• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1109-1114
• /
• 2008

To investigate the effect of sample size on coefficient of consolidation of non-homogeneous soil, the result of a large size consolidation test using a huge undisturbed sample with $1200mm(D){\times}2000mm(H)$ in dimension is compared with that of oedometer test using undisturbed small sample. In addition, test results are compared with those of same test using remold sample. Experimental results show that, due to the lump of sand/silt was mixed in sample, the coefficient of consolidation of undisturbed samples have a difference for each tests. Whereas, the difference of coefficient of consolidation between remolded large and small samples is not found. Because sample size affects the test results, sample must be carefully selected for non-homogeneous soil.

• Kyungpook Mathematical Journal
• /
• 제50권2호
• /
• pp.307-314
• /
• 2010

By introducing a homogeneous kernel of 0-degree with an independent parameter and estimating the weight coefficient, a bilateral form of the Hilbert-type series inequality with a best constant factor is established.

• 대한수학회논문집
• /
• 제35권3호
• /
• pp.789-797
• /
• 2020

By considering a certain univalent function in the open unit disk 𝕌, that maps 𝕌 onto a strip domain, we introduce a new class of analytic and close-to-convex functions by means of a certain non-homogeneous Cauchy-Euler-type differential equation. We determine the coefficient bounds for functions in this new class. Relevant connections of some of the results obtained with those in earlier works are also provided.

• Geomechanics and Engineering
• /
• 제10권1호
• /
• pp.21-35
• /
• 2016

Employing non-associated flow rule and Power-Law failure criterion, the failure mechanisms of tunnel roof in homogeneous and layered soils are studied in present analysis. From the viewpoint of energy, limit analysis upper bound theorem and variation principle are introduced to study the influence of dilatancy on the collapse mechanism of rectangular tunnel considering effects of supporting force and seepage force. Through calculation, the collapsing curve expressions of rectangular tunnel which are excavated in homogeneous soil and layered soils respectively are derived. The accuracy of this work is verified by comparing with the existing research results. The collapsing surface shapes with different dilatancy coefficients are draw out and the influence of dilatancy coefficient on possible collapsing range is analyzed. The results show that, in homogeneous soil, the potential collapsing range decreases with the decrease of the dilatancy coefficient. In layered soils, the total height and the width on the layered position of possible collapsing block increase and the width of the falling block on tunnel roof decrease when only the upper soil's dilatancy coefficient decrease. When only the lower soil's dilatancy coefficient decrease or both layers' dilatancy coefficients decrease, the range of the potential collapsing block reduces.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.135-141
• /
• 2015

PURPOSES: This study has been conducted to determine a homogeneous segment and integration to improve the efficiency of short-term traffic count. We have also attempted to reduce the traffic monitoring budget. METHODS: Based on the statistical approach, a homogeneous segment in the same road section is determined. Statistical analysis using t-test, mean difference, and correlation coefficient are carried out for 10-year-long (2004-2013) short-term count traffic data and the MAPE of fresh data (2014) are evaluated. The correlation coefficient represents a trend in traffic count, while the mean difference and t-score represent an average traffic count. RESULTS : The statistical analysis suggests that the number of target segments varies with the criteria. The correlation coefficient of more than 30% of the adjacent segment is higher than 0.8. A mean difference of 36.2% and t-score of 19.5% for adjacent segments are below 20% and 2.8, respectively. According to the effectiveness analysis, the integration criteria of the mean difference have a higher effect as compared to the t-score criteria. Thus, the mean difference represents a traffic volume similarity. CONCLUSIONS : The integration of 47 road segments from 882 adjacent road segments indicate 8.87% of MAPE, which is within an acceptable range. It can reduce the traffic monitoring budget and increase the count to improve an accuracy of traffic volume estimation.

• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.36-42
• /
• 1997

This paper presents a new design technique for performing high quality low bit rate image compression. A hybrid coder(HC) which combines Mean Removed Important Coefficient Selection based JPEG(MR-ICS-JPEG) and Adaptive Vector Quantization (AVQ) is proposed. A new quantization table is developed using the Important Coefficient Selection(ICS) method; the importance of each coefficient is determined using the orthonormal property of the DCT. This quantization table is applied to standard JPEG with mean removal(MR) strategy before processing. This scheme, called MR-ICS-JPEG, produces more than 2 dB enhanced performance in terms of PSNR over standard JPEG. A set of homogeneous codebooks is generated by homogeneous training vectors. Before compression, an image is uniformly divided into 8${\times}$8 blocks. Low detail regions such as backgrounds are roughly coded by AVQ while high detail regions such as edges or curves are finely coded by the proposed MR-ICS-JPEG. This hybrid coder procuces consistently about 3 dB improved performance in terms of PSNR over standard JPEG.

• 한국지반공학회논문집
• /
• 제16권4호
• /
• pp.5-16
• /
• 2000

본 연구에서는 지금까지 수행한 일련의 결과들에 근거한 지반력 계수와 극한 지반반력을 역해석적 방법으로 결정하고 이를 이용하여 비균질 지반에서의 비선형 수평거동을 예측할 수 있는 해석기법을 제안하고자 함이 목적이다. Chang이 제안한 해석기법은 비균질 지반의 비선형적인 거동을 예측하기에는 어려움이 있다. 이에 본 연구에서는 말뚝의 비선형 거동 예측을 위하여 Chang 모델에 p - y 곡선을 적용하는 복합적인 해석기법을 제안하고 해석 프로그램을 개발하였다. 그리고 본 해석기법의 적용성 검증을 위하여 모형실험 및 현장실험 결과와 상용 프로그램인 Pentagon2D을 이용한 해석 결과와 비교 검토하였다. 해석상에 이용한 지반반력 계수와 극한 지반반력은 균질지반에서 결정된 값을 비균질 지반에 적용하였으며, 본 해석기법에 의한 거동 예측결과는 모형실험 결과와 잘 일치하였다. 또한 현장실험과의 비교에서도 정도 높은 일치성을 보였다.

• 유변학
• /
• 제10권4호
• /
• pp.202-216
• /
• 1998

기존의 'Orthotropic' 근사모델의 개선된 형태인 ORW를 새로운 유동 자료를 이용하여 수치적으로 구하였다. 기존의 'Orthotropic' 근사모델인 ORF나 ORL은 특히 전단유동 하에서 상호작용상수 $C_1$<0.001인 경우 비물리적 진동특성을 나타낸다. 물론 center-gated disk와 같은 비균일 유동하에서도 비물리적 진동특성을 나타내고 'Distribution Function Calculation'과 비교하여 배향 상태를 낮게 예측한다. 이런 현상들은 바로 least-square 최적화 시 사용된 유동 자료에 기인한 것을 알 수 있었다. 작은 상호작용계수의 균일 유동 자료를 이용하여 최적화를 한 ORW의 경우 비물리적 진동특성도 나타나지 않았고 균일 및 비균일 유동하에서 모두 정성적으로 잘 일치함을 확인할 수 있었다. 최적화 시 사용된 함수의 선택은 근사모델을 발전시키는데 그다지 영향을 미치지 못하였다. 하지만, 모든 배향 텐서의 eigenvalue들을 고려하면 보다 정량적으로 발전시킬 수 있지만 이들의 함수모양 선택은 중요하고 어려운 문제다. 비교를 위하여 ORW와 다른 여러 가지 근사모델을 이용하여 Film-gated strip과 Center-gated disk에 대한 연계효과 및 평면속도구배를 포함한 사출성형 충전공정의 수치모사를 수행하였다. ORW가 'Distribution Function Calculation' 과 비교하여 정량적으로도 거의 비슷한 결과를 예측함을 보여주지만 실제 실험자료와 비교하였을 때 약간의 차이가 있음을 확인하였다. 따라서 좀 더 정확히 섬유의 배향도를 예측하기 위해서는 섬유들의 상호작용을 나타내는 항의 모델링의 변화가 요구된다.

• Geomechanics and Engineering
• /
• 제9권6호
• /
• pp.709-727
• /
• 2015

The main aim of this study is to introduce optimal design of homogeneous earth dams with oblique and horizontal drains based on particle swarm optimization (PSO) incorporating weighted least squares support vector machine (WLS-SVM). To achieve this purpose, the upstream and downstream slopes of earth dam, the length of oblique and horizontal drains and angle among the drains are considered as the design variables in the optimization problem of homogeneous earth dams. Furthermore, the seepage through dam body and the weight of dam as objective functions are minimized in the optimization process simultaneously. In the optimization procedure, the stability coefficient of the upstream and downstream slopes and the seepage through dam body as the hydraulic responses of homogeneous earth dam are required. Hence, the hydraulic responses are predicted using WLS-SVM approach. The optimal results of illustrative examples demonstrate the efficiency and computational advantages of PSO with WLS-SVM in the optimal design of homogeneous earth dams with drains.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.182-189
• /
• 2004

The application of adhesively bonded components is increasing in various industries such as automobile, aircraft, IC packages, and soldering techniques. In spite of such wide application in adhesively bonded components, nondestructive test techniques applying to adhesively bonded components have not been clearly established yet. In this paper, characteristics of ultrasonic test on interfaces of adhesively bonded components have been investigated by calculating transmission coefficient theoretically and experimentally. From the experimental results, the optimum conditions to establish frequencies for adhesively bonded homogeneous and dissimilar components are 4∼6 MHz and 2∼4 MHz, respectively.