• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.1 s.119
• /
• pp.38-47
• /
• 2007

This study was carried out to develop a new application field and obtain the basic data of citrus peel as waste in Jeju island and traditional Hanji for producing functional Hanji. The results measuring physical and optical properties, water vapor permeance and antibacterial activity are as follows. It was revealed that apparent density go as down but bulk raise up in the structural view of Hanji with increasing of the addition various Korean citrus peel (citrus unshiu, cheonggyun and hanrabong peel, and citrus unshiu peel powder) percentages, and that the density of Hanji added citrus unshiu peel was higher, but bulk was lower in compared with Hanji added other kinds of peel. Those Hanji added citrus unshiu peel, cheonggyun peel, hanrabong peel and citrus unshiu powder were very great not only in the strength (breaking length, burst index, tear index and folding endurance) but also in water vapor permeant rate in comparison with Hanji. The pHs of Hanji were neutrality (7 to 8). The brightness of the Hanji added various citrus peel percentages was low in compared to Hanji, and the 40% addition of hanrabong peel was the lowest. When 40% hanrabong peel was added to Hanji, it was very yellow in the color degree. When cheonggyun peel was added to Hanji manufacture, water vapor permeant rate was highly effective. It is known that vacant space of intrafiber was reduced by image analysis of Hanji and the additions of peel of citrus unshiu, cheonggyun and hanrabong were distributed equally in the interior of Hanji. The antibacterial activity of Hanji added citrus unshiu peel is more than 98%. After all, it would be able to increase utilization of Hanji, extensively. Namely, production of high quality Hanji added functional materials is expected for new valuable industry of citrus peel and Hanji.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.52-60
• /
• 2018

In the automobile industry, in order to increase the fuel efficiency and conform to the safety regulations, it is necessary to make the vehicles as light as possible. Therefore, it is crucial to manufacture dual phase steels, complex phases steels, MS steels, TRIP steels, and TWIP from high strength steels with a tensile strength of 700Mpa or more. In order to apply ultra-high tensile strength steel to the body, the welding process is essential. Resistance spot welding, which is advantageous in terms of its cost, is used in more than 80% of cases in body welding. It is generally accepted that ultra-high tensile strength steel has poor weldability, because its alloy element content is increased to improve its strength. In the case of the resistance spot welding of ultra-high tensile steel, it has been reported that the proper welding condition area is reduced and interfacial fracture and partial interfacial fracture occur in the weld zone. Therefore, research into the welding quality judgment that can predict the defect and quality in real time is being actively conducted. In this study, the dynamic resistance of the weld was monitored using the secondary circuit process variables detected during resistance spot welding, and the factors necessary for the determination of the welding quality were extracted from the dynamic resistance pattern. The correlations between the extracted factors and the weld quality were analyzed and a regression analysis was carried out using highly correlated pendulums. Based on this research, a regression model that can be applied to the field was proposed.

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.81-89
• /
• 2016

Purpose - Prior researches have empirically focused on the effect of management consulting quality and consultant capability on entrepreneurial firms' performance. This study, however, focused on investigating the moderating role of absorptive capacity and resource capability between management consulting and entrepreneurial firms' performance. So, this study investigated the relationship among consulting quality, consultant capability, absorptive capacity, resource capability, and entrepreneurial firms' performance from the resource based view (RBV). Especially, this study focused on the mediating role of absorptive and resource capability in relational structure of entrepreneurial firms' dimensions. Research design, data, and methodology - In this study, research hypotheses and model are established by the prior researches from the fields of strategic management and entrepreneurial behavior. Concretely, H1~H4 are the relationship between consulting (consulting quality, consultant capability) and innovation (absorptive capacity, resource capability); H5 is the relationship between absorptive capacity and resource capability; and H6~H7 are the relationship between innovation (absorptive capacity, resource capability) and management performance. The data was collected 207 copies from entrepreneurial firms in South Korea. These firms were established in January 2014 and maintained by November 2015 in high-tech industry. The questionnaire was consisted of five dimensions; consulting quality, consultant capability, absorptive capacity, resource capability, and management performance. Each dimension measured multi items on a 5-point Likert scale. The hypotheses and research model are analyzed using structural equation modeling (SEM) with AMOS 22. Results - The results of this study are as follows. 1) Consulting quality significantly influenced on the absorptive capacity of entrepreneurial firms. 2) But, consultant capability did not influence on the absorptive capacity of entrepreneurial firms. 3) Consulting quality and consultant capability significantly influenced on the resource capability of entrepreneurial firms. 4) Absorptive capacity significantly influenced on the resource capability of entrepreneurial firms; 5) Absorptive capacity did not significantly influence on the management performance of entrepreneurial firms. 6) Resource capability, however, significantly influenced on the management performance of entrepreneurial firms. By these results, absorptive capacity of entrepreneurial firms had a mediating role partly among consulting quality, consultant capability, and management capability. The resource capability of entrepreneurial firms had a mediating role among consulting quality, consultant capability, and management capability, perfectly. Conclusions - According to this study, the high level of consulting quality and consultant capability may enforce the resource capability of entrepreneurial firms. It means, practically, that external knowledge is a driver for innovation, and then the innovation effects on the management performance of entrepreneurial firms. So, at the initial stage, the management consulting programs are very important to entrepreneurial firms and should be conceived as an essential element. This study may contribute to the advancement of academic in field of new start business, small business, or venture business based on resources, especially the role of absorptive capacity and resource capability between consulting programs and management performance. However, this study has some limitations. They are the measurement of consulting quality's items, cross-sectional research, and the limitation of concept and industry.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.390-399
• /
• 2013

The purpose of this study is to examine the impact of enterprise R&D investment on inter-industry technology spillover in Korea under the new Normal Era. In order to do this, we tested the effect of production inducement, backward and forward linkage effects, and the effect of technology spillover such as technology intensity effects and technology diffusion effects based on an input-output framework. The results show that the high index industries of the production inducement effect were professional, scientific and technical activities, manufacture of metal products, and general machinery. Some manufacturers of other non-metallic mineral products and transport equipment sectors appeared to have the strong effect of forward and backward linkages that were almost equivalent to high-tech manufacturing industries. In particular, the industries of professional, scientific and technical activities appeared to have the strong effect of both forward and backward linkages. Therefore, we need to drive a strong policy support to higher enterprise R&D investment in the those particular industries not only to increase global competitiveness, but also to widen up the technology spillover effect on other industries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.72-76
• /
• 2020

The central government operates a Balanced National Development Special Account, and wants more regional development. Many local governments try various ways to establish a foothold for independent governments. Establishing a regional base center is one of the major plans for economic development, and Chungnam is proceeding with "establishing a platform for Chungnam high-tech metal materials." This paper analyzes the effects on the regional economy based on the expense that goes into a regional base center in Chungnam. For the analysis, an input/output table is used, and we present the effects of the annual input cost in detail. This study specifically analyzes the production-inducing effects, the value-added inducing effects, and employment-inducing effects using a demand-drive model. Furthermore, we suggest the effectiveness of this same business. The analyzed results give 32,230,000,000 in production-inducing effects, 13,820,000,000 in value-added inducing effects, and 101 in employment-inducing effects. These results can be used as reasonable evidence to promote the project, since the production-inducing effects and value-added inducing effects show high results, compared to input. The employment-inducing effects can also be used to create new jobs and figure out the number of people employed through this project.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.173-184
• /
• 2011

This study suggests the invigoration strategies of commercial and business functions for regeneration of old inner city as city center by examining Dangjin County which is a typical example of the local small-and-medium city where old inner city had declined as the city grew. I conducted a conjoint analysis in terms of important introduction functions and city regeneration directions for the invigoration. The results upon this are as follows. First, low-density of commercial and business places and the utilization of historical and cultural resources instead of the high-density mixed-use development should be considered. Second, It is important to promote regional specialized business and facilities rather than to attract new industry(high-tech industry) for activating local economy. Third, specific and practical countermeasures for resettlement of low-incomes and for maintenance of existing business zone should be established. Fourth, in terms of the maintenance and management, regulation on illegal commercial transactions, improvement of public spaces, and securement of user safety should be considered. Fifth, in terms of consolidation of functions, easier accessibility using public transportations, advertising and promotion of the city, and holding a number of events should be contemplated. Sixth, supporting for business activities and for establishing guides for design of old inner city should be needed. Seventh, public institutions should play a role as a bridge between local residences and experts for balanced regional development.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.2
• /
• pp.161-172
• /
• 2021

Along with the emergence of technologies related to the 4th industrial revolution, all industry sectors are making efforts to dramatically increase productivity by actively introducing high-tech technologies. Recently, the MLIT (Ministry of Land, Infrastructure and Transport) is trying to solve problems related to low productivity and high accident rate in the construction industry by applying the 4th industrial revolution technologies to infrastructure construction through smart construction R&D projects. This research was performed as part of the smart construction R&D project supported by MLIT, and the purpose is to develop a module that automatically generates moving paths for construction equipment based on the earthwork plan for road construction. The generated moving path can be used to provide safe and efficient paths for construction equipment and to support MC and MG to work efficiently. The moving paths for construction equipment are created based on the Visibility Graph and a case study is performed to show how the paths are generated based on a given construction site.

• International Area Studies Review
• /
• v.15 no.3
• /
• pp.29-53
• /
• 2011

This paper studies the contribution of imports and inward foreign direct investment (FDI) as a vehicle of technology transfer onto the EU new member states at both macroeconomic and industry level. The paper takes the effectiveness of the recipient's utilization into account by constructing a new index, the so-called Effective Absorption (EA) Index, to measure ability to absorb and utilize the foreign technology in the recipient country. Using data from 12 donors and 10 recipients from 1998 to 2009, the study at macroeconomic level indicates that technical spillovers of foreign research and development (R&D) play more crucial role relatively to domestic R&D on total factor productivity (TFP) growth of the new member states. Imports are found as the major vehicle of technical spillovers rather than inward FDI. The study at industry level is conducted by using data from 17 manufacturing industries of 10 donors and 6 recipients during 1998 to 2009. The empirical results also support the findings at country level. The patterns of technology transfer are different across industries. Nonetheless, technical spillovers exhibit significantly high contribution on TFP growth in high-tech manufacturing industries.

• Journal of the Korean association of regional geographers
• /
• v.14 no.6
• /
• pp.664-679
• /
• 2008

This paper attempts to evaluate the local economy and the local economic development policy in Goryeong County and to propose some policy alternatives for local economic development. Goryeong County has a locational advantage, which is not just geographically proximate to Daegu, a large metropolis, but also connected directly to the national highway networks. This region can also be regarded as a rural area, in a sense that the primary industry still plays a more important role for the local economy than the secondary industry and the tertiary industry. However, it is problematic that the local economic development strategies of Goryeong are universal rather than strategic and systematic. In order to design an effective regional economic development policy, the policy makers are necessary to deliberately consider regional specificity and geo-political and geo-economic situations around the region. In addition, it is important to say that policy makers, particularly in rural regions, need to break from the fantasy of high-tech industries. In this context, I propose some region-specific and context-specific policy ideas, including the promotion of the agro-food cluster and the build-up of the em-industrial complexes specialized in mechatronics and transportation equipment manufacturing.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.59-65
• /
• 2014

Purpose - The competitiveness of logistics in the 21st century rests on ensuring the efficiency and effectiveness of its local hub. While considering entry into a niche market in local logistics, it is pertinent to note that Budapest is emerging as a hub in EU enlargement in Eastern Europe. Big, small, and medium-sized businesses in Korea entered Hungary in the early 1990s since then, there has been a significant increase in Korean presence, of approximately 130 times. This study aimed to identify the key distribution issues that have emerged in relation to Eastern Europe. Research design, data, and methodology - This study indicates that 33 major Korean companies were located in Hungary, which serves as an out post to enter the European marketplace. However, Korea's exports to Hungary have declined (-32.0% in 2012) because of a loss of competitiveness against multinational corporations, due to factors such as the rise in current local distribution costs and wages. Hungary, on the other hand, through diversification and expansion of foreign trade with the non-EU markets, including Korea, is increasing its exports. Strategies of emerging countries are compared and reviewed in this study, by examining the vicissitudes of Hungary's distribution methods. Results - There are issues regarding Hungary's innovative ability. Hungary has a history of low wages and high skilled labor. However, the outflow of high-quality human resources for high-wages has become more extensive, and this underlines concerns that the CEE's trade hub is moving to neighboring countries. After the European financial crisis in 2010, the Hungarian economy is now developing, because of the IMF's measures, and it is being transformed into a trade surplus nation, while regaining distribution volumes rapidly. However, if there is continued lack of investment, the supply chain is weakened and exports decline amidst competition with TNCs or with China's distribution networks. Conclusions - It is necessary to create a new logistics approach for increasing trade between Korea and Hungary. First, Korean small and medium enterprises (SMEs) should build trust by working with advanced Hungarian talent, and they should expand into state-of-the-art fields instead of being confined to traditional sectors. Second, this study focuses on limiting and lowering their high expectations for success according to foreign direct investment (FDI) inflows and the role in the CEE distribution hub Korea should try to strengthen the distribution hub with its centralized population, using better, more highly educated human resources, thereby sustaining more innovative ability. Further, the positive effects of these measures are manifested in enhanced business on both sides of Hungary, namely, the EU and non-EU nations such as Turkey and emerging markets around Europe, and a better engagement in the core placement of culture and industry. For this, Korea can contribute to, and benefit from, a Hungarian logistics center, for adopting the high-tech cluster systems and commercializing distribution technology such as RFID·USN.