• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1171-1177
• /
• 2011

A high power laser beam focused on a small area accelerates a thin material that flies and hits other target material in which a shock wave may be induced. This laser induced shock experimental method is more repeatable and cheaper but worse than other experimental method using gas gun or other apparatus. An optical system including a phase zone plate reduces the interference and also makes the focused-beam-intensity distribution uniform. We wrote a computer code that calculates light ray traces. Using the code we designed and fabricated an optical system including a phase zone plate and improved the laser-beam uniformity. We introduce preliminary experimental results of laser induced shock of the samples such as aluminum and other materials.

• Journal of Chest Surgery
• /
• v.48 no.1
• /
• pp.74-77
• /
• 2015

Chylothorax is a rare postoperative complication of a thoracic surgical procedure. Here, we report a case of chylothorax after thoracic endovascular aortic repair with debranching for the distal arch aneurysm of the aorta. First, the patient was treated by a medical method (nil per os, fat-free diet, and octreotide), but this method failed. The patient strongly refused surgical treatment. Therefore, we tried to occlude the thoracic duct by lymphangiography Lipiodol, and this line of treatment was successful.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.487-488
• /
• 2005

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.587-590
• /
• 2005

A detailed geothermal characteristics survey with numerical simulations of the heat transfer in a site for ground source heat pump system is necessary for deploying a shallow geothermal utilization system. Density, specific heat, thermal diffusivity, and thermal conductivity are measured on 91 core samples from a 300 m deep borehole in KIGAM(Korea Institute of Geoscience and Mineral Resources). The heat flow is estimated from the thermal gradient and average thermal conductivity and the correlation between fracture system and hydraulic conductivity is analyzed. From the obtained ground information of the study site the performance of the ground heat pump system can be analyzed with some detailed numerical simulations for seasonal heat pump operation skill and optimal system design techniques.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.9-12
• /
• 2003

Brushless do motors have been replacing brush type motors in machine tool and robotics applications over the last number of years This Paper deals with the design and application of the slot-less permanent magnet synchronous motor (PMSM). The slot-less PMSM eliminates rotational cogging torque due to permanent magnet preferred positions decreases core loss and thus increases efficiency, provides excellent torque-to-volume and power-to-volume ratios, and has a linear current versus torque relation. The PMSM with slot-less stator is designed and manufactured, which will be used for high speed and high efficiency application such a medical instruments.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.118-125
• /
• 1995

This paper presents the result of a computational study on the wake characteristics of two tanker models. i.e HSVA and DYNE hull forms. The focus of the study is on the distributions of axial. radial and tangential velocities of the two hull forms in way of the propeller, especially over the propeller disk. The effect of bilge vortices on the velocity distribution is also concerned. For the computation of stern and wake flows of the two hull forms. the incompressible Reynolds-Averaged Navier-Stokes(RANS) equations are numerically solved by the use of a second order finite difference method, which employs a four stage Runge-Kutta scheme with a residual averaging technique and the Baldwin-Lomax model. The calculated pressure distributions on the hull surface and the axial. radial and tangential velocity distributions over the propeller disk are presented for the two hull forms. Finally, the result of wake analysis for the computed wake distribution over the propeller disk is given in comparison with those for the experimental wake distribution for the both hull forms.

• Natural Product Sciences
• /
• v.7 no.2
• /
• pp.60-62
• /
• 2001

Ulmus davidiana, Formitella fraxinea, and Aloe vera extracts were detected to have inhibitory effects against topoisomerase I at treatment of $5{\mu}g$. Ulmus davidiana and Aloe vera extracts were found to show inhibitory effect similar to camptothecin, Formitella fraxinea extract was found to have weak activity. We also found the potential use of those extracts as a radiation sensitizer. Radiosensitizing effect at combination treatment was increased more than 2 times at single treatment of radiation, Ulmus davidiana or Formitella fraxinea extracts. Ulmus davidiana and Formitella fraxinea extracts were found to have significant radiosensitizing effect on test tumor cell line. But, Aloe vera extract was not detected to have activity as a radiosensitizer. Ulmus davidiana and Formitella fraxinea extracts are potent radiosensitizers on tumor cell lines and should be considered for further study of active compounds.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.1
• /
• pp.63-73
• /
• 1990

Low cost automatic welding machine is developed for the purpose of welding process automation of automobile parts with two dimensional welding joints. Developed gantry type machine is equipped with X, Y and roll axis stepping motors, and dirive units units are designed by two phase on drive scheme using shift registers. Control system is constructed by single board microcomputer of Z80A CPU, and also it is equipped with parallel input output ports and counter-timer chips. Linear and circular interpolation of welding head movement is accomplished by employing software digital differential analyzers. It has been shown that contour error of develped system is withi ${\pm}1.0mm$, meaning that the machine is suitable for CO2 arc welding process of automoble parts and is expected it's application to industry.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1961-1962
• /
• 2008

Hybrid Peer-to-Peer structure is sharing resource in each peer, but various resource that is with go peer indexing and segment that search from attained in server who function is solidified that is not attained in peer itself be. Basis algorithm was based on Ethernet protocol and administration of each peer enabled in center server and peer does as can confirm breakdown existence and nonexistence through communication with center server and the internet through this directly expensive test expense and a lot of test times of existing test method of access method necessary problem effectively improve.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.91-95
• /
• 2005

A heat dissipation modeling method of EEE parts is developed for thermal design and analysis of an satellite electronic equipment. The power consumption measurement value of each functional breadboard is used for the heat dissipation modeling method. For the purpose of conduction heat transfer modeling of EEE parts, surface heat model using very thin ignorable thermal plates is developed instead of conventional lumped capacity nodes. The thermal plates are projected to the printed circuit board and can be modeled and modified easily by numerically preprocessing programs according to design changes. These modeling methods are applied to the thermal design and analysis of CTU and verified by thermal cycling and vacuum tests.