• The Korean Journal of Applied Statistics
• /
• v.29 no.4
• /
• pp.595-611
• /
• 2016

We use nonlinear regression models (such as the Hill Model) when we analyze data in toxicology and/or pharmacology. In nonlinear regression models an estimator of parameters and estimation of measurement about uncertainty of the estimator are influenced by the variance structure of the error. Thus, estimation methods should be different depending on whether the data are homoscedastic or heteroscedastic. However, we do not know the variance structure of the error until we actually analyze the data. Therefore, developing estimation methods robust to the variance structure of the error is an important problem. In this paper we propose a method to estimate parameters in nonlinear regression models based on a preliminary test. We define an estimator which uses either the ordinary least square estimation method or the iterative weighted least square estimation method according to the results of a simple preliminary test for the equality of the error variance. The performance of the proposed estimator is compared to those of existing estimators by simulation studies. We also compare estimation methods using real data obtained from the National Toxicology program of the United States.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.650-657
• /
• 2013

This study uses a muscle activation sensor and elbow joint model to develop an estimation algorithm for human elbow joint torque for use in a human-robot interface. A modular-type MVS (Muscle Volume Sensor) and calibration algorithm are developed to measure the muscle activation signal, which is represented through the normalization of the calibrated signal of the MVS. A Hill-type model is applied to the muscle activation signal and the kinematic model of the muscle can be used to estimate the joint torques. Experiments were performed to evaluate the performance of the proposed algorithm by isotonic contraction motion using the KIN-COM$^{(R)}$ equipment at 5, 10, and 15Nm. The algorithm and its feasibility for use as a human-robot interface are verified by comparing the joint load condition and the torque estimated by the algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.562-572
• /
• 2003

A matched-target model inversion method was developed for a passive sonar to estimate the position of moving targets. Based on the well known matched-field processing in underwater acoustics, the method finds target position by matching the measured target directions and frequencies with the corresponding values of the proposed target model. For the efficient and accurate estimations, the parameter searching was accomplished using a hybrid optimizing method, which first starts with a global optimization such as generic algorithm or simulated annealing then applies a local optimization of a simple down hill algorithm. The suggested method was testified using simulations for three different moving scenarios. The simulation results showed that the method is robust in convergence, even under the situation of over 5 times standard deviation of Gaussian distribution of measured error, and is practical in calculation time as well.

• Journal of Communications and Networks
• /
• v.3 no.4
• /
• pp.383-395
• /
• 2001

Recent measurement and simulation studies have revealed that wide area network traffic displays complex statistical characteristics-possibly multifractal scaling-on fine timescales, in addition to the well-known properly of self-similar scaling on coarser timescales. In this paper we investigate the performance and network engineering significance of these fine timescale features using measured TCP anti MPEG2 video traces, queueing simulations and analytical arguments. We demonstrate that the fine timescale features can affect performance substantially at low and intermediate utilizations, while the longer timescale self-similarity is important at intermediate and high utilizations. We relate the fine timescale structure in the measured TCP traces to flow controls, and show that UDP traffic-which is not flow controlled-lacks such fine timescale structure. Likewise we relate the fine timescale structure in video MPEG2 traces to sub-frame encoding. We show that it is possibly to construct a relatively parsimonious multi-fractal cascade model of fine timescale features that matches the queueing performance of both the TCP and video traces. We outline an analytical method ta estimate performance for traffic that is self-similar on coarse timescales and multi-fractal on fine timescales, and show that the engineering problem of setting safe operating points for planning or admission controls can be significantly influenced by fine timescale fluctuations in network traffic. The work reported here can be used to model the relevant characteristics of wide area traffic across a full range of engineering timescales, and can be the basis of more accurate network performance analysis and engineering.

• Journal of Forest and Environmental Science
• /
• v.31 no.3
• /
• pp.214-224
• /
• 2015

The economy of India and so also of many Asian countries depends on bamboos and their uses are not only in domestic items but also in rural housing and raw materials to several industries and germplasm characterization is an important link between the conservation and utilization of plant genetic resources. Classical taxonomic studies of the bamboos are based on floral morphology and growth habit, which can cause problems in identification due to erratic flowering coupled with different biotic agencies and environmental factors. Identification and genetic relationships among accessions of Thamnocalamus falconeri were investigated using morphology and random amplified polymorphic DNAs (RAPD) technique. Analysis started by using 51 vegetative characters and forty two 10-mer primers that allowed us to distinguish different genotypes hailing from different eco- zones of Garhwal Himalayas (India). The selected primers (12) were used for identification and for establishing a profiling system to estimate genetic diversity. A total of 79.33% polymorphism was estimated by using 12 selected primers. The genetic similar analysis was conducted based on binary digits i.e. presence (1) or absence (0) of bands, which revealed a wide range of variability among the species whereas genetic relatedness was quite high based on vegetative characters. Cluster analysis clearly showed two major clusters for both of the markers viz. morphology and RAPD belonging to 10 accessions of T. falconeri. Two major clusters were further divided into minor clusters. Cluster based on RAPD marker showed grouping of accessions of closed locality whereas analogy was reported for vegetative traits. The RAPD technique has the potential for use in species identification and genetic relationships studies of bamboo for breeding program.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.7
• /
• pp.3-12
• /
• 2004

The need to predict the rate of soil erosion, both under existing conditions and those expected to occur following soil conservation practice, has been led to the development of various models. In this study Morgan model especially developed for field-sized areas on hill slopes was applied to assess the rate of soil erosion using RS/GIS environment in the Dukchun river basin, one of two tributaries flowing into Jinyang lake. In order to run the model, land cover mapping was made by the supervised classification method with Landsat TM satellite image data, the digital soil map was generated from scanning and screen digitizing from the hard copy of soil maps, digital elevation map (DEM) in order to generate the slope map was made by the digital map (DM) produced by National Geographic Information Institute (NGII). Almost all model parameters were generated to the multiple raster data layers, and the map calculation was made by the raster based GIS software, IL WIS which was developed by ITC, the Netherlands. Model results show that the annual soil loss rates are 5.2, 18.4, 30.3, 58.2 and 60.2 ton/ha/year in forest, paddy fields, built-up area, bare soil, and upland fields respectively. The estimated rates seemed to be high under the normal climatic conditions because of exaggerated land slopes due to DEM generation using 100 m contour interval. However, the results were worthwhile to estimate soil loss in hilly areas and the more precise result could be expected when the more accurate slope data is available.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.85-85
• /
• 2020

South Korea experiences few large scale erosion and sedimentation problems, however, there are numerous local sedimentation problems. A reliable and consistent approach to modelling and management for sediment processes are desirable in the country. In this study, field measurements of sediment concentration from 34 alluvial river basins in South Korea were used with the Modified Einstein Procedure (MEP) to determine the total sediment load at the sampling locations. And then the Flow Duration-Sediment Rating Curve (FD-SRC) method was used to estimate the specific degradation for all gauging stations. The specific degradation of most rivers were found to be typically 50-300 tons/㎢·yr. A model tree data mining technique was applied to develop a model for the specific degradation based on various watershed characteristics of each watershed from GIS analysis. The meaningful parameters are: 1) elevation at the middle relative area of the hypsometric curve [m], 2) percentage of wetland and water [%], 3) percentage of urbanized area [%], and 4) Main stream length [km]. The Root Mean Square Error (RMSE) of existing models is in excess of 1,250 tons/㎢·yr and the RMSE of the proposed model with 6 additional validations decreased to 65 tons/㎢·yr. Erosion loss maps from the Revised Universal Soil Loss Equation (RUSLE), satellite images, and aerial photographs were used to delineate the geospatial features affecting erosion and sedimentation. The results of the geospatial analysis clearly shows that the high risk erosion area (hill slopes and construction sites at urbanized area) and sedimentation features (wetlands and agricultural reservoirs). The result of physiographical analysis also indicates that the watershed morphometric characteristic well explain the sediment transport. Sustainable management with the data mining methodologies and geospatial analysis could be helpful to solve various erosion and sedimentation problems under different conditions.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.1
• /
• pp.12-20
• /
• 2015

After the great King Munmu constructed Donggung-palace and Wolji-pond in 674, original landscape could not be estimated due to lack of related materials for some 1,250 years until it was surveyed in 1922. Accordingly, the study, to estimate changes of Wolji-pond landscape more accurately, analyzed the study of Hara(1932) and pictures in the Japanese ruling period etc. - these had not been studied so far. The study results are as follows. As a result of comparing survey maps of 1922 and one of 1975, it was found that during 53 years, whole area excluding island showed eroded part by 2~4m, severely, there was mounding area which was lowered by 10m. And it was identified through survey map of 1922 and pictures of the 1950's that inside southern shore protection of the No. 1 construction site were many landscape-stones(景石) which can make imagine a hill; here was water path. Trace of such path etc. remained just before excavation. 2) The construction site No. 3 and 5 in peak shape were higher than construction site No. 1, 2, and 4. Accordingly, there is high possibility that construction stood on high stylobate. So it is wrong that construction site No. 3 and 5 are restored in same height as other construction sites. Comprehensive restoration basic plan made in 2012 was also wrong. As a result of estimating changes of landscape through pictures before excavation of Wolji-pond, the author could identify changes of landscape in mound area and pumice stones which showed much changes in drawing. The study has limit due to lack of space. But if more pictures can be analyzed, it could further help for estimating original landscape of Wolji-pond.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.4
• /
• pp.328-333
• /
• 1990

In developing dynamic growth model of a crop, it is important to estimate accurate dry matter partition to different parts of crop plants. Two rice varieties, Samkang and Chucheong, were transnplanted with three planting densities of 72. 90 and 120 hills per 3.3㎡ on May 30 and June 15 in 1988 to study the effect of planting density on dry matter partition in rice plants. Total dry wight per square meter of two varieteis in May 30 transplanting were greater than those in June 15 transplanting. Total dry wights were increased as planting density was increased. The response of dry weights of differents parts of rice plants per hill were decreased as the density was increased. Although the difference in dry weights of leaf blade and stem and sheath between two varieties was not great, greater ear weight of Samkang resulted in greater total dry weight than that of Chucheong. Despite of transplant in date and planting density on dry weights, the ratio of dry matter partition to different parts of rice plants at a certain growth stage remained constant. Estimated dry weights of different parts at two stages of growth based on average ratio of dry matter partition over two transplantion dates and planting densities agreed well with those observed.

• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.340-351
• /
• 2023

Landslides are major natural geological hazards that cause enormous property damage and human casualties annually. The vulnerability of mountainous areas to landslides is further exacerbated by the impacts of climate change. Soil depth is a crucial parameter in landslide and debris flow analysis, and plays an important role in the evaluation of watershed hydrological processes that affect slope stability. An accurate method of estimating soil depth is to directly investigate the soil strata in the field. However, this requires significant amounts of time and money; thus, numerous models for predicting soil depth have been proposed. However, they still have limitations in terms of practicality and accuracy. In this study, 71 seismic survey results were collected from domestic mountainous areas to estimate soil depth on hill slopes. Soil depth was estimated on the basis of a shear wave velocity of 700 m/s, and a database was established for slope angle, elevation, and soil depth. Consequently, the statistical characteristics of soil depth were analyzed, and the correlations between slope angle and soil depth, and between elevation and soil depth were investigated. Moreover, various soil depth prediction models based on slope angle were investigated, and corrected linear and exponential soil depth prediction models were proposed.