• Current Photovoltaic Research
• /
• v.9 no.3
• /
• pp.96-105
• /
• 2021

Even though above 22% efficiencies have been reported in Cd-free Cu(In,Ga)Se₂ (CIGS) solar cell with Zn-containing buffers, the efficiencies with Zn-containing buffers, in general, are well below 20%. One of the reasons is Zn diffusion from the Zn-containing buffer layer to CIGS film during buffer growth. To avoid the degradation, it is necessary to prevent the diffusion of Zn atoms from Zn-containing buffer to CIGS film. For the purpose, we characterized an In₂Se₃ film as a possible diffusion barrier layer because In₂Se₃ has no Zn component. It was found that an In₂Se₃ layer grown at 300℃ was very effective in preventing Zn diffusion from a Zn-containing buffer. Also, the In₂Se₃ had a large potential barrier in the valence band at the In₂Se₃/CIGS interface. Therefore, In₂Se₃ passivation has the potential to achieve a super-high efficiency in CIGS solar cells that employ Cd-free ALD processed buffers containing Zn.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.2
• /
• pp.175-186
• /
• 2023

The buffer materials in disposal hole are exposed to the decay heat from spent nuclear fuels and groundwater inflow through adjacent rockmass. Since understanding of thermal-hydro-mechanical-chemical (T-H-M-C) interaction in buffer material is crucial for predicting their long-term performance and safety of disposal repository, it is necessary to investigate the heating-hydration characteristics and consequent T-H-M-C behavior of the buffer materials under disposal conditions considering geochemical factors. In response, the Korea Atomic Energy Research Institute developed a laboratory-scale 'Lab.THMC' experiment system, which characterizes the T-H-M behavior of buffer materials under different geochemical conditions by analyzing heating-hydration process and stress changes. This technical report introduces the detail design of the Lab.THMC system, summarizes preliminary experimental results, and outlines future research plans.

• Journal of Korean Academy of Nursing
• /
• v.15 no.1
• /
• pp.30-43
• /
• 1985

Liver cirrhosis is the common cause of death in Korea today. But, if liver cirrhosis Patients were treated in the early stage of the disease Process, they can have a chance to carry their daily lives with prescribed medical and nursing regimens. Each patient has different health beliefs that there is a different Sick Role Behavior in the process of treatment. In order to increase and control the desired patient's Sick Role Behavior, it is important for nurses to understand the health beliefs influencing Sick Role Behavior. The purpose of this study was to determine factors influencing Sick Role Behavior and provide objective and scientific data to health education, treatment and nursing care. The subjects for this study were 80 Liver Cirrhosis patients selected from in and out patients of the medical department of four University Hospitals in Seoul, Won Joo and Mok Po city. Data was collected from Sep. 18, to Oct. 15, 1984. The measurement tool was the questionaire that developed by the investigator from the literature review based on Health Belief Model. The data Collection was done by interview. Analysis of data was done by use Mean, S.D., ANOVA, Pearson Correlation Coefficient and Stepwise Multiple Regression. The result of study were as follows: 1. The significant influencing variables on the Liver Cirrhosis Patient's Sick Role Behavior in general characteristics were Sex, Marital Status, Educational levels, Family's income and Duration after diagnosis. 2. Between the Sick Role Behavior and Health Belief Model, a) The first hypothesis that the stronger degree of Health Motivation, the higher degree of Liver Cirrhosis Patient's Sick Hole Behavior was supported (r=0.7892, p=0.0000). b) The second hypothesis that the higher degree of perceived susceptibility, the higher degree of Liver Cirrhosis Patients' Sick Role Behavior was supported (r=0.6383, p=0.0000) c) The third hypothesis that the higher degree of perceived severity, the higher degree of Liver Cirrhosis Patients' Sick Role Behavior was supported (r=0.5869, p=0.0000). d) The fourth hypothesis that the higher degree of perceived benefit, the higher degree of Liver Cirrhosis patient's Sick Role Behavior was supported (r=0.7535, p=0.0000). e) The fifth hypothesis that the lower degree of perceived barrier, the higher degree of Liver Cirrhosis Patient's Sick Role Behavior was supported(r=-9.7709, p=0.0000) f) The sixth hypothesis that the higher degree of knowledge in Disease, the higher degree of Liver Cirrhosis patients'lck Role Behavior was supported (r=0.7538, p=0.0000), g) In the correlation among variables, it was found positive correlation except that perceived barrier was negatively correlated. In the Stepwise Multiple Regression and Independent Variables, the factor“Health Motivation”could account for Sick Role Behavior in 62.28% of the Sample (F=128. 786, p<0.01). When the factor“perceived barrier”is added to this, it account for 70.38% of Sick Role Behavior (F=93.479, p <0.01) and the factor“knowledge in disease”is also included, it account for 74.78% of Sick Role Behavior (F=75.131, p <0.01). Finally, when the factor“perceived susceptibility”is included, it account for 75.03% of Sick Role Behavior (F=56.329, p <0.01).

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.299-303
• /
• 2008

A thermally cross-linkable polymer, poly[(2,5-dimethoxy-1,4-phenylenevinylene)-alt-(1,4-phenylenevinylene)] (Cross-PPV), was synthesized by the Heck coupling reaction. In order for the polymer to be cross-linkable, 20 mol% excess divinylbenzene was added. The chemical structure of Cross-PPV and thermally crosslinked Cross-PPV were confirmed by FT-IR spectroscopy. From the FT-IR, UV-Vis, and PL spectral data, thermally crosslinked Cross-PPV was insoluble in common organic solvents. The HOMO and LUMO energy level of thermally cross-linked Cross-PPV were estimated -5.11 and -2.56 eV, respectively, which were determined by the cyclic voltammetry and UV-Vis spectroscopy. From the energy level data, one can easily notice that thermally crosslinked Cross-PPV can be used for hole injection layer effectively. Bilayer structured device (ITO/crosslinked Cross-PPV/PM-PPV/Al) was fabricated using poly(1,4-phenylenevinylene-(4-dicyanomethylene-4H-pyran)-2,6-vinylene-1,4-phenylenevinylene-2,5-bis(dodecyloxy)-1,4-phenylenevinylene (PM-PPV) as the emitting layer, which have HOMO and LUMO energy levels of -5.44 eV and -3.48 eV, respectively. The bilayered device had much enhanced the maximum efficiency (0.024 cd/A) and luminescence ($45cd/m^2$) than those of a single layer device (ITO/PM-PPV/Al, 0.003 cd/A, $3cd/m^2$). The enhanced performance originated from that fact that cross-linked Cross-PPV facilitatse the hole injection to the emissive layer and the injected hole and electron from ITO and Al are recombined in emitting layer (PM-PPV) effectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.249-249
• /
• 2012

최근 주목받고 있는 Flexible Organic Light Emitting Diode (OLED) display에서는 Flexible 특성이 요구된다. 이는 현재 쓰이는 유리기판 대신 플라스틱기판으로 만들어야 가능하다. 하지만 플라스틱기판은 구성물질로 유기물을 사용하므로 수분과 산소의 투과에 매우 취약하다. 이는 장시간 사용 시 기판 위에 제작된 소자성능저하를 야기하는 등의 소자 신뢰도에 치명적 결함을 갖게 하는 원인이 된다. 따라서 기판 위의 소자를 보호할 수 있는 봉지기술 개발이 필요한데 가장 잘 알려진 플라스틱 기판에 적합한 Barrier기술로 유기물과 무기물을 교대로 적층하는 기술[1] 등이 있다. 본 연구에서는 PE-CVD 공정기술을 이용한 Flowable Oxide 박막과 ALD 공정기술을 이용한 Al2O3 무기물 박막을 적층하여 봉지박막을 구성하려 한다. Flowable Oxide는 저온공정이 가능하며 높은 증착속도와 뛰어난 Gap fill 특성을 가지고 있는데 이는 플라스틱기판의 엉성한 분자구조를 치밀하게 만들 것으로 예상되며 표면의 Pin-hole 또한 쉽게 채우는 특성이 있다. 실험은 Polyethylene Naphthalate (PEN) film 위에 PE-CVD 공정을 이용하여 Flowable Oxide를 증착하고, 그 후에 ALD 공정을 이용하여 Al2O3을 적층한 것을 하나의 샘플로 하였다. 샘플의 분석은 Ca test를 이용한 Water Vapor Transmission rate(WVTR)과 FT-IR, FE-SEM을 이용하여 분석하였다. FT-IR로 박막의 구성요소를 확인 하고 FE-SEM으로 박막의 Cross section image를 얻을 수 있었으며 또한 $4.85{\times}10^{-5}g/m^2$ day의 초기 WVTR 값을 얻을 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.290.2-290.2
• /
• 2016

Recently, organic thin-film transistors have been widely researched for organic light-emitting diode panels, memory devices, logic circuits for flexible display because of its virtue of mechanical flexibility, low fabrication cost, low process temperature, and large area production. In order to achieve high performance OTFTs, increase in accumulation carrier mobility is a critical factor. Post-fabrication thermal annealing process has been known as one of the methods to achieve this by improving the crystal quality of organic semiconductor materials In this paper, we researched the properties of pentacene films with X-Ray Diffraction (XRD) and Atomic Force Microscope (AFM) analyses as different annealing temperature in N2 ambient. Electrical characterization of the pentacene based thin film transistor was also conducted by transfer length method (TLM) with different annealing temperature in Al- and Ti-pentacene junctions to confirm the Fermi level pinning phenomenon. For Al- and Ti-pentacene junctions, is was found that as the surface quality of the pentacene films changed as annealing temperature increased, the hole-barrier height (h-BH) that were controlled by Fermi level pinning were effectively reduced.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1438-1439
• /
• 2011

In this paper, we studied effects on the efficiency, according to thickness of the electron injection layer(EIL) for improving efficiency of Organic Light Emitting Diodes(OLEDs). For the first time, after confirming the optimum thickness of the EIL material $Cs_2CO_3$, we designed OLED devices having a structure of ITO/TPD/$Alq_3/Cs_2CO_3$/Al. And we manufactured devices applying for the optimum thickness of the material in the simulation with thermal evaporating method. And we investigated how the EIL material $Cs_2CO_3$ effects on efficiency of OLEDs in the EIL. As the result, because the EIL material $Cs_2CO_3$ reduces energy potential barrier of the EIL, it facilitated the electron transfer. And, as blocking the hole transfer contributes to an increased recombination, we confirmed that the efficiency of OLEDs increased. And compared to the device without using the EIL material, the device using thickness 1.0 nm of $Cs_2CO_3$ in the EIL shows the excellent efficiency. Therefore, we confirmed that the luminance and the external quantum efficiency increase about 600% and 500% respectively.

• ETRI Journal
• /
• v.18 no.4
• /
• pp.315-338
• /
• 1997

We extend our previous theoretical analysis of electronic and optical properties of p-type quantum well structures based on the two heavy- and light-hole system to include all the three valence bands. These theories are then used to clarify the origin of the normal incidence absorption and photo current at photon wavelengths of 2 - 3 ${\mu}m$, which was observed in addition to the absorption around 8 ${\mu}m$ by a recent experimental investigation with heavily doped p-type GaAs/AlGaAs multi-quantum well (MQW) structures. In the theoretical analysis, the Hartree and exchange-correlation many-body interactions are taken into account within one-particle local density approximation, and it is shown that normal incidence absorption occurs in two wavelength regions over the transition energy range higher than barrier height for p-type GaAs/AlGaAs superlattices with well doping of $2{\times}10^{19}\;cm^{-3}$; one region has broad absorption peaks with coefficients of about 5000 $cm^{-1}$ around 8 ${\mu}m$, and the other has two rather sharp peaks at 2.7 ${\mu}m$ and 3.4 ${\mu}m$ with 1800 $cm^{-1}$ and 1300 $cm^{-1}$, respectively. The result indicates that the theory explains the experimental observation well, as the theoretical and experimental results are in close agreement in general absorption features.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1270-1271
• /
• 2008

Effects of thin ZnO/Mg interlayers on electrical and optical properties between p-GaN and ITO were characterized for its application to GaN-LEDs. The ZnO and Mg layers were deposited to have various thicknesses (1${\sim}$6nm for ZnO and 1${\sim}$2nm for Mg) by sputtering. After RTA process, the atomic migration between Mg and ZnO and the formation of Ga vacancy were observed from SIMS depth profile, resulting in the increase of hole concentration and the reduction of band bending at the surface region of p-GaN. The sample using ZnO(2nm)/Mg(2nm) interlayer produced the lowest contact resistance with SBH(Schottky barrier height) of 0.576 eV and the transmittance higher than 83% at a wavelength of 460nm when annealed at 500$^{\circ}C$ for 3min in air ambient.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.198.2-198.2
• /
• 2014

We investigated change of the electronic structure, chemical states and elements ratio in graphene film by using photoelectron spectroscopy (PES). The graphene electrode has attracted considerable interest due to its possible applications in flexible organic light emitting diodes (F-OLEDs). However, to use the graphene for OLEDs, sufficient increase of work function is required, that is related with hole injection barrier. Plasma treatment is one of the most widely used method in OLEDs to increase the work function of the anode such as indium tin oxide (ITO). In this work, we used the plasma treatment, which is generated by various gas types such as O2, and Ar to increase the work function of the graphene film. From these results, we discuss the relation among the change of work function, plasma power, plasma treatment time and gas types.