• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.304-311
• /
• 1998

An algorithm to enhance spectra matching of acceleration time history used in the seismic analysis of nuclear power plants(NPP) is proposed. The new scheme provides the solution on the highly fluctuating and over conservatism problems that happened in order to satisfy design spectrum enveloping criteria in the traditional method. To obtain optimized spectrum for a time history, a spectrum matching procedure that adapts a system identification technique is also developed. The algorithm also introduces maximum displacement control, baseline correction, clipping and raising of maximum peak of time history, and power spectral density (PSD) control of time history. It is verified through numerical examples that this new scheme can definitely generate acceleration time history, closely matching the target spectra and satisfying other stipulated requirements.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2014년도 춘계 종합학술대회 논문집
• /
• pp.239-240
• /
• 2014

Researchers in KISTI have been participating in the WISET Fellow Mentoring program since 2009 [1]. We describe the history and future of WISET Fellow Mentoring program from KISTI. We have communicated with mentees more freely and effectively using complementary online and offline system. In addition, we designed a automated matching process in order to help mentors and mentees to begin mentoring with satisfaction [2-6]. In the future, we plan to use our automated matching process for matching candidate mentors and mentees in order to obtain more satisfaction in mentoring.

• 한국가스학회지
• /
• 제24권4호
• /
• pp.62-72
• /
• 2020

본 연구에서는 캐나다 혼리버(Horn-River) 분지를 대상으로 셰일가스 저류층의 신뢰성 있는 생산성 평가와 미래 생산량 예측을 위한 효율적인 이력검증(history matching) 방법을 제안하였다. 이를 위해 셰일가스 저류층의 물성인자가 생산성에 미치는 영향을 분석하기 위한 민감도 분석을 수행하였으며, 그 결과를 바탕으로 저류층 물성인자를 4가지 case로 분류하여 이력검증의 목적함수로 활용하였다. 이력검증 이후 추가 취득된 약 3년간의 생산 자료를 포함하여 맹검시험(blind test)을 수행한 결과, Case 1(모든 물성인자)은 7.67%, Case 2(생산 영향인자)는 7.13%, Case 3(제어 가능 물성인자)는 17.54%, Case 4(제어 불가능 물성인자)는 10.04%의 생산량 오차율이 나타났다. 이는 이력검증을 수행한 초기 4년간의 생산 자료의 경우에는 모든 물성인자를 고려한 생산예측이 효과적이나, 향후 생산량 예측을 함에 있어 Case 2와 같이 생산성에 대해 민감도가 높은 물성인자를 고려할 때 가장 높은 신뢰도가 나타남을 의미한다. 가장 높은 신뢰도를 갖는 Case 2 모델을 이용해서 예측한 셰일가스 저류층 생산정의 긍극가채매장량은 2030년 12월 기준 약 17.24 Bcf이며, 원시부존량 대비 회수율은 약 32.2%이다.

• 한국지진공학회논문집
• /
• 제25권1호
• /
• pp.43-52
• /
• 2021

According to several seismic design standards, a ground motion time history should be selected similar to the design response spectrum, or a ground motion time history should be modified by matching procedure to the design response spectrum through the time-domain method. For the response spectrum matching procedure, appropriate seed ground motions need to be selected to maintain recorded earthquake accelerogram characteristics. However, there are no specific criteria for selecting the seed ground motions for applying this methodology. In this study, the characteristics of ground motion time histories between seed motions and spectral matched motions were compared. Intensity measures used in the design were compared, and their change by spectral matching procedure was quantified. In addition, the seed ground motion sets were determined according to the response spectrum shape, and these sets analyzed the response of nonlinear and equivalent linear single degrees of freedom systems to present the seed motion selection conditions for spectral matching. As a result, several considerations for applying the time domain spectral matching method were presented.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1467-1469
• /
• 2003

Image matching is fundamental process to identify conjugate points on the stereo images. However, standard methods or general solutions for matching problem have not been found yet, in spite of long history. Quality of the matching basically depends on uniqueness of the matching entity and robustness of the algorithm. In this study, conjugate points were extracted by implementing interest operator, then area based matching method was applied to the topographical characteristics of the gray value as the matching entities. The matching entities were utilized based on the concept of the intrinsic image.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권3호
• /
• pp.51-64
• /
• 2015

In the present study, we develop two history matching techniques based on Markov chain Monte Carlo method where radial basis function and Gaussian distribution generated by unconditional geostatistical simulation are employed as the random walk transition kernels. The Bayesian inverse methods for aquifer characterization as the developed models can be effectively applied to the condition even when the targeted information such as hydraulic conductivity is absent and there are transient hydraulic head records due to imposed stress at observation wells. The model which uses unconditional simulation as random walk transition kernel has advantage in that spatial statistics can be directly associated with the predictions. The model using radial basis function network shares the same advantages as the model with unconditional simulation, yet the radial basis function network based the model does not require external geostatistical techniques. Also, by employing radial basis function as transition kernel, multi-scale nested structures can be rigorously addressed. In the validations of the developed models, the overall predictabilities of both models are sound by showing high correlation coefficient between the reference and the predicted. In terms of the model performance, the model with radial basis function network has higher error reduction rate and computational efficiency than with unconditional geostatistical simulation.

• 한국가구학회지
• /
• 제20권6호
• /
• pp.605-611
• /
• 2009

This paper reports the application of radiocarbon wiggle matching for Korean wooden artifacts such as furniture and Buddhist statues for precise dating. Ten biannual samples of 20 years (AD 1249-1268) for AMS (accelerator mass spectrometry) radiocarbon measurements were prepared from a board of the pedestal for Buddhist statue at Jeongsusa (temple) in Kangwhado, Korea, which was dendrochronologically dated. The average 95.4% confidence interval of radiocarbon dating without wiggle matching was 123 year. When wiggle matching technique was applied, it became 37 year, 3.3 times smaller than that without wiggle matching. The results indicated that wiggle matching technique using the calibration curve for northern hemisphere (IntCal04: International radiocarbon calibration curve announced in 2004) can produce precise dates for Korean wooden artifacts which possess as much as 20 tree rings.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권5호
• /
• pp.56-67
• /
• 2012

In the present study, an enhanced subsurface prediction algorithm based on a non-parametric geostatistical model and a history matching technique through Gibbs sampler is developed and the iterative prediction improvement procedure is proposed. The developed model is applied to a simple two-dimensional synthetic case where domain is composed of three different hydrogeologic media with $500m{\times}40m$ scale. In the application, it is assumed that there are 4 independent pumping tests performed at different vertical interval and the history curves are acquired through numerical modeling. With two hypothetical borehole information and pumping test data, the proposed prediction model is applied iteratively and continuous improvements of the predictions with reduced uncertainties of the media distribution are observed. From the results and the qualitative/quantitative analysis, it is concluded that the proposed model is good for the subsurface prediction improvements where the history data is available as a supportive information. Once the proposed model be a matured technique, it is believed that the model can be applied to many groundwater, geothermal, gas and oil problems with conventional fluid flow simulators. However, the overall development is still in its preliminary step and further considerations needs to be incorporated to be a viable and practical prediction technique including multi-dimensional verifications, global optimization, etc. which have not been resolved in the present study.

• International journal of advanced smart convergence
• /
• 제1권2호
• /
• pp.39-42
• /
• 2012

This paper proposed a method that detects emergency situations in a video stream using MHI (Motion History Image) and template matching for a video-based intelligent security system. The proposed method creates a MHI of each human object through image processing technique such as background removing based on GMM (Gaussian Mixture Model), labeling and accumulating the foreground images, then the obtained MHI is compared with the existing MHI templates for detecting an emergency situation. To evaluate the proposed emergency detection method, a set of experiments on the dataset of video clips captured from a security camera has been conducted. And we successfully detected emergency situations using the proposed method. In addition, the implemented system also provides MMS (Multimedia Message Service) so that a security manager can deal with the emergency situation appropriately.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.125-137
• /
• 2006

Nowadays, many commercial CAD systems support history-based, constraint-based and feature-based modeling. Unfortunately, most systems fail during the re-evaluation phase when various kind of topological changes occur. This issue is known as "persistent naming" which refers to the problem of identifying entities in an initial parametric model and matching them in the re-evaluated model. Most works in this domain focus on the persistent naming of atomic entities such as vertices, edges or faces. But very few of them consider the persistent naming of aggregates like shells (any set of faces). We propose in this paper a complete framework for identifying and matching any kind of entities based on their underlying topology, and particularly shells. The identifying method is based on the invariant structure of each class of form features (a hierarchical structure of shells) and on its topological evolution (an historical structure of faces). The matching method compares the initial and the re-evaluated topological histories, and computes two measures of topological similarity between any couple of entities occurring in both models. The naming and matching method has been implemented and integrated in a prototype of commercial CAD Software (Topsolid).