedules are made. Therefore, more profits are expected from IHOP by effective management. In this thesis, IHOP is proposed in order to solve how to choose block erection date with IHOP scheduling logic. The result of IHOP scheduling is highly advised to utilize fabrication, outfitting shops. A standardized operation and load of resource will eventually be applied in long-term time span point of view for this will make it easy to enable capacity planning and workforce planning. It is also expected to eliminate inefficiency in overtime work and efficiently utilize manpower in short-term.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1997.07a
• /
• pp.34-34
• /
• 1997

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.274-278
• /
• 2002

The purpose of this study was to characterize the reaction of Cu surface with Cu slurry and CMP performance as a function of additives in CMP slurry. The polish rate of Cu was dependent on the kind of organic acids added in slurry. It was considered that polish rate of Cu was dependent on the concentration of carboxylates and mean particle size. When the etchant and oxidant were added in slurry, the highest removal rate and lower etch rate were measured at neutral pH. The addition of etchant, oxidant and pH adjustor played key roles of CMP ability in slurry. As the pH increased, polish rate of Cu was increased by the enhanced the mechanical effects due to effective dispersion of slurry particles. Alumina abrasives was more desirable for 1st step slurry because of high removal rate of Cu and high selectivity ratio among TaN and Cu.