• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2008년도 국제학술회의
• /
• pp.183-190
• /
• 2008

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2008년도 국제학술회의
• /
• pp.279-285
• /
• 2008

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.133-134
• /
• 2009

Cold temperature development (CTD) of electron beam (EB) patterned resists and subsequent dry etching were investigated for fabrication of nano-patterned Niobium (Nb). Bulky Nb fims on GaAs substrates were deposited with EB evaporation. Line patterns on Nb cathode were fabricated by EB patterning and reactive ion etching (RIE). Size deviations of nano-sized line patterns from CAD designed patterns are dependent on the EB total exposure, but it can be improved by CTD of EB-exposed resist. Line patterns of 10 to 300 nm widths of EB-exposed resist patterns were drawn under various exposure conditions of $0.2{\mu}s$/dot (total 240,000 dot) with a constant current (50 pA). Compared with room temperature development (RTD), the CTD improves pattern resolution due to the suppression of backscattering effect. RIE with $CF_4$ was performed for formation of several nano-sized line patterns on Nb. Each EB-resist patterned samples with RTDs and CTDs were etched with two different $CF_4$ gas pressures of 5 Pa. Nb etching rate increases while GaAs (or ZEP) etching rate decreases as the chamber pressure increases. This different dependent of the etching rate on the $CF_4$ pressure between Nb and GaAs (or ZEP) has a significant meaning because selective etching of nano-sized Nb line patterns is possible without etching of the underlying active layer.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.140-147
• /
• 2004

High temperature oxidation of Fe-19Cr and Fe-19Cr-0.2Ti alloys is studied at 1173-1373 K in 16.5 kPa $O_2$ - balances $N_2$ atmosphere aimed at clarifying the effect of titanium addition. Oxidation rate of Fe-19Cr alloy was accelerated with titanium. For both alloys chromium rich $(Fe,\;Cr)_2O_3$ was formed as a major oxidation product. On Fe-19Cr-0.2Ti alloy, a thin layer composed of spinel type oxide and titanium oxide was also formed and an internal oxidation of titanium was observed. Titanium was concentrated at the oxide surface and internal oxidation zone but a small amount of titanium was also found in the intermediate corundum type $(Fe,\;Cr)_2O_3$ layer. Crystals of corundum type $(Fe,\;Cr)_2O_3$ formed on Fe-19Cr alloy are coarse but that formed on Fe-19Cr -0.2Ti alloys were fine and columnar. Reason for the difference in oxidation kinetics and crystal structure will be discussed relating to the distribution of aliovalent titanium in corundum type $(Fe,\;Cr)_2O_3$ oxide layer.

• Journal of Gastric Cancer
• /
• 제22권1호
• /
• pp.47-55
• /
• 2022

Purpose: The use of direct oral Xa inhibitors (DXaIs) to prevent venothrombotic events is increasing. However, gastrointestinal bleeding, including that related to endoscopic resection, is a concern. In this study, we evaluated bleeding and coagulation times during the perioperative period of gastric endoscopic submucosal dissection (ESD). Materials and Methods: Patients who consecutively underwent gastric ESD from August 2016 to December 2018 were analyzed. Bleeding rates were compared among the 3 groups (antiplatelet, DXaIs, and control). DXaI administration was discontinued on the day of the procedure. Prothrombin time (PT), activated partial thromboplastin time, and the ratio of inhibited thrombin generation (RITG), which was based on dilute PT, were determined before and after ESD. Results: During the study period, 265 gastric ESDs were performed in 239 patients, where 23 and 50 patients received DXaIs and antiplatelets, respectively. Delayed bleeding occurred in 17 patients (7.4%) and 21 lesions (7.1%). The bleeding rate in the DXaI group was significantly higher than that in the other groups (30.4%, P<0.01), and the adjusted odds ratio of bleeding was 5.7 (95% confidence interval, 1.4-23.7; P=0.016). In patients using DXaIs, there was a significant (P=0.046) difference in the median RITG between bleeding cases (18.6%) and non-bleeding cases (3.8%). Conclusions: A one-day cessation of DXaIs was related to a high incidence of bleeding after gastric ESD, and monitoring of residual coagulation activity at trough levels might enable the predicted risk of delayed bleeding in patients using DXaIs.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제23권2호
• /
• pp.111-116
• /
• 2023

We provided general anesthesia management to a patient with advanced atrioventricular block, which was discovered in the remote period after open-heart surgery. A 21-year-old man with Noonan syndrome was scheduled to undergo excision of a median intramandibular tumor. At 2 months of age, the patient underwent endocardial repair for congenital heart disease. During our preoperative examination, an atrioventricular block was detected, which had not been previously noted. Emergency drugs were administered, and a transcutaneous pacemaker was placed. During anesthesia induction, mask ventilation was easy, and intubation was performed smoothly using a video laryngoscope. The transcutaneous pacemaker was activated in demand mode at a pacing rate of 50 cycles/min approximately throughout the anesthesia time, and the hemodynamic status remained stable. The effect of intraoperatively administered atropine was brief, lasting only a few seconds. Although body movements due to thoracoabdominal muscle spasm were observed during pacemaker activation, they did not interfere with surgery. In postoperative patients with congenital heart disease, an atrioventricular block may be identified in the remote period, and preoperative evaluation should be based on this possibility. In addition, during anesthesia management, it is important to prepare multiple measures to maintain hemodynamic status.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.340-343
• /
• 2008

The Soya Warm Current (SWC) is a coastal boundary current, which flows along the coast of Hokkaido in the Sea of Okhotsk. Seasonal and subinertial variations in the SWC are investigated using data obtained by high-frequency (HF) ocean radars, coastal tide gauges, and a bottom-mounted acoustic Doppler current profiler (ADCP). The HF radars clearly capture the seasonal variations in the surface current fields of the SWC. The velocity of the SWC reaches its maximum, approximately 1 m/s, in the summer, and becomes weaker in the winter. The velocity core is located 20 to 30 km from the coast, and its width is approximately 50 km. The almost same seasonal cycle was repeated in the period from August 2003 to March 2007. In addition to the annual variation, the SWC exhibits subinertial variations with a period from 10-15 days. The surface transport by the SWC shows a significant correlation with the sea level difference between the Sea of Japan and Sea of Okhotsk for both of the seasonal and subinertial variations, indicating that the SWC is driven by the sea level difference between the two seas. Generation mechanism of the subinertial variation is discussed using wind data from the European Centre for Medium-range Weather Forecasts (ECMWF) analyses. The subinertial variations in the SWC are significantly correlated with the meridional wind component over the region. The subinertial variations in the sea level difference and surface current delay from the meridional wind variations for one or two days. Continental shelf waves triggered by the meridional wind on the east coast of Sakhalin and west coast of Hokkaido are considered to be a possible generation mechanism for the subinertial variations in the SWC.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.797-802
• /
• 1996

Hydrogenated amorphous silicon carbide (a-SiC:H) films have been deposited on unheated substrates by low frequency (50Hz) plasma using $SiH_4+CH_4+H_2$ gas mixtures. Deposition rate, refractive index, optical band gap, Vickers hardness and IR spectrum of the deposited a -SiC:H films have been measured for various rations of gas flow rates k(=$CH_4/SiH_4$, 0.5k4) with a constant $H_2$ flow rate (100sccm). As k increases, the deposition rate of the a-SiC:H films increases up to the maximum value of about 220nm/h at k=2.5, and then it decreases. The refractive index of the films was 2.6 for k=2.5, while the optical band gap of the films was 3.3eV for k=2.2. The maximum value of Vickers hardness of the films was 1500Hv at k=1. The infrared transmission measurement shows that the films contain both Si-C and Si-$CH_3$ bonds.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 1999년도 임시총회 및 추계 학술발표회
• /
• pp.74.1-74
• /
• 1999

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2001년도 춘계 공동학술발표회
• /
• pp.238-239
• /
• 2001