• 상하수도학회지
• /
• 제17권4호
• /
• pp.519-527
• /
• 2003

Cake layer in crossflow microfiltration(CFMF) can be reduced by coagulation, enhancing membrane flux. This is because enlarging particle size by coagulation increases shear-induced diffusivity and the back-transport of rejected particles. However it is known that the enlarged particles are disaggregated by the shear force of the pump while passing through it. This study is to look at the disaggregation in relation with cake layer reducation. Kaolin and polysulfon hollow fiber microfilter are used for experiment. The reduction of cake resistance by coagulation is observed in a range of 17% to 53% at the various coagulation conditions. The particle size analysis results of the experiments show that aggregated particles in feed are completely disaggregated by pump but re-aggregation of particles occurs in membrane. This suggestes that the re-aggregation of particles is critical to cake reduction and flux enhancement, since the aggregated particles are completely broken. The mechanisms for re-aggregation in membrane are the same with those for coagulation in feed tank. Charge neutralization is better for CCFMF than sweep flocculation although it has two drawbacks in operation.

• Structural Engineering and Mechanics
• /
• 제66권3호
• /
• pp.379-386
• /
• 2018

The present study addresses the direct and indirect methods of determining the mode-I fracture toughness of concrete using experimental tests and particle flow code. The direct method used is compaction tensile test and the indirect methods are notched Brazilian disc test, semi-circular bend specimen test, and hollow center cracked disc. The experiments were carried out to determine which indirect method yields the fracture toughness closer to the one obtained by the direct method. In the numerical analysis, the PFC model was first calibrated with respect to the data obtained from the Brazilian laboratory test. The crack paths observed in the simulated tests were in reasonable accordance with experimental results. The discrete element simulations demonstrated that the macro fractures in the models are caused by microscopic tensile breakages on large numbers of bonded particles. The mode-I fracture toughness in the direct tensile test was smaller than the indirect testing results. The fracture toughness obtained from the SCB test was closer to the direct test results. Hence, the semi-circular bend test is recommended as a proper experiment for determination of mode-I fracture toughness of concrete in the absence of direct tests.

• 한국세라믹학회지
• /
• 제20권2호
• /
• pp.135-146
• /
• 1983

This study is to investigate the properties of domestic fly ash for utilization as data in regard to fly ash which is by-product of domestic coal powder plants and the possibility of utilization as insulation material of domestic fly ash. Composition refractoriness size distribution density contents of hollow particles and crystalline phase were examined as the properties of domestic fly ash. As to the fired test pieces of fly ash by itself that varied contents of hollow particles with four kinds and of the fly ash-clay-saw dust system linear shrinkage bulk density app. porosity compressive strength thermal conductivity and structures were investigated for the possibility of utilization as an insulation material. The results are as follows : 1. The properties of the fly ash I) The constituent particle of the fly ash is spherical and it contains not a few hollow particles (floats by water 0.30-0.50 floats by $ZnCl_2$ aq.(SpG=1.71) 6.97-16.72%). ii) The chemical compositions of fly ash are $SiO_243.9-54.1%$ , $Al_2O_321.0-30.7%$ Ig loss is 7.4-24.1% and the principal of Ig loss is unburned carbon. iii) Fly ash was not suitable to use for mortar and concrete mixture because Ig. loss value is higher than 5% 2. Utilization as insulation material I) The test pieces of original fly ash floats by water floats by ZnCl2 aq(SpG=1.71) p, p t by ZnCl2 aq.(SpG=1.71) that were fired at 110$0^{\circ}C$ represented 0.11-0.18 kcal/mh$^{\circ}$ C as thermal conductivity value. ii) The test pieces which (76.5-85.5) wt% fly ash-(8.5, 9.5) wt% clay-(5.0-15.0) wt% saw dust system(68.0-72.0) wt% fly ash -(17.0-18.0)wt% clay-(10.0-15.0) wt% saw dust system and 59.5 wt% fly ash-25.5 wt% clay-15.0wt% saw dust system were fired at 110$0^{\circ}C$ the thermal conductivity was less than 0.1Kcal/mh$^{\circ}$ C. iii) In view of thermal conductivity and economic aspect insulation materials which added saw dust as blowing agent and clay as inorganic binder are better than that of fly ash as it is or separated hollow fly ash particles. iv) When the saw dust contents increased in the (59.5-90.0) wt% saw dust system and when amount of clay de-creased and firing temperature decreased under the condition of equal addition of saw dust app. porosity increased but bulk density compressive strength and thermal conductivity decreased.

• Korean Chemical Engineering Research
• /
• 제62권1호
• /
• pp.99-104
• /
• 2024

본 연구에서는 고용량 리튬이온배터리용 음극 소재로 탄소 코팅된 할로우 구조의 실리콘(HSi/C) 복합소재를 제조하였다. CTAB (N-Cetyltrimethylammonium bromide)이 첨가된 Stöber법을 통해 할로우 실리카(HSiO₂)를 합성하였으며, HSiO₂를 마그네슘열 환원한뒤 표면에탄소를 코팅하여 HSi/C 음극복합소재를 제조하였다. 복합소재의물리적 특성과 전기화학적 특성을 CTAB 조성에 따라 조사하였다. FE-SEM 분석 결과 CTAB 조성이 감소할수록 HSiO₂ 입자의 크기가 커졌으나 두께는 감소하였다. 제조된 HSi/C 소재는 다양한 CTAB 비율(0.5, 1.0, 1.5)에서 각각 2188.6, 2164.5, 1866.7 mAh/g의 높은 초기 방전용량을 나타내었으며, 100 사이클의 충·방전 후 0.5-HSi/C가 1171.3 mAh/g의 높은 가역 용량과 70.9%의 용량 유지율을 보여주었다. 전기화학 임피던스 분광법(Electrochemical Impedance Spectroscopy, EIS)으로 저항 특성을 분석하였으며, 0.5-HSi/C 소재가 20 사이클 이후 다른 CTAB 조성의 HSi/C 복합소재에 비해 안정적인 저항 특성을 보이는 것을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.182.2-182.2
• /
• 2016

Hollow cathode discharge(중공 음극)는 음극 표면에서 발생되는 2차 전자를 이용하여 높은 밀도의 플라즈마를 만들 수 있는 장점이 있다. 전원으로 microwave, RF, DC, pulsed dc등을 사용할 수 있으며 박막의 증착, 식각 등에 응용 가능하다. 물리적 현상으로는 중공 음극 재료 표면 물질의 가열 및 이온 스퍼터링, 2차 전자의 가열, 자기장 인가 구조의 경우 전자 거동이 있다. PIC(particle-in-cell)방식의 모델링과 fluid model을 이용한 방법이 있는데 본 연구에서는 상용 fluid model software인 ESI사의 CFD-ACE+를 사용하여 모델링 하였다. 구동 주파수는 13.56 MHz의 상용 고주파 전원과 보다 낮은 1 MHz, 100 kHz의 수치 모델을 이용하여 HF, MF, LF 영역에서의 동작 특성을 해석하였다. 1차적으로는 가스 유동의 특성을 2D, 3D로 조사하였고 플라즈마 거동은 2차원을 주로 진행하였으며 계산 시간이 오래 거리는 3차원 모델을 하나 만들어 그 특성을 조사하였다.

• 펄프종이기술
• /
• 제36권2호
• /
• pp.47-53
• /
• 2004

In this experiment the effects of the packing structure of pigment on the surface characteristics (smoothness and gloss) of coated paper are studied. Four different kinds of inorganic pigments(clay), ground calcium carbonate(GCC), two of precipitated calcium carbonates(PCC), and two organic pigments(solid bead and hollow type) were used. The method of measuring the relative sediment volume(RSV) was used to analyze the packing structure of coating layer. The relative sediment volume was measured, using the pressure dewatering dry-cake method(PDDM) and centrifuge method. Also, the particle size distribution of coating pigment was determined. The results showed that small amount of organic pigment, added to inorganic pigment, improved smoothness and its effect was greater when GCC was used as inorganic pigment. The efficiency of organic pigment depended upon the inorganic pigment since the organic pigment is packed in the pores formed by the inorganic pigment.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.27-33
• /
• 2002

This paper presents the comparison of prediction accuracy of hybrid models. To obtain the experimental results fur comparing with the numerical results, the macroscopic and microscopic structures of the hollow-cone spray such as spray development process, spray penetration and the distribution of mean droplet size are investigated by using a shadowgraph technique and phase Doppler particle analyzer. Also, the numerical researches using various hybrid models are performed. LISA model and WAVE model are used for the primary breakup, and TAB, DDB, and RT model are used for the secondary breakup.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1533-1535
• /
• 1994

The Monte-Carlo simulation was used to define the physical mechanisms of the initiation phase of pseudo-spark discharge. The pseudo-spark discharge employing the hollow cathode geometry is accompanied by very fast current rising and intense charged particle beams. In this model, time-dependent continuity equation for the electrons and ions were solved consistently with Poisson's equation for the electric field in a two-dimensional, sysmmetrically cylinderical geometry. From the simulation, a sequence of physical mechanisms that cause the rapid current rise associated with the onset of pseudo-spark discharge mode were identified.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.203-210
• /
• 2002

A new PIM in-process joining technique has been developed for more complicated and functional PIM components by application of the exuded wax from the green compacts during solvent debinding step. At first, various stainless steels and iron compacts with rectangular shape were combined, and the joining behaviors and properties were investigated by shear and tensile test, and microscopic observation. Subsequently, perfect joined three pieces of thin and hollow compacts were obtained for the combination of same and different stainless steels, and it was difficult to join the iron and stainless steel compacts in hydrogen atmosphere because of the different starting temperature of shrinkage. However, pretty good joined iron and stainless steel compacts were obtained by consideration of particle size and vacuum atmosphere. Finally, for the combination of ferro-silicon and austenitic stainless steel compacts, high functionality (magnetic (1.60Tes1a) & non-magnetic) and perfect joint were obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.544-547
• /
• 2000

Polypyrrole (PPy) was chemically synthesized within the pores of nanoporous polycarbonate (PC) Particle Track-etched Membranes (nano-PTM). Hollow tubules are formed because polypyrrole initially deposits on the surface of the pores walls. By running successive syntheses, we have obtained wires (filled tubules). The redox property of PPy nanotubules was investigated by cyclic voltammetry. The redox potential was lowered as much as 0.5V vs. Ag/AgC1, comparing with electrosynthesized PPy film. It suggests that an electron hopping mechanism of PPy nanotubules was improved. Electric conductivity of PPy nanotubules and nanowire was evaluated. We obtained good electric conductivity of PPy nanotubules even in the neutral state. The conductivity and activation energy were $10^1$ order at the room temperature and 25.3 meV respectively.