• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.1
• /
• pp.49-54
• /
• 2023

Recently, System in Packaging(SIP) technology needs to meet high frequency (5G and more) communication technology and fine pitch surface treatment. The conventional Electroless Ni/Immersion Au plating(ENIG) is not suitable for high frequency range because of magnetic properties are increasing the transmission loss. Without nickel plating layer, the pattern and pad reliability level must be meet the condition. In this review paper, we investigated research trends on Ni-less surface treatment technology for high-frequency communication and frequency characteristics according to materials.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.217-218
• /
• 2009

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.3
• /
• pp.27-35
• /
• 2016

Ministry of Science, ICT and Future Planning have boosted up launching more 'GRI(Government Research Institute) Spin-off High-tech startup' to accelerate the technology commercialization of GRI technologies via the alternative of high-tech startup since 2101. This paper is proposing to found the global platform of accommodating more successful high-tech startup with diagnosing the current policy platform of launching GRI high-tech startup. This paper deliver the outcomes of case study including FGI research over developing the ideas of the experts for the policy line-up of starting from GRI technologies-Hardware Manufacture-BtoB-Global. The research result suggests that the focus of policy should falls not on the quantitative goals, but on more disruptive successful case through utilizing uprising private equity investment in the early stage of business. One of the best policy brought by this research is 'Inbound Globalization Strategy of bringing global early stage investors in Korea for incubation and investment rather than sending out our startup to global without validation by global investor.

• Journal of Sensor Science and Technology
• /
• v.27 no.5
• /
• pp.311-316
• /
• 2018

An antenna-coupled bolometer-type terahertz sensor was designed, fabricated, evaluated, and utilized to obtain terahertz transmission images. The sensor consists of a thin film bowtie antenna that resonates accordingly in response to an incident terahertz beam, a heater that converts the applied current in the antenna into heat, and a microbolometer that converts the rise in temperature into a change in resistance. The device is fabricated by a bulk micromachining process on a 4-inch silicon wafer. The fabricated sensor chip has a size of $2{\times}2mm$ and an active area of $0.1{\times}0.1mm^2$. The temperature coefficient of resistance (TCR) of the bolometer film (VOx) is 2.0%, which is acceptable for bolometer applications. The output sensor signal is proportional to the power of the incident terahertz beam. Transmission images were obtained with a 2-axis scanning imaging system that contained the sensor. The small active area of the sensor will enable the development of highly sensitive focal plane array sensors in terahertz imaging cameras in the future.

• STI Policy Review
• /
• v.3 no.1
• /
• pp.46-62
• /
• 2012

This study investigates the effects of the two most important indicators of a nation's state of scientific infrastructure: R&D investment and the number of R&D researchers engaged in high-tech product export competitiveness for a panel of 11 countries/economies from East Asia from 1994 to 2010. A GMM panel estimation method was employed to account for the dynamic effect of trade and to control for un-observed country specific effects that may arise due to an inter-country differences and intra-country dynamics. Accordingly, the empirical results reveal that (once controlled for the influence of per capita income) physical capital and infrastructure, a 1% increase in a country's expenditure on the ratio of R&D to GDP may increase high-tech product export performance by approximately $397 million per year. Other factors constant, a 1% increase in the number of R&D researchers is expected to increase the ability to export high-tech products by approximately $67 million. The East Asian development experience demonstrates how latecomers can follow systematic industrialization and join the handful of economies that have come a long way toward closing the knowledge gap with the global technological leaders. However, this does not mean that the policy approaches and overall commitments pursued by each East Asian economy in relation to R&D investment and acquisition of an adequate pool of researchers, and their ultimate achievements in high-tech product export competitiveness were uniform. As a result, there is still a significant variation among countries/economies in terms of performance. This study recommended a number of potential tools and policy instruments that may assist policy makers to foster R&D as an engine to enhance the high-tech product export competitiveness.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.2
• /
• pp.23-33
• /
• 2014

This paper aims at delivering significant implications to high-tech startups by visualizing the implementation process of leading KOSDAQ listed companies's business model. This paper founded two meaningful outcomes; first, hish-tech starts-up make a clear direction of implementing intangible business model in real business, second, targeting the role model of benchmarking business model among leading companies, by linking common feature between high-tech starts-up and leading KOSDAQ listed venutures sharing one of Key performance indexes falls on viable business model. The research results of visualizing the implementation of leading KOSDAQ listed ventures' business model shows three major implications. First, business model indicates not just simple logic of creating and delivering values, but more shows CEO leading management vehicle. Second, business model represents the multi-dimension process itself of integrating in and out company's core assets and competencies initiated by CEO. Third, financial outcomes of business model is automatic result of implementing on setting target customer, creating value, and delivering it rather than planned strategically. Fourth, the focal points of implementing business model falls on collecting real information from business sites.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.595-599
• /
• 2011

ALC(Autoclaved Lightweight Concrete) is produced using quartz sand, lime and cement and water. And aluminum powder is used for blowing agent. ALC is manufactured by autoclave chamber under high-temperature and high-pressure. Generally, ALC is 1/4 levels lighter than concrete and mortar, because it has a lot of pores. So density of ALC is about 0.45~0.65 g/$cm^3$. But, ALC has a weakness, typically low strength, with its porous structure. So, it is necessary to excellent strength properties for extensive apply of ALC materials in high porosity. In this study, melamine resin was used to improve the strength characteristics of ALC materials. We performed compressive and bending strength measurements. Compressive strength of ALC with 2% melamine resin increased 26.88% than 'melamine-free' ALC. Also we performed functionality evaluation such as thermal conductivity, sound absorption, and flame-resistance.

• International Area Studies Review
• /
• v.12 no.2
• /
• pp.149-173
• /
• 2008

This paper empirically studies the relationship between R&D expenditures and firms value. First, we can conjecture that R&D expenditures are enhancing the firms value. Such findings depend on an existing research, which R&D expenditures are intangible asset rather than expenses. Although, under U.S. accounting standards, financial statements do not report intangible assets but costs. Second, we can conjecture that short-term, the rate of increase in R&D expenditures had negative influence on firms valuation, because such findings indicates that R&D spending of costs incur mis-pricing. But long-term, consistently R&D expenditures may attract investors on the stock market. Third, lately firms focus on capital efficiency management, such a firms R&D expenditures incur high ROE. Generally investors put too much confidence in capital efficiency management and high ROE may attract investors on the stock market. Finally, High-Tech through the R&D investment improve firms competitive advantage, by competitive advantage, firms have reduced cost and raised productivity in the end improve firms value.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.20-24
• /
• 2010

High speed cutting processes of rigid flexible printed circuit board by making use of high power UV laser with nano-second pulse width have been proposed and investigated experimentally. Also robust laser cutting system has been designed and developed in order to obtain a good cutting quality of rigid and flexible PCB with multi-layers (2-6 layers). Power controller module developed for ourselves is adapted to control the laser output power in the range less than 1%. The systems show the good performance of cutting speed, cutting width and cutting accuracy, respectively. Especially we have confirmed that the short circuit problem due to the carbonized contamination occurred in cross section of multi-layers by thermal effect of high power laser has been improved largely by using multi-pass cutting process with low power and high speed.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.605-618
• /
• 2021

The use of human resources determines the success of enterprises. This study applies the questionnaire design method to analyze the relationship between job stress, job satisfaction, and job performance, noting that few studies have comparatively examined these variables between industries, especially between high-tech and traditional industries. The proposed assessment model in this study can facilitate decision-makers' ability to make the optimal business decisions through their personnel systems, thereby improving employee satisfaction and increasing job performance. This study found that in the traditional and high-tech industries, some demographic variables have significant differences in the job stress, job satisfaction and job performance, but the demographic variables that can significantly affect the differences in these job's variables are differences between industries. This study acknowledges that job stress and performance have a significantly negative correlation, and traditional industries will have more stress factors than high-tech industries. In addition, support for traditional industries exist in job satisfaction and performance has a significantly positive correlation, but not in high-tech industries. Job stress for performance has a significantly negative correlation in two industries. This study reconfirmed the relationship between job stress, satisfaction and performance, found some differences in this relationship and the respective industrial characteristics.