• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.199-216
• /
• 2007

Stream Control Transmission Protocol(SCTP) is a transport layer protocol to support the data transmission. SCTP is similar to Transmission Control Protocol(TCP) in a variety of aspects. However, several features of SCTP including multi-homing and multi-streaming incur the performance difference from TCP. This paper highlights the data transfer during the initial slow start phase in SCTP congestion control composed of slow start phase and congestion avoidance phase. In order to compare the mean transfer time between SCTP and TCP, we experiment with different performance parameters including bandwidth, round trip time, and data length. By varying data length, we also measure the corresponding initial window size, which is one of factors affecting the mean transfer time. For the experiment, we have written server and client applications by C language using SCTP socket API and have measured the transfer time by ethereal program. We transferred data between client and server using round-robin method. Analysis of these experimental results from the testbed implementation shows that larger initial window size of SCTP than that of TCP brings the reduction in the mean transfer time of SCTP compared with TCP by 15 % on average during the initial slow start phase.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.595-607
• /
• 2004

Networks often evolve to provide a host with multiple access points to the Internet. In this paper, we propose a transport layer load distribution mechanism utilizing the multiple network interfaces simultaneously. We specifically propose an extension of Stream Control Transmission Protoco1 (SCTP) to have load sharing over multiple network interfaces. We named the particular service provided by the Proposed load sharing mechanism to be LS (Load Sharing) mode service. LS mode service is based on the following four key elements: (i) the separation of flow control and congestion control, (ii) congestion window based striping, (iii) redundant packet retransmission for fast packet loss recovery, (iv) a novel mechanism to keep track of the receiver window size with the SACKS even if they arrive out-of-order. Through simulations, it is shown that the proposed LS mode service can aggregate the bandwidth of multiple paths almost ideally despite of the disparity in their bandwidth. When a path with a delay of 100% greater is utilized as the second path, the throughput is enhanced about 20%.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.2
• /
• pp.25-32
• /
• 2000

Fire-resistant boom is one of the most important facilities in in situ homing of spilled oil. Thermal response of a fire-resistant boom to turning is experimentally investigated in this paper by using an electric furnace and a burning test facility. This test facility is composed of a test tank, a fire boom, a hood for inhaling smoke, an incinerator for burning up gases and thermocouples, etc. Thereby a systematic method of approach in small laboratory scale is developed to study the performance of a fire-resistant boom. Burning test is carried out for the fire boom model which has been developed through the present study. It is shown that the present fire boom model has capability to withstand the high temperature around 800℃ and high rate of heat flux on it due to homing. For more realistic experimental environments, larger dimensions in devices and longer time in experiments are recommended in near future.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.259-265
• /
• 2005

To measure burning rate of solid propellants using ultrasonic technique, a special closed bomb and an ultrasonic and pressure measurement system are fabricated. During pressurization tests and burning tests on propellants, ultrasonic and pressure signal are acquired in realtime fashion by this system. Based on acquired signals, analysis programs using two different algorithm which can measure burning rates corresponding to pressures are compared. One algorithm is to correct sound velocity variation of propellants and solid couplant, another one is only to correct sound velocity variation of propellants. And accuracies of homing rates measured through these algorithms are calculated through comparison with homing rates measured using strand burner method.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.4
• /
• pp.61-68
• /
• 2006

To measure burning rate of solid propellants using ultrasound, a special closed bomb and an ultrasonic and pressure measurement system are fabricated. During pressurization tests and homing tests on propellants, ultrasonic and pressure signal are acquired in real time fashion by this system. Based on acquired signals, analysis programs using two different algorithm which can measure burning rates corresponding to pressures are compared. One algorithm is to correct sound velocity variation of propellants and solid couplant, another one is only to correct sound velocity variation of propellants. And accuracies of homing rates measured through these algorithms are calculated through comparison with the burning rates measured using strand burner method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10B
• /
• pp.909-918
• /
• 2006

Recently, the qualities of the call and QoS of data service in mobile wireless IP networks inclusive of internet wired networks are very challenging issues. IntServ, DiffServ and MPLS model for supporting QoS in wired networks are representative models which are investigated generally up to now. While, MIPv4(Mobile IPv4) and MIPv6 are proposed to support mobility management for mobile wireless internet networks. But, MIPv4 and MIPv6 based UDP and TCP/IP protocol have many issues to be solved like efficient QoS and frequent handover management. In this paper, we propose a efficient management platform to support seamless data services and end-to-end QoS management in IP-based wireless mobility environments using transport layer protocol, SCTP which support multi-homing and multi-streaming. We used SCTP protocol and IntServ technology for end-to-end communications to support multi-homing and seamless QoS management in the IP-based mobile wireless networks.

• 대한공업교육학회지
• /
• v.33 no.1
• /
• pp.233-248
• /
• 2008

Stream Control Transmission Protocol(SCTP) is a new transport protocol that is known to provide improved performance than Transmission Control Protocol(TCP) in multi-homing environment that is having two and more IP addresses. But currently single-homed computer is used primarily that is having one IP address. To identify whether mean transfer time for SCTP is faster that for TCP in single-homed environment considering packet loss, we make up real testbed regulating the bandwidth, delay time and packet loss rate on router and observe the transfer time. We write server and client applications to measure SCTP and TCP mean transfer time by C language. Analysis of these experimental results from the testbed implementation shows that mean transfer time of SCTP is not better than performance of TCP in single homed environment exceptional case. Main reasons of performance are that SCTP compared to TCP stops transmitting data by timeout and data transmission is often delayed when SACK congestion happens. The result of study shows that elaborate performance tuning is required in developing a new SCTP module or using a implemented SCTP module.

• Journal of the Korea Society for Simulation
• /
• v.25 no.3
• /
• pp.53-63
• /
• 2016

We consider simulation study combining static and mobile decoys for survivability of a surface warship against torpedo attack. It is assumed that an enemy torpedo is a passive acoustic homing torpedo and detects a target within its maximum target detection range and search beam angle by computing signal excess via passive sonar equation, and a warship conducts an evasive maneuvering with deploying static and mobile decoys simultaneously to counteract a torpedo attack. Suggesting the four different decoy deployment plans to achieve the best plan, we analyze an effectiveness for a warship's survival probability through Monte Carlo simulation, given a certain experimental environment. Furthermore, changing the speed and the source level of decoys, the maximum torpedo detection range of warship, and the maximum target detection range of torpedo, we observe the corresponding survival probabilities, which can provide the operational capabilities of an underwater defense system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.27-33
• /
• 2022

The small infrared image homing sensor is the eye of a guided weapon that has an infrared image sensor that identifies a target on the ground through day and night infrared image processing and searches, detects, and tracks the target. Inside the guided weapon since the power supply and communication line are used together with various components, the part against electromagnetic wave interference is very important. In particular, the effect of CE (Conducted Emission) through the power and communication lines connected by cables is very important. Through this method, it is possible to directly affect other components of the guided weapon. In this paper, the EMI filter and cable design for avoiding electromagnetic interference to the power input through the cable and the communication line are described. Also, the designed EMI filter is manufactured After the CE102 test of MIL-STD-461G, design satisfaction will be explained.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.3
• /
• pp.155-164
• /
• 2010

This paper proposes a robust detection method for ship wake search using two wake sensors. A long trailing wake in the rear of a surface ship is generated along the track of surface ships. In this paper, we assume that the nearer the surface ship, the stronger wake strength is and a two-sensor based wake homing torpedo can sense for the wake strength. On this assumption we propose a simple wake detection and search method using information of wake strength. Experimental results using monte-carlo simulation demonstrate that the proposed method yields better performance in search time than previous method, which uses a single sensor. Our method is shown faster by about 45 seconds than previous method to achieve the same performance. Also, it can improve the detection performance of torpedo in the case of short wake length.