• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.10-15
• /
• 2023

The carbonaceous materials have attracted much attention for utilization of anode materials for lithium-ion batteries. Among them, hollow carbon spheres have great advantages (high specific capacity and good rate capability) to replace currently used graphite anode materials, due to their unique features such as high surface areas, high electrical conductivities, and outstanding chemical and thermal stability. Herein, we have synthesized various sizes of hollow carbon spheres by a facile hardtemplate method and investigated the anode properties for lithium-ion batteries. The obtained hollow carbon spheres have uniform diameters of 350 ~ 600 nm by varying the template condition, and they do not have any cracks after the optimization of the process. Increasing the diameter of hollow carbon spheres decreases their specific capacities, since the larger hollow carbon spheres have more useless spaces inside that could have a disadvantage for lithium storage. The hollow carbon spheres have outstanding rate and cyclic performance, which is originated from the high surface area and high electrical properties of the hollow carbon spheres. Therefore, hollow carbon spheres with smaller diameters are expected to have higher specific capacities, and the noble channel structures through various doping approaches can give the great possibility of high lithium storage properties.

• 한국분말재료학회지
• /
• 제27권2호
• /
• pp.132-138
• /
• 2020

A facile one-pot wet chemical process to prepare pure anatase TiO₂ hollow structures using ammonium hexafluorotitanate as a precursor is developed. By defining the formic acid ratio, we fabricate TiO₂ hollow structures containing fluorine on the surface. The TiO₂ hollow sphere is composed of an anatase phase containing fluorine by various analytical techniques. A possible formation mechanism for the obtained hollow samples by self-transformation and Ostwald ripening is proposed. The TiO₂ hollow structures containing fluorine exhibits 1.2 - 2.7 times higher performance than their counterparts in photocatalytic activity. The enhanced photocatalytic activity of the TiO₂ hollow structures is attributed to the combined effects of high crystallinity, specific surface area (62 ㎡g^-1), and the advantage of surface fluorine ions (at 8%) having strong electron-withdrawing ability of the surface ≡ Ti-F groups reduces the recombination of photogenerated electrons and holes.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.531-538
• /
• 2012

Hollow silica spheres were prepared by spray drying of precursor solution of colloidal silica. The precursor solution is composed of 10-20 nm colloidal silica dispersed in a water or ethanol-water mixture solvent with additives of tris hydroxymethyl aminomethane. The effect of pH and concentrations of the precursor and additives on the formation of hollow sphere particles was studied. The spray drying process parameters of the precursor feeding rate, inlet temperature, and gas flow rate are controlled to produce the hollow spherical silica. The mixed solvent of ethanol and water was preferred because it improved the hollowness of the spheres better than plain water did. It was possible to obtain hollow silica from high concentration of 14.3 wt% silica precursor with pH 3. The thermal conductivity and total solar reflectivity of the hollow silica sample was measured and compared with those values of other commercial insulating fillers of glass beads and $TiO_2$ for applications of insulating paint, in which the glass beads are representative of the low thermal conductive fillers and the $TiO_2$ is representative of infrared reflective fillers. The thermal conductivity of hollow silica was comparable to that of the glass beads and the total solar reflectivity was higher than that of $TiO_2$.

• 한국세라믹학회지
• /
• 제44권2호
• /
• pp.84-88
• /
• 2007

CdSe hollow spheres with the diameter of about 30-50 nm were synthesized after ultrasonic irradiation in the presence of $Cd(NO_3)_2,\;Na_2SeSO_3$, and polyvinylalcohol(PVA). The characteristics of CdSe hollow spheres were analyzed using X-ray diffraction(XRD), transmission electron microscopy(TEM), UV-vis measurement and PL spectrometer. The characteristics of solvent as water and water-1-propanol mixture in the system played important roles on the controlled synthesis of hollow sphere. Based on the observation of morphological difference of CdSe, the possible mechanism of CdSe hollow sphere formation will be discussed.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.41-42
• /
• 1993

• 한국분말재료학회지
• /
• 제12권4호
• /
• pp.291-295
• /
• 2005

CdSe hollow sphere with average size of about 30-50 nm was synthesized from the mixed solution of cadmium chloride $(CdCl_2)$, sodium selenosulfate $(Na_2SeSO_3)$ and ethylenediamine(EDA, $H_2NCH_2CH_2NH_2$) at room temperature. The molar ratio of EDA to $Cd^{2+}$ showed the most significant effect on the morphology of CdSe hollow sphere. This paper will present and discuss the possible formation mechanism of CdSe hollow sphere based on the observation of morphological changes.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.403-409
• /
• 2015

Porous alumina ceramics are involved in many industrial applications due to the exceptional properties of these products. This study addresses the preparation of porous alumina ceramics using hollow microspheres as a pore-forming agent and slip casting as a green-body-forming technique. A uniform distribution of pores is a basic requirement of a porous material. This study investigates three different slurry systems, i.e., as-prepared alumina slurry, alumina slurry electrostatically dispersed by hydrochloric acid (HCl), and slurry dispersed by the commercial dispersant 'Darvan C-N'. At a low viscosity, the hollow microspheres in the slurry tend to float, which causes a non-uniform pore distribution. To avoid this phenomenon, the viscosity of the slurry was increased to the extent that the movement of hollow microspheres ceased in the slurry. As a result, a uniform pore distribution was achieved.

• 콘크리트학회논문집
• /
• 제24권4호
• /
• pp.391-398
• /
• 2012

이 연구는 도넛형 중공형성체를 사용한 이방향 중공슬래브의 일방향 전단 성능에 관한 연구이다. 최근 건물의 고층화 및 장경간화로 인하여, 다양한 자중 저감형 슬래브 공법에 대한 연구가 진행되고 있다. 이방향 중공슬래브 시스템은 구조성능 저하를 최소화하면서 자중을 효율적으로 줄일 수 있는 시스템으로 알려져 있다. 하지만 기존 연구에 따르면 이방향 중공슬래브는 일반 RC 슬래브에 비해 낮은 전단강도를 가지고 있으며, 이는 중공형상 및 중공형성체 재료에 의해 영향을 받는 것으로 보고되고 있다. 또한 현재의 설계기준은 이방향 중공슬래브의 일방향 전단강도에 대해 명확한 기준을 제시하지 못하고 있다. 도넛형 이방향 중공슬래브의 일방향 전단강도를 확인하기 위하여, 총 4개의 전단강도 실험체를 제작/실험하였다. 그 중 한 개의 실험체는 기준 RC 실험체이고 나머지는 모두 중공슬래브이다. 변수는 도넛형과 비도넛형 두 가지의 중공형상 및 일반 플라스틱과 유리섬유 강화 플라스틱 중공형성체로 설정하였다. 실험 결과, 중공형상과 재료에 따라 이방향 중공슬래브의 전단강도는 차이를 보임을 확인할 수 있었다. 또한 이 결과를 바탕으로 기존의 구형 중공슬래브의 일방향 전단강도 산정시 사용되는 유효단면 산정법의 도넛형 이방향 중공슬래브 적용에 대한 문제점을 도출하였다.

• 대한금속재료학회지
• /
• 제49권12호
• /
• pp.950-955
• /
• 2011

In the present study, the formation of hollow Cu oxide nanoparticles through the oxidation process at temperatures from 200 to $300^{\circ}C$ has been studied by transmission electron microscopy with Cu nanoparticles produced by the plasma arc discharge method. The Cu nanoparticles had a thin oxide layer on the surface at room temperature and the thickness of this oxide layer increased during oxidation in atmosphere at $200-300^{\circ}C$ However, the oxide layer consisted of $Cu_2O$ and CuO after oxidation at $200^{\circ}C$ whereas this layer was comprised of only CuO after oxidation at $300^{\circ}C$ On the other hand, hollow Cu oxide nanoparticles are obtained as a result of vacancy aggregation in the oxidation processes, resulting from the rapid outward diffusion of metal ions through the oxide layer during the oxidation process.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.521-527
• /
• 2005

Surface modification of polypropylene hollow fiber membranes was peformed in order to develop blood-compatible biomaterials for use in the blood contacting and oxygenation membranes of a lung-assist device(LAD). Blood compatibility was determined by using anticoagulation blood and evaluating formation of blood clots on their surfaces as well as activation of plasma coagulation cascade, platelet adhesion, and aggregation. It was verified that the number of platelets on the silicone coated fibers was significantly lower than those on polypropylene. It was also found that the polypropylene hollow fiber membranes using plasma treatment exhibited suppression of complement activation in blood compatibility test.