• 대한한방내과학회지
• /
• 제22권2호
• /
• pp.199-205
• /
• 2001

Background and Purpose : Transcranial doppler ultrasonography(TCD) is a noninvasive and nonradioactive technique for evaluation of the hemodynamics in large cerebral vessels. Sahyangsohap-won(SS) has been considered to be effective for the treatment of various disease, especially cerebrovascular, cardiovascular, and psychosomatoform disorders. But, there is no study about the effect of SS on the cerebral hemodynamics in humans. The aim of this study was to assess the effect of SS on the changes in cerebral hemodynamics and the dose-dependant effect by using TCD. Subjects and Methods : 30 healthy subjects were randomly divided into three group: group 1 took no drug, group 2 took SS one pill, and group 3 took SS 2 pills. Changes in the mean blood flow velocity(MBFV) and pulsatility index(PI) in the middle cerebral artery were evaluated by means of TCD. We obtained hypercapnia with breath-holding and evaluated cerebrovascular reactivity with the breath-holding index(BHI). Systolic blood pressure(SBP), diastolic blood pressure(DBP), and heart rate(HR) were measured by means of ambulatory blood pressure monitoring. In group 2 and group 3, the evaluations were performed during the baseline and were repeated at 20, 40, and 60 minutes after SS administration. In group 1, the evaluation was performed at corresponding time intervals. Results : In mean values of MSFV, PI, SSP, DBP, and HR, no stastically significant differences were found between the 3 groups. However, BHI values were significantly lower in groups 2 and 3 than in group 1 at 40 minutes after SS administration(P<0.05, group 1 vs group 2, group 1 vs group 3 by post-hoc analysis: Scheffe's test) but in dose-dependant effect, there was no difference between group 2 and group 3. Conclusion : These results suggest that SS can decrease vascular resistance in cerebral small arteries or arterioles and enhance their distensibility. Further studies on larger numbers of subjects are needed to confirm these effects and the dose-dependant effects.

• 동양고전연구
• /
• 제35호
• /
• pp.243-274
• /
• 2009

본 연구에서는 "중용"의 내용을 중심으로 천인심성합일(天人心性合一)의 수양론(修養論)을 다루었다. 먼저 천인합일(天人合一)에 관하여 보면, "중용"에서는 천도(天道)의 의미를 중용(中庸), 성(誠), 성(性), 성(聖), 달도(達道), 도심(道心) 등으로 보고 있고, 인도(人道)의 의미를 중화(中和), 성지(誠之), 유(俗), 도(道), 교(敎), 달덕(達德), 인심(人心) 등으로 보고 있다. 천도는 우주의 생성, 운동법칙이며 이러한 천도는 사람에게 性을 부여한다. 이러한 천도를 이루기 위해서 인간이 마땅히 행해야만 하는 것이 인도이며, 사람이 인도를 수행하는 과정에서 인도와 천도는 합일된다. 다음으로, 심성합일(心性合一)에 관하여 보면, 이는 중화(中和)의 개념을 통하여 설명되는데, 사람이 마음을 바로 하여 정(情)을 올바로 발휘하는 것이 곧 성(性)과 합일이 됨을 말하는 것이다. 이와 같은 천인심성합일이 이루어지면 나타나는 그 공효는 수신이 기본이 된 구경(九經)으로 온천하가 다스려지는 것으로 설명할 수 있다. 천도와 인도의 관계 및 심과 성의 관계는 오달도 삼달덕 등 성(性)과 도(道), 교(敎)와의 관계로 설명되고, 구체적으로는 수신(修身)-사친(事親)-지인(知人)-지천(知天)의 관계로 설명되며 또한 도심(道心)과 인심(人心), 중화(中和)를 통한 심성의 합일로 설명된다. 그런데 천도와 인도의 합일, 심과 성의 합일을 이루기 위해서는 사람의 수양을 통하여 가능하다. 그 방법은 존심(存心)과 치지(致知)로 대표될 수 있고, 또한 신독(愼獨)과 계신공구(戒愼恐懼)를 통한 시중(時中), 충서(忠恕)와 택선고집(擇善固執)과, 심성합일(心性合一)의 방법으로 치중화(致中和)가 있다.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.33-46
• /
• 1997

The location decision problem for distribution center is one of the most important problem in business logistics system. Because the proportion of holding and transportation cost to physical distribution cost in our country exceed the 60%, a corporation must feel strong pressure to investigate the location problem for distribution center. This paper presents an algorithm for determining the best location of distribution center in consideration with physical distribution cost, demand, and customer location. The methods of determining the distribution center location is that firstly many of proposed sites are built up where demand position is distributed, and then optimal location of distribution center is selected.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.242-245
• /
• 2002

Authentication protocol as a part of security system has been growth rapidly since it was known that sending clear text password in the network is unsecured. Many protocols could be noted proposed to strengthen the authentication process. In 1985 an attempt to safeguard network services within Athena project resulting on the born of Kerberos 〔1〕〔8〕, one of the protocol that has a lot of attention from the research community. Several years later researchers were discovered some weaknesses carried by this protocol 〔2〕〔21〕. In 1992. EKE was introduced by Bellovin and Merrit. Since that time, many protocols introduced could be considered as its variant 〔5〕〔9〕〔13〕〔14〕. Some other protocols such as OKE〔5〕 and SRP〔18〕 although claimed different from EKE, they have the same basic mechanism in holding authentication process. Here, we explain the mechanism of those protocols, their strength and their weaknesses and shortcomings. Due to the limitations of the number of paper pages, only two types of authentication protocol can be explained here i.e EKE and SRP.

• 소성∙가공
• /
• 제18권7호
• /
• pp.513-518
• /
• 2009

Large load is required in forging of large-scale components which becomes a critical restriction in practice. In the present study, two methods of incremental forging were investigated for the purpose of reducing the load required for forging of large and thick plates. The forging was applied primarily to obtain fine grains by imposing large amount of plastic deformation to the plates. One was to use nine strokes with a flat die and the other was to use three strokes with a curved die. The die moves vertically in the former while it moves vertically as well as rolls horizontally in the latter. Deformation of the slab in each case was analyzed by rigid-plastic finite element method and as a result, variations of load and slab holding force, and distributions of effective strain and thickness were predicted.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2003년도 춘계학술발표논문집 (중)
• /
• pp.967-970
• /
• 2003

본 논문에서는 멀티미디어 게임 흡인요소를 매개로 유식학 수행단계와 행동수정방법간의 연관성을 밝혔다. 수행단계와 흡인요소간의 연관성 파악을 위하여 11가지 선심소를 기저범주로 놓고 Roget 시소러스를 이용하여 참조정보를 탐색한 곁과 선심소의 상세범주를 얻었다. 이것과 함께 게임 흡인요소 분류를 Roget 시소러스에서 같은 방법으로 탐색하여 수행단계와 게임 흡인요소의 대응관계를 확인하였다. 한편, 게임 흡인요소에 대응하는 행동수정방법은 문헌연구를 통하여 확인하였다. 이로써 게임 흡인요소 악영향 순화방안을 서구의 심리학이론인 행동수정방법과 함께 불친 심리학인 유식학 이론의 수행방법을 적용하여 상호보완적으로 생각할 수 있었다.

• 한국시뮬레이션학회논문지
• /
• 제3권2호
• /
• pp.27-36
• /
• 1994

In many real-world simulation studies the several measures of performance are of interest simultaneously. There exist very limited number of studies that explain and suggest the methods or procedures of inferencing the system performances at the same time. This study presents a procedure for determining the number of simulation observations required to achieve the prespecified confidence level for several measures of system performance. Mean values are selected as the measures, for instance, expected ordering cost, expected holding cost, and expected shortage cost for a given period of time in the study of inventory problems. Basically, the batch means approach is applied and extended to develop an algorithm to carry out the procedure handling more than single parameter. The efficacy of the presented method is assessed through the experiments. The empirical results based on some stochastic systems such as queues and inventory problems show that the suggested method produces as excellent result in terms of the precision of estimated means and the number of observations required.

• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.92-97
• /
• 2006

This paper presents the characteristic analysis and the optimal design of a permanent magnetic actuator (PMA) for a vacuum circuit breaker (VCB) using a two-dimensional finite element analysis. The purpose of this research about a PMA is to minimize the breaking time and the volume of the permanent magnet within the limits of the holding force and maximum current in the coil. The conjugate gradient method is used as an optimization algorithm. The node moving technique is iteratively implemented until the design variables of the PMA are optimized. In this paper, the optimal design of a PMA is accomplished to improve the conventional design methods.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.94-101
• /
• 2013

Injection molding process is one of the most important methods to produce plastic parts with high efficiency and low cost. The objective of this study is to implement the best plastic injection molding process for LED TV speaker frame. Moldflow analysis and simulation of plastic injection molding process were carried out in order to predict optimal modeling operation conditions and then injection molded part was produced various type of resin temperature, filling time and injection pressure variation. the result was that the best injection molding condition is set as 60bar pressure, 2sec filling time and $310^{\circ}C$ degree. The study result would be useful to variety of plastic injection molding process.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.7-13
• /
• 2007

This study proposes a new screw measurement system that is capable of measuring the pitch or lead of a screw, which is one of the most important parameters representing the screw quality. There are various conventional methods for screw measurement including some mechanical and optical ones, but they can not be applied to measure the lead except the profiles or sizes. The newly suggested method is able to measure the pitch or lead directly. This is executed by scanning the thread with a digital probe while the target screw rotates. The devised measurement system is a integrated computer system which is composed of a stepping motor, a digital linear gauge and a chuck device for holding the measured screw. In order to operate the system effectively and conveniently, a computer program having graphical user interface facility is developed. Some experiments were done to prove the effectiveness of the system.