• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.756-760
• /
• 2017

자동차 부품 업체에서는 납기 준수, 생산 원가 절감, 품질 관리 향상 등의 고객의 필수적인 요구 사항를 만족하기 위하여 자동화를 추진하고 있다. 현재의 수작업을 통한 육안 검사 공정에서는 이러한 필수 요구 사항을 만족하기에는 불가능하다. 따라서 본 연구에서는 품질 관리 개선을 위하여 도어 힌지 브라켓 부품에 대한 현재의 수작업 육안 검사 공정을 대체할 수 있는 자동 선별 시스템을 제안하고자 한다. 본 제안은 도어 힌지 브라켓 부품의 용접너트 누락 불량 발생을 방지하여 고객사의 검사 요구사항 등을 만족할 수 있도록 설계하였다. 검사 공정 알고리즘 및 유사 척도 매칭 알고리즘 프로그램을 자동 선별 시스템에 적용하여 정상 제품과 불량 제품을 구별할 수 있도록 하였다. 검사 공정 알고리즘 및 유사 척도 매칭 알고리즘의 검증 시험을 통하여 검출정확도 98%의 성공적인 검사 결과를 나타내었고 이를 생산 현장에 적용하여 불량 제품감소에 따른 생산성 향상에 기여하였다.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.88-92
• /
• 2017

풍력은 자원이 풍부하고, 끊임없이 재생되며, 공해물질 배출이 없어서 친환경적인 점에서 화석에너지 고갈 시에 대비한 유망한 대체 에너지원으로서 각광받는 에너지이다. 풍력발전기는 회전축의 방향에 따라 수평축 풍력발전기와 수직축 풍력발전기로 구분되며, 수직축은 발전효율이 낮은 단점이 있는 반면에 바람의 방향에 영향을 받지 않아 요잉 시스템이 필요가 없어 구조가 간단하고, 저 풍속에서도 풍력발전이 가능한 장점이 있어 현재 소형 수직축 풍력발전기가 주목받고 있다. 본 연구에서는 저 풍속에서도 발전 가능한 자이로밀형, 힌지형, 양문형의 블레이드 형태에 따른 소형 수직형 풍력발전기를 이용하여 1m/s~11m/s의 가변풍속에 따른 발전기의 출력전압 및 출력전류를 분석하였다. 연구결과 최대풍속 11m/s일 때 발전기 출력전압은 양문형 블레이드를 적용 시 자이로밀형 블레이드보다 67%, 힌지형 블레이드보다 9%가 증가되었으며, 발전기 출력전류는 양문형 블레이드를 적용 시 자이로밀형 블레이드보다 93%, 힌지형 블레이드보다 5%가 증가되었다. 본 연구를 통해 저풍속 및 고풍속에서의 발전이 용이한 양문형 블레이드의 우수한 출력특성과 실용화 가능성을 확인하였다.

• Steel and Composite Structures
• /
• 제26권1호
• /
• pp.31-44
• /
• 2018

This paper reports a novel steel beam-to-column connection suitable for use in the weak axis of I-section column. Monotonic and cyclic loading experimental investigations and numerical analysis of the proposed weak-axis connection were conducted, and the calculation procedure of the beam-column relative rotation angle and plastic rotation angle was developed and described in details. A comparative analysis of mechanical property and steel consumption were employed for the proposed I-section column weak-axis connection and box-section column bending connection. The result showed that no signs of fracturing were observed and the plastic hinge formed reliably in the beam section away from the skin plate under the beam end monotonic loading, and the plastic hinge formed much closer to the skin plate under the beam end cyclic loading. The fracture of welds between diaphragm and skin plate would cause an unstable hysteretic response under the column top horizontal cyclic loading. The proposed weak-axis connection system could not only simplify the design calculation progress when I-section column is adopted in frame structural design but also effectively satisfy the requirements of 'strong joint and weak member', as well as lower steel consumption.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.123-130
• /
• 2018

In this study, the optimum design of mold feed systems is determined for plug cover housing (PCH), which is a cover-assembly product that protects the wiring of automobile connectors. The design goal is to achieve the filling balance of the resin in the left and right covers while avoiding the occurrence of weld lines in the hinge as much as possible. For the optimization, an orthogonal array experiment and a main effect analysis of the design factors are performed, and the factors that cause the interactions with the two design characteristics are selected as the design variables. We present some design alternatives, i.e., some combinations of the design variables, and analyze the filling-simulation results, expected molding risk, and cost economics to select an optimum design solution among the design alternatives. In the optimal solution, the weld line is generated at a position outside the hinge, and the filling balance is also acceptable, showing that both design goals can be satisfied simultaneously despite conflicting with each other.

• 한국항공우주학회지
• /
• 제44권3호
• /
• pp.274-280
• /
• 2016

2015년 발사예정인 우주기반기술 검증용 큐브위성 STEP Cube Lab.의 주요 탑재체인 열선절단방식 힌지구동형 구속분리장치는 높은 체결력 및 저충격 구현의 장점으로 초소형위성 전개구조물의 구속/분리에 적용이 용이하며, 기존 나일론선 절단방식의 낮은 체결력 및 복수구조물 적용에 따른 시스템 복잡화의 단점을 극복가능하다. 본 논문에서는 인증모델 검증시험이 완료된 구속분리장치의 궤도검증 임무수행을 목적으로 체결력 검증 및 전개 확인 신호 획득이 가능한 비행모델을 설계/제작하였으며, 탑재체 레벨에서의 발사 및 궤도환경 검증시험을 수행하여 설계 유효성을 입증하였다.

• 반도체디스플레이기술학회지
• /
• 제2권2호
• /
• pp.31-37
• /
• 2003

This paper presents a measurement system of mechanical property using dual servo system. There are many kinds of method to measure material properties such as tensile test, indention and bending test. It is highly required to measure the properties of nano-sized material and structure. However, It is need more accurate measurement system, more stable and frequency response than conventional test. In this paper, we designed the dual servo system for a measuring instrument The dual servo system consisting of a coarse stage and a fine motion stage with VCM and PZT is proposed. Mechanical mechanism is designed with the leaf spring type of flexure hinge joint. Lead compensator is applied to this control system, and is designed by PQ method.

• 유공압시스템학회논문집
• /
• 제7권2호
• /
• pp.19-26
• /
• 2010

The typical trunk lid system for vehicle is composed of a hinge having 4-bar link and gas lifter. Here, the energy regenerative brake of hydraulic driven systems is applied to the tail gate system for vehicle and removed the gas lifter. The new tail gate system is composed of a hydraulic pump by electric motor, a hydraulic motor, four check valves, an accumulator, a relief valve and a directional control valve. The dynamic characteristics of the hydraulic motor system, such as the surge pressure and response time, are investigated in both brake action and acceleration action. The capacity selection method of accumulator by mathematical model is based upon trial and error approach and computer simulation by AMEsim software is carried out.

• 대한기계학회논문집A
• /
• 제30권9호
• /
• pp.1094-1101
• /
• 2006

Recently, a ultra-precision stage is widely used in the fields of the nano-technology, specially in AFMs(Atomic Force Microscope) and STMs(Scanning Tunneling Microscope). In this paper, the ultra-precision stage which consists of flexure hinges, piezoelectric actuator and ultra-precision linear encoder, is designed and developed. The system transfer function of the ultra-precision stage system was derived from the step responses of the system using system identification tool. A $H_{\infty}$ controller was designed using loop shaping method to have robustness for the system uncertainty and external disturbances. For the designed controller, simulations were performed and it was applied to the ultra-precision stage system. From the experimental results it was found that this stage could be controlled with less than 5nm resolution irrespective of hysteresis and creep.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.333-334
• /
• 2008

With the role of cell phones in today's society as a digital personal assistant as well as the primary tool for personal communication, it is possible to imagine the involvement of cell phones in almost any type of crime. The progression of a criminal investigation can hinge on vital clues obtained from a cell phone. This paper will be concentrated on CDMA system phones and focus on the data extraction for cell phone forensics. Especially, the data acquisition method of JTAG interface access to memory chip will be covered.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.330-339
• /
• 1996

The primary objective of this paper is to grasp characteristics of unit system, for the stabilization of stablized truss structure that is an assemblage of unit system by prestress. This unit system is composed of a central post and eight cables, and is connected by hinge joints, and stabilized by the self-equilibrated stress system. As this unit structures itself is a statically closed and stabilized system individually, it can be employed to assemble a structure with a variety of configuration. In this paper, for the stabilization of truss structure stabilized by cable tension, it is proposed the self-equilibrated axial mode equation and the range of the various geometrical parameter about unit system.