• 한국패류학회지
• /
• 제27권1호
• /
• pp.35-42
• /
• 2011

In order to understand effect of polycyclic aromatic hydrocarbon (PAH) on shell repair of the Pacific oyster, Crassostrea gigas, shell regeneration experiments were carried out using oysters drilled a hole on the right valve. The change of pH and hemocytic characteristics in both extrapallial fluid and hemolymph were observed during the shell repair. The thickness of mantle tissue was apparently decreased, while necrosis in epithelium and periostracal gland was increased in response to PAH exposure. Our finding suggested that PAH could adversely influence on shell repair.

• 산업공학
• /
• 제13권4호
• /
• pp.591-598
• /
• 2000

In this paper, an efficient algorithm is proposed to find parting lines(PL) and generate parting surfaces(PS) for an injection mold design. We used a Face-Edge Graph which can be made by B-rep information of solid model. The graph is useful for finding the peripheral-loop edges for PL and the inner-loop edges for hole-patch. The PS can be generated automatically by selecting pre-defined direction lines. We can create a core and cavity molds by trimming the raw stock block with the PS and the upper/lower faces of a product model. We implemented proposed method with Unigraphics API functions and C language, and tesed on Unigraphics V15.

• 한방안이비인후피부과학회지
• /
• 제17권2호
• /
• pp.140-145
• /
• 2004

Systemic lupus erythematosus is a disease of unknown etiology that affects many organ system and is characterized by the presence of multiple autoantibodies that participated in immunology mediated tissue injury. A 36 years-old female patient was admitted to ward due to high fever and erythematous rash on face and hole body. She exhibited itching sense, joint pain, nausea, fatigue, sensitivity to light. The homatologic finding revealed anemia, decrease of lymphocyte, low platelet count, but LE cell, Anti nuclear antibody(ANA) were negative. In the point of Differentiation of Syndrome(辨證), SLE can be thought to be a category of Seasonal febril disease(溫病). This subject diagnosed as Domination of intense evil heat(熱毒熾盛), and was administrated with Chungonpadocyem-gamibang(淸瘟敗毒飮加味方). The clinical and laboratory findings of our patient were improved by herb medication, acupuncture therapy and general supportive measure.

• 한국소음진동공학회논문집
• /
• 제24권11호
• /
• pp.883-889
• /
• 2014

Mufflers have been widely used in the exhaust system to reduce the noise. However, installing muffler may deteriorate the efficiency due to the increase of back pressure. Mufflers usually consist of partition plates and perforated holes in a expansion chamber. In this paper, the influences of the location of the partition and hole on the acoustic TL and back pressure were examined. The acoustic TL was predicted using virtual lab commercial software, while the back pressure were predicted using CFX commercial software. The results were used to set up a database for finding their trends. The optimal muffler model in user-interested frequency range could be selected by analyzing this database.

• 한국임상수의학회지
• /
• 제35권6호
• /
• pp.276-278
• /
• 2018

A neutered male Maltese, 11-year-old, presented for hard mass at right flank suddenly. Patient vomited and had anorexia before the presentation, but it is improved after. On blood tests, there were no remarkable findings. On physical examination, firm mass ($2.9{\times}2.6cm$, firm) was detected. No remarkable finding was shown in radiography except for right upper-medial abdominal subcutaneous soft tissue mass. Punch biopsy was performed for histopathologic examination. During the punch biopsy, ice-cream stick ($11.5{\times}1.2cm$) appeared from the hole on right flank. Additionally gastric perforation was detected on ultrasonography. Emergency surgery was performed for the perforation. On histiopathologic examination of the mass, marked, diffuse, neutrophilic and mild eosinophilic dermatitis/cellulitis with no infectious agents was observed.

• 천문학회보
• /
• 제46권1호
• /
• pp.31.1-31.1
• /
• 2021

We report the Gemini Multi-Object Spectrograph (GMOS) Integral Field Unit (IFU) observation of a red active galactic nucleus (AGN), 2MASSJ165939.7+183436 (1659+1834). 1659+1834 is a prospective merging supermassive black hole (SMBH) candidate due to its merging features and double-peaked broad emission lines. The double-peaked broad emission lines are kinematically separated by 3000 km/s, with the SMBH of each component weighing at 10^8.9 and 10^7.1 solar mass. Our GMOS IFU observation reveals that the two components of the double-peaked broad emission line are spatially separated by 0.085" (~250pc). In different assumptions for the line fitting, however, a null (<0.05") or a larger spatial separation (~0.15") are also possible. For this GMOS IFU observational results of 1659+1834, various models can be viable solutions, such as the disk emitter and multiple SMBH models. We believe that these results show the need for future research of finding more multiple SMBH systems in red AGNs.

• 한국콘텐츠학회논문지
• /
• 제14권2호
• /
• pp.1-9
• /
• 2014

영상 인페인팅(image inpainting)은 영상에서 훼손된 부분을 복원하거나 영상 내의 불필요한 문자나 특정 물체를 제거한 후 삭제된 영역을 자연스럽게 채우기 위해 널리 사용되는 기법이다. 예제기반 인페인팅은 비어있는 영역에서 어떤 부분부터 채울 것인지를 결정하는 패치 우선순위 결정과 결정된 패치를 어떤 패치로 채울 것인지 결정하는 패치탐색의 두 부분으로 구성되어 있다. 기존 예제기반 인페인팅에서는 패치 내의 알고 있는 영역의 화소 값만을 이용하여 유사패치를 탐색한다. 이는 패치의 일부분만 이용하여 비교하게 되므로 비교 대상이 아닌 영역에 상관성이 없는 화소 값을 갖는 패치가 선택될 수 있다. 이를 개선하기 위해 본 논문에서는 패치외삽을 이용한 예제기반 인페인팅 방식을 제안한다. 제안 방식은 우선순위가 결정된 패치에 대해 패치 내 이미 알고 있는 영역의 화소 값을 이용하여 패치 내 비어있는 영역의 화소 값을 외삽 방식으로 예측치를 구하여 채운 후 유사 패치를 탐색한다. 실험 결과를 통해 제안방식이 기존 예제기반 인페인팅 방식에 비해 자연스러운 결과 영상을 얻을 수 있음을 보여준다.

• 전자공학회논문지
• /
• 제54권5호
• /
• pp.65-73
• /
• 2017

본 논문에서는 홀 영역과 시차 불연속 영역을 개선하기 위한 스테레오 정합 기법을 제안한다. 스테레오 정합 기법은 두 영상에서의 정합 점을 탐색하여 시차 지도를 추출한다. 하지만 기존의 스테레오 정합 기법들은 스테레오 영상의 베이스 라인 길이에 따라서 정확도와 정밀도가 반비례하는 문제점이 있다. 또한 영상의 폐색 영역과 특징 부족으로 인한 시차 불연속 영역이 존재한다. 제안한 기법에서는 개선된 AD-Census-Gradient 방법과 적응적 가중치 기반의 비용 결합을 통하여 불연속 영역과 오 정합 영역을 개선한 초기 시차 지도를 추출하였다. 그 후에 시차 지도 재생성 과정을 수행하여 오정합 영역을 개선함과 동시에 영상의 정밀도를 개선하였다. 실험 결과 제안하는 기법이 기존의 정합률이 높은 방법들과 비교하여 높은 수준의 정합률을 유지하면서 오정합 영역과 정밀도를 개선하였음을 보였다. 그리고 정합 오차율이 높은 영상의 경우, 최근에 발표된 스테레오 정합 방법들보다 정합 성능이 평균적으로 3.22(%)가량 증가하였다.

• 소음진동
• /
• 제11권2호
• /
• pp.276-284
• /
• 2001

In apartment buildings, floor-impact sound has been regarded as the major source that causes complaints from residents. It is mainly due to the use of light-weight structures and the lack of researches in terms of floor-impact sound. The purposes of this study are analyzing the characteristics of vibration response and sound radiation of 12type void slabs in the improvements void slab by impedance method and finding the fittest improvements void slab on the 12type void slab. The main results of this study are summarized as below: (1) In the $\frac{1}{3}$ octave band level of sound radiation, $\frac{1}{3}$ octave band levels, measured from four-divided improvement void slab(No.8) and eight-divided improvement void slab(No.12), are 10~25 dB lower than that of standard void slab(No.1) in the 1250 Hz. Especially, eight-divided improvement void slab(No.12) is the best void slab in terms of radiation efficiency of sound level. (2) In the correlation relation of acceleration and sound radiation, standard void slab(No.1), four-divided improvement void slab(No.8), SK standard four-hole void slab(No.10), and eight-divided improvement void slab(No.12) are positive correlation relation.

• 한국정밀공학회지
• /
• 제24권4호
• /
• pp.153-158
• /
• 2007

Recently nano imprint lithography to fabricate photonic crystal on polymer is preferred because of its simplicity and short process time and ease of precise manufacturing. But, the technique requires the precise mold as an imprinting tool for good replication. These molds are made of the silicon, nickel and quartz. But this is not desirable due to complex fabrication process, high cost. So, we describe a simple, precise and low cost method of fabricating PDMS stamp to make the photonic crystals. In order to fabricate the PDMS mold, we make the original pattern with designed hole array by finding the optimal electron beam writing condition. And then, we have tried to fabricate PDMS mold by the replica molding with ultrasonic vibration and pressure system. We have used the cleaning process to solve the detaching problem on the interface. Using these methods, we acquired the PDMS mold for photonic crystals with characteristics of a good replication. And the accuracy of replication shows below 1% in 440nm at diameter and in 610nm at lattice constant by dimensional analysis by SEM and AFM.