• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.4
• /
• pp.175-184
• /
• 2017

With the improvement of living standards, the ventilation for the mitigation of indoor or outdoor air-pollution problems has recently attracted a lot of attention. Consequently, the ventilation for the supply of outdoor fresh air into a room is treated as an important building-design factor. The ventilation is generally divided into the forced and natural types; here, the former can control the ventilation rate by using mechanical devices, but it has the disadvantages of the equipment costs, maintenance costs, and noise generation, while the latter is applied to most workshops due to the absence of noise and the low installation and maintenance costs. In this experimental study, the ventilation performance of a typical rotating-type natural ventilator, which is called a "wind turbine," was investigated with the outdoor-wind velocity and the indoor/outdoor-temperature difference. From the experiment results, it was confirmed that the temperature difference of $10^{\circ}C$ corresponds to the ventilation driving force with an outdoor-wind velocity of 1.0 m/s. Additionally, the intake-opening area of a building also exerts a great effect on the ventilation rates.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.1
• /
• pp.111-122
• /
• 2021

With the spread of technology in the 4th Industrial Revolution, the defense industry in South Korea is getting developed into an industrial structure in which high-tech technologies are concentrated. As the importance of defense technology has gradually increased, the government has enacted the Defense Technology Security Act and required to build a protection system for institutions that possess or manage defense technology. In order for the target institution to introduce a protection system, it is necessary to identify the defense technologies that are protected and to ensure systematic data management. In order to cope with this, we derived master data items for data management and analyzed the implementation types of defense technology master data system suitable for the defense industry environments. The derived method identified the defense technology master data, such as primary and secondary master data, and through AHP analysis, Co-existence type was suitable as the target model for the master data management system. We expect that stronger defense technology security policy will be implemented through the defense technology MDM system.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.414-420
• /
• 2022

Objective: In this study, the test-retest reliability and validity were presented to evaluate the usability of isokinetic rehabilitation equipment for the knee joint. Design: Cross-sectional design, reliability & validity study. Methods: Thirty healthy adults participated in the study. A CSMI dynamometer was used as a standardized measuring device to present the validity of the equipment. It was measured based on the dominant leg. The average peak torque value was selected as the measurement variable. After the measurement, a questionnaire was conducted on safety, satisfaction, and performance through the usability evaluation questionnaire. Results: The knee joint isokinetic rehabilitation equipment showed high reliability with Intraclass Correlations Coefficients (ICC) =0.883~0.956. In order to check the validity of the equipment, the 95% confidence interval of the mean difference limit was confirmed by the Bland & Altman plot. As a result, all three angular velocities showed a smaller confidence interval in the flexion than in extension. There were less than 10 plots that were not included in 2 Standard Deviation (SD) between all measurements. As a result of the usability evaluation questionnaire, the average of the safety domain(4.9±0.4), satisfaction domain(4.1±0.8), performance domain(4.3±0.8). Conclusions: If the product is improved by supplementing the items identified in the usability evaluation process, it is judged that it can be used as a useful device in various knee joint rehabilitation fields.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.4
• /
• pp.141-151
• /
• 2023

Recently, due to the expansion of the logistics industry, demand for logistics automation equipment is increasing. The modern logistics industry is a high-tech industry that combines various technologies. In general, as various technologies are grafted, the complexity of the system increases, and the occurrence rate of defects and failures also increases. As such, it is time for a predictive maintenance model specialized for logistics automation equipment. In this paper, in order to secure the operational safety and reliability of the parcel loading system, a predictive maintenance platform was implemented based on the Naive Bayes-LSTM(Long Short Term Memory) model. The predictive maintenance platform presented in this paper works by collecting data and receiving data based on a RabbitMQ, loading data in an InMemory method using a Redis, and managing snapshot DB in real time. Also, in this paper, as a verification of the Naive Bayes-LSTM predictive maintenance platform, the function of measuring the time for data collection/storage/processing and determining outliers/normal values was confirmed. The predictive maintenance platform can contribute to securing reliability and safety by identifying potential failures and defects that may occur in the operation of the parcel loading system in the future.

• Journal of Technology Innovation
• /
• v.26 no.1
• /
• pp.85-105
• /
• 2018

This study analyzes the economic impacts of Korean R&D expenditure on the industrial structure by technological levels using 2010~2014 Input-Output table data. The industrial structure is reclassified into 4 manufacturing industries by OECD's Technology Intensity Definition. Then, we analyzes the production-inducing and value added-inducing of those industries. As the results of the analysis, it is found that the production-inducing effect by the R&D expenditure has been higher in the middle-high and middle-low technology manufacturing and that the value added-inducing effect has been higher in the middle-high technology manufacturing. On the other hand, the production and value added-inducing effects has been lower in the high-tech manufacturing which is highest in the R&D expenditure. The above results indicate that industrial structure has not been linked with the quality ladder that expresses the enhancement of tech level through R&D expenditure. Based on these results, the policy recommendation implies that R&D expenditure should be concentrated to improve the production- and value-added effects of the high technology manufacturing in order to advance the industrial structure. However, this study has the limitation that the analyses on the dynamic-inducing effects are not carried out due to the lack of fixed capital formation data.

• Journal of Korea Trade
• /
• v.24 no.6
• /
• pp.135-156
• /
• 2020

Purpose - This study investigates whether the internationalization process of traditional industry firms can be categorized as born global, early internationalization, or gradual internationalization, and examines what factors promote internationalization in traditional industries using a case study of two firms, one each in China and Korea. Design/methodology - This study elects to use case study methodology to determine the "how" and "why" of internationalization process of traditional industry firms. Taking into consideration that factors that impact the internationalization process of firms are diverse and unclear in terms of causality, this study utilizes exploratory case study methodology. This research performs a comparative two-case study of two firms in traditional industries, one each in China and Korea, to examine similarities and differences of study subjects in order to improve the validity and suitability of research results. Findings - The findings of this research are as follows: First, traditional industries are more likely go through early and rapid internationalization rather than being born global; born globals are far more likely to appear in high tech industries. Second, the internationalization process of companies that go through early and rapid internationalization differs from what is indicated by traditional internationalization theories, and are not limited by factors like psychological distance and lack of experiential knowledge. Third, international entrepreneurship, international market orientation, and imitation and learning are important internal driving factors for early and rapid internationalization. Fourth, conditions within the domestic market, policy support from the government, and pilot effect from industry leaders are external driving factors for early and rapid internationalization. Originality/value - This study shows that the internationalization process of traditional industry firms is more likely to be early and rapid internationalization rather than being born global and suggests answers to why this may be the case. In addition, through an examination of case studies, it reveals that the internationalization process of traditional industry firms that undergo early and rapid internationalization is different from traditional internationalization theory, in that they are not limited by the lack of psychological proximity and empirical knowledge, and are driven by international entrepreneurship, international market orientation, imitation and learning, competitive pressure within the domestic market, government's policy support, and the pilot effect of industry leaders. Therefore, this study contributes to literature by expanding the scope of application of born global theory to traditional industries, making born global theory more generalizable and identifying driving factors to internationalization of traditional industry firms.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.441-453
• /
• 2021

Recently, the untact healthcare industry due to COVID-19 has been attracting attention, and the telemedicine industry based on medical information has become a field of the healthcare industry receiving attention. However, in Korea, due to obstacles in the legal system, telemedicine is still illegal between doctors and patients. In the case of neighboring China, the reality is the opposite of the recent rapid growth of the telemedicine industry under the leadership of the government. This study looks at this from the perspective of the industrial innovation system on the grounds that telemedicine is an industry and innovative technology needs to be changed to clarify the difference between domestic and Chinese telemedicine industries. As a result of analyzing China's telemedicine industry on the seven sub-divisions of demand conditions, innovators, networks et al., Such as seizing appropriate opportunities for demand driving effects and appropriate communication between economic actors were identified as major success factors. This researcher proposes the following suggestions. first, it conforms to the current digital New Deal policy flow, and conducts a demand survey on the change in demand for medical services in the 4th Industrial Revolution and the Untact Era. For the introduction, a plan to conduct a demand survey for the public and second, second, a plan to grow and intensively foster digital high-tech medical care as a new industry was suggested.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.349-354
• /
• 2023

This study wa s conducted a s pa rt of ma ximizing the use of ca rbon dioxide by a pplying CCU(Ca rbon Ca pture, Utiliza tion) a mong technologies for reducing CO₂ in the cement industry. In a carbon dioxide curing environment, changes in carbonation depth and changes in basic physical properties by age due to the mixing of carbonation reaction accelerators were usually targeted at Portland cement paste. In addition, in order to check the fixed amount of CO₂ in the concrete field, a thermal analysis method was applied to evaluate CaCO₃ decarbonization at high temperatures. As a result of the evaluation, it was confirmed that the carbonation depth in the cured body significantly increased due to the incorporation of CRA in the carbonation depth diffusion performance. In addition, it was confirmed that the weight reduction rate increased by 23.8 % and 40.77 %, respectively, compared to Plain, in the order of curing conditions for constant temperature and humidity and curing conditions for carbonation chambers, so it was confirmed that the amount of excellent CaCO₃ produced by the addition of CRA increased as the concentration of CO₂ increased.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.1-15
• /
• 2017

The aim of this study is to plan a design that satisfies consumer needs by forecasting future properties following changes of gauge in basic Jacquard structure and to provide helpful data for a variety of knit-wear development. Four basic Jacquard knit samples (Normal Jacquard, Bird's eye Jacquard, Floating Jacquard, Tubular Jacquard) were selected and projected by using three types of gauges (7G, 12G, 14G) with an SES-122S type Computer Knitting machine of Shimaseiki MFG. Twelve different types of samples with Jacquards and gauges were tested on a flat table by measuring the course and wale in a 1cm area to calculate the gauge of samples. The mechanical properties of 12 types of Jacquard samples were measured using KES-FB (Kawabata Evaluation System for Fabric, Kata Tech Co. Ltd). As the result of comparing the number of patterns, courses and wales depending on the change of gauge of the basic Jacquard structure, it was observed that the number of patterns per specific length, course and wale has increased from 7G to 14G, a high-gauge. According to objective research regarding Jacquard structure, 7G Tubular Jacquard, which is low gauge, seems to be suitable for masculine design as it is heavy and thick, and has rigid and rough texture due to a high level of flexural strength and shear property. 14G Floating Jacquard, which is high gauge, seems to be suitable for feminine, silhouette design as it is light, thin, soft, flexible and has high drape. The result of this study provides a theoretical foundation for knit-wear development considering basic Jacquard structure and gauge-specific properties. This study can be used to provided directions for the development of knit industry.

• Journal of Korea Technology Innovation Society
• /
• v.9 no.1
• /
• pp.1-25
• /
• 2006

Technological innovation is being recognized as a core capability of competitive advantage for sustainable growth of a company. In this regard, lots of research activities have been conducted on technological innovation and performance at firm level. Ihis study empirically investigates those relationship with cross-sectional and time-series data according to firm-specific characteristics along industry. Patent intensity, R&D intensity, and intangible asset intensity smoothing by firm size are used as proxy measures for explanation of performance with net income per employee. As a result with 162 high-tech firms for 11 years, it was found that high performances were positively related to patent and R&D intensity. Also, firms classified into 8 categories based on firm-specific technological innovation characteristics show difference upon performances. To sum up, firms that have high patent and R&D intensity demonstrate high performance compared to other firms.