• Computers and Concrete
• /
• 제3권5호
• /
• pp.301-312
• /
• 2006

Experimental research revealed that the spatial dispersion of aggregate grains exerts pronounced influences on the mechanical and durability properties of concrete. Therefore, insight into this phenomenon is of paramount importance. Experimental approaches do not provide direct access to three-dimensional spacing information in concrete, however. Contrarily, simulation approaches are mostly deficient in generating packing systems of aggregate grains with sufficient density. This paper therefore employs a dynamic simulation system (with the acronym SPACE), allowing the generation of dense random packing of grains, representative for concrete aggregates. This paper studies by means of SPACE packing structures of aggregates with a Fuller type of size distribution, generally accepted as a suitable approximation for actual aggregate systems. Mean free spacing $\bar{\lambda}$, mean nearest neighbour distance (NND) between grain centres $\bar{\Delta}_3$, and the probability density function of ${\Delta}_3$ are used to characterize the spatial dispersion of aggregate grains in model concretes. Influences on these spacing parameters are studied of volume fraction and the size range of aggregate grains. The values of these descriptors are estimated by means of stereological tools, whereupon the calculation results are compared with measurements. The simulation results indicate that the size range of aggregate grains has a more pronounced influence on the spacing parameters than exerted by the volume fraction of aggregate. At relatively high volume density of aggregates, as met in the present cases, theoretical and experimental values are found quite similar. The mean free spacing is known to be independent of the actual dispersion characteristics (Underwood 1968); it is a structural parameter governed by material composition. Moreover, scatter of the mean free spacing among the serial sections of the model concrete in the simulation study is relatively small, demonstrating the sample size to be representative for composition homogeneity of aggregate grains. The distribution of ${\Delta}_3$ observed in this study is markedly skew, indicating a concentration of relatively small values of ${\Delta}_3$. The estimate of the size of the representative volume element (RVE) for configuration homogeneity based on NND exceeds by one order of magnitude the estimate for structure-insensitive properties. This is in accordance with predictions of Brown (1965) for composition and configuration homogeneity (corresponding to structure-insensitive and structure-sensitive properties) of conglomerates.

• 분석과학
• /
• 제28권1호
• /
• pp.26-32
• /
• 2015

육안검사, 지문융선의 특징점 비교 및 자동지문식별시스템의 특징점 검색기능을 이용해 잉크젯 프린터로 인공잠재지문을 반복적으로 출력해도 인공잠재지문이 균질하고 일관성 있게 출력된다는 것을 입증하였다. 표준잠재지문 출력용 master fingerprint pattern은 살아있는 사람의 지문을 종이에 찍은 후 이를 스캐너로 스캔하여 만들었고 Adobe Photoshop CS 5의 output level 조절기능을 이용해 이 master fingerprint pattern의 세기를 조절하였다. 인공 표준잠재지문은 master fingerprint pattern을 인공땀으로 채운 잉크젯 프린터 카트리지로 출력하는 방법으로 만들었다. 인공땀으로 출력한 표준잠재지문은 ninhydrin과 1,2-Indandion(1,2-IND)/$ZnCl_2$로 처리하여 현출하였다. 두 시약으로 현출한 지문을 육안으로 검사한 결과 잉크를 묻혀 찍은 원지문에 있는 특징들이 표준잠재지문에서도 동일하게 나타나는 것을 확인할 수 있었다. 인공땀을 이용하여 표준잠재지문 100점을 출력한 후 이 중 50점은 ninhydrin으로, 나머지 50점은 1,2-IND/$ZnCl_2$로 처리하여 현출한 후 AFIS의 연산기능을 이용해 특징점을 검색한 결과 ninhydrin으로 현출한 지문은 $52.4{\pm}2.4$개(range = 48~56), 1,2-IND/$ZnCl_2$로 처리한 지문은 $50.2{\pm}1.9$개(range = 47~53)의 특징점이 검색되었다. 이처럼 표준편차가 적게 나타난 점으로 보아 인공적으로 만든 표준잠재지문은 반복적으로 균질하게 출력된다는 것을 알 수 있었다.

• 분석과학
• /
• 제26권1호
• /
• pp.91-98
• /
• 2013

세계적으로 석면에 관한 다양한 연구사례가 발표되고 있는 가운데, 최근 미국을 비롯해 국내 또한 NOA (Naturally Occurring Asbestos)에 대한 관심으로 석면분포 광산 및 주변지역의 지질도 작성, 광산복원, 유해성 평가 등을 실시하고 있다. 본 연구에서는 토양 중 백석면을 분석하는 과정에서 정성, 정량 평가용 표준물질을 개발함으로써 분석결과에 대한 분석기관 및 분석자의 신뢰성 향상과 더불어 광학현미경의 기초자료를 확보고자 한다. 석면분석은 정성분석과 정량분석으로 구분하였으며, 석면정량을 위한 방법은 EPA 600-R-93-116의 점계수법(point counting)으로 총 400지점을 계수하는 방법으로 실시하였다. 제작된 2종에 해당하는 인증표준물질(CRM, Certified Reference Material)을 분산분석과 회귀분석을 이용하여 각각 균질성과 장기 안정성을 확인한 결과 이상이 없음을 확인하였다. 인증표준물질의 인증값은 점계수 결과의 최소값에서 최대값에 이르는 결과를 포함하며 저농도, 1% (범위, 0.25~3.00), 고농도, 4% (범위, 2.25~5.50)로 산출되었다.

• 대한간호학회지
• /
• 제50권2호
• /
• pp.286-297
• /
• 2020

Purpose: This study aimed to identify the effects of myofascial pain syndrome on shoulder pain, range of motion, and body composition around the shoulder in middle-aged women. Methods: A total of 72 women participated in the randomized controlled trial. The subjects were grouped into an experimental group (n=39) and a control group (n=33). The experimental group received a resistance exercise program using an elastic band for 8 weeks, 3 days a week. The control group followed a normal daily for 8 weeks. Measurements were conducted three times; before the experimental treatment (pre-test), the 2nd and 8th weeks after treatment. Results: Regarding the general characteristics and homogeneity of the dependent variables, there were no significant differences between the two groups, except for the thickness of the left and right muscles and the left fat. After treatment, shoulder pain was significantly different between the two groups (F=18.54, p<.001) and the range of shoulder motion was significantly different (left, F=86.70, p<.001; right, F=98.66, p<.001). Furthermore, there were a significant differences in the thickness of muscles between the two groups (left, F=40.20, p<.001; right, F=29.57, p<.001); however, the thickness of fat was not significantly different. Conclusion: The resistance exercise program reduces shoulder pain and improves the range of motion of the shoulder joint and increases muscle mass on around the shoulder. It suggests to conduct a study to confirm the long-term exercise effect.

• 대한방사선치료학회지
• /
• 제25권1호
• /
• pp.25-31
• /
• 2013

목 적: 양성자선의 유효비정 변화와 환자 자세의 재현성을 고려한 로버스트(robust-IMPT) 세기조절양성치료와 플레인 세기조절양성자치료(plain-IMPT) 계획과 광자선 세기조절방사선치료(photon-IMRT, step & shoot) 계획의 선량분포 특성을 비교, 분석하고자 한다. 대상 및 방법: 다섯 명의 전립선암 환자를 대상으로 표적에 70 Gy를 조사하도록 photon-IMRT (7문, step & shoot)와 plain-IMPT (2문, 4문, 7문) 및 robust-IMPT (유효 비정 오차 ${\pm}5%$ & 환자 자세 오차 0.5 cm 적용) 치료계획을 수립했다. 세 가지 치료계획으로 얻은 선량 분포 비교를 위해 PTV에 대한 선량조형지수(Conformity Index, CI), 선량균등지수(Homogeneity Index, HI) 및 최대선량, 최소선량, 평균선량과 OAR에 대한 선량-체적을 평가했다. 결 과: 모든 환자에 대해 photon-IMRT, plain-IMPT, robust-IMPT에서 PTV의 평균 최대선량은 각각 76.75 Gy (109.6%), 71.92 Gy (102.7%), 72.09 Gy (103%)였으며, 평균 최소선량은 68.21 Gy (97.4%), 68.89 Gy (98.42%), 68.13 Gy (98.13%)였으며, 전체 평균선량은 각각 71.02 Gy (101.4%), 71.32 Gy (100.4%), 70.75 Gy (101%)였다. PTV에 대한 CI 및 HI 값은 plain-IMPT가 photon-IMRT와 robust-IMPT에 비하여 1.02, 1.00으로 가장 낮았다. 또한, 정상장기에 있어 plain-IMPT가 photon-IMRT에 비하여 대부분 낮은 선량 분포를 보였으며, robust-IMPT 적용 시 정상 장기에 대한 선량 분포가 다소 변동의 폭은 있었지만 photon-IMRT에 비하여 대체로 낮은 선량 분포를 보였다. 결 론: 전립선암의 IMPT 치료 시 정확한 유효비정의 오차와 환자 자세 재현성오차를 고려한 robust-IMPT를 적용한다면 plain-IMPT의 선량학적 불확도를 줄이고 photon-IMRT에 비해 효과적인 치료를 제공할 수 있을 것이다.

• 한국세라믹학회지
• /
• 제36권10호
• /
• pp.1102-1107
• /
• 1999

SiC-Si3N4 composites were prepared by mixing $\alpha$-Si3N4 powder to $\alpha$-SiC powder in the range of 10 to 30 vol% with 10vol% interval. 6wg% Al2O3 and 6wt% Y2O3 were respectively added as sintering aids. Hot pressing was performed at 1,80$0^{\circ}C$ for 1 hour with 25 MPa pressure. In the case of adding 20vol% of $\alpha$-Si3N4 powder the relative density to theoretical value and the flexural strength were 99.1% and 34,420 MPa respectively and the worn amount was 2.09$\times$10-3 mm2 which were the highest values in the all range of he composition. Although the composite containig 10 vol% of $\alpha$-Si3N4 powder showed the highest fracture toughness(KIC) of 4.65MN/m3/2 the reduction of the wear resistance in this composite is likely to be affected by the homogeneity and the uniformity of the grain coalescence and growth during the sintering process.

• Journal of Microbiology and Biotechnology
• /
• 제19권10호
• /
• pp.1184-1190
• /
• 2009

A thermostable extracellular $\beta$-mannanase from the culture supernatant of a fungus Aspergillus niger gr was purified to homogeneity. SDS-PAGE of the purified enzyme showed a single protein band of molecular mass 66 kDa. The $\beta$-mannanase exhibited optimum catalytic activity at pH 5.5 and $55^{\circ}C$. It was thermostable at $55^{\circ}C$, and retained 50% activity after 6 h at $55^{\circ}C$. The enzyme was stable at a pH range of 3.0 to 7.0. The metal ions $Hg^{2+}$, $Cu^{2+}$, and $Ag^{2+}$ inhibited complete enzyme activity. The inhibitors tested, EDTA, PMSF, and 1,10-phenanthroline, did not inhibit the enzyme activity. N-Bromosuccinimide completely inhibited enzyme activity. The relative substrate specificity of enzyme towards the various mannans is in the order of locust bean gum>guar gum>copra mannan, with $K_m$ of 0.11, 0.28, and 0.33 mg/ml, respectively. Since the enzyme is active over a wide range of pH and temperature, it could find potential use in the food-processing industry.

• 한국실내디자인학회논문집
• /
• 제18권4호
• /
• pp.43-50
• /
• 2009

Design trend, transparency, which has been developed under a reflection of current periodic environment, has been exposed to people all over the world through varieties of architecture facade and interior space. As interior space follows this trend, which has difference in showing space from the past, transparency becomes an important measure of showing openness of certain space. Main objective of this research is to understand a characteristics of materials that leads transparency a important measure to the modern interior design, and this will set the range to this applicable materials for appropriate areas of defining transparency in an interior. Characteristic uses of transparent materials found in this research which leads transparency into interior space are described below: First, there are two perspectives in transparency. One is visibility and material wised transparency and the other is conditional and spacial wised transparency. With this knowledge, we can expand a level of transparency with ideas such as clarity, opacity, visible transmission, and reflection, and this broadened range will vary the acceptable materials used to show transparency. Second, transparent materials are used with many different purposes in modern interior space as furnitures, sanitary fixtures, partitions, and other structures. With using modern technology in reforming this materials brought new methods in structure composing. last, transparent materials' expnt pable characteristics made modern interior space to have a control over spacial homogeneity, a simplified octlines, weakened boundaries, and compositional effects by interference and vision.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.77-77
• /
• 2015

Metallic glass alloys having dense packing structure have short range ordered structure with long range homogeneity. Therefore, they can provide complete corrosion protection and unique electrical properties. Recently, metallic glass thin films have received much attention to extend its application fields combining with PVC coating technologies. The metallic glass thin films can change the surface properties of the conventional bulk materials which need anticorrosion properties. However, multi-component alloying targets are required to fabricate the metallic glass thin films because metallic glass alloys contain more than three elements. Recently, many researchers have been reported the properties of the metallic glass thin films synthesized with multi-cathode systems or amorphous target. But, it is difficult to fabricate the large sized sputtering targets for mass production equipment with high toughness and thermal stability. In this study, newly developed sputtering target with glass forming ability and the properties of the metallic glass thin films will be introduced with respect to the various application fields such as bipolar plate in PEM fuel cell and decorative coatings for electric device and construction fields.

• 보건의료산업학회지
• /
• 제13권2호
• /
• pp.121-133
• /
• 2019

Objectives: The purpose of this study was to determine the effectiveness of hand acupressure in relieving shoulder pain among male manufacturing workers. Methods: A nonequivalent control group was employed using a nonsynchronized design. Data were collected from two manufacturing plants located in metropolitan area U. The data were analyzed with a ${\chi}^2$-test and an independent t-test to perform a homogeneity test, and with repeated ANOVA measures to perform an hypothesis test using the SPSS 21.0 program. Results: Hypothesis 1 that "the experimental group provided with hand moxibustion would score lower for low shoulder pain than the control group" was supported (F=306.05, p<.001). Hypothesis 2, that "the experimental group provided with hand moxibustion would have a wider range of motion than the control group" was also supported with increased flexion(F=7.73, p<.001), extension(F=7.89, p=.001), abduction(F=21.23, p<.001), and horizontal abduction(F=20.89, p=.028). Hypothesis 3, that "the experimental group provided with hand moxibustion would score lower for quality of sleep than the control group" was not supported (F=56.10, p=.091). Conclusions: Hand moxibustion is effective in relieving shoulder pain for male manufacturing workers, in relieving low shoulder pain and increasing the range of motion.