• International Journal of Concrete Structures and Materials
• /
• 제8권3호
• /
• pp.259-268
• /
• 2014

This paper presents results of an experimental study which investigates the effect of industrial pozzolan made from calcined silt of dam at $750^{\circ}C$ for 5 h, on mechanical properties and durability of ordinary mortar, compared to the silica fume. Mortar specimens prepared with 5, 10 and 15 % of calcined silt to substitute cement were evaluated for their compressive and flexural strength, sulfate, acid and penetration of chloride ions resistance. The results were compared with ordinary mortar (without addition) and mortar containing 10 % of silica fume. The results obtained showed that the calcined silt of dam has a high potential to be used as a pozzolanic material, it improves the strength and the durability of mortar and compete the silica fume.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.63-64
• /
• 2023

In order to reduce the high absorption ratio of spent coffee grounds, this study examined the compressive strength and absorption ratio of mortar replacing coated spent coffee grounds according to the type of water repellent. In order to examine this, as the water repellent used, a silane-based water repellent (fluorine-based water repellent) and an acrylic-based water repellent, which are film-type water repellents, and a silane/siloxane-based water repellent, which are penetration-type water repellents, were used. The spent coffee grounds were coated with each of three water repellents, and mortar was prepared by mixing cement and fine aggregate. As a result of the experiment, the compressive strength and absorption ratio of the mortar replaced with coated spent coffee grounds coated with the film-type water repellent were superior to the penetration-type water repellent. Therefore, in order to reduce the high absorption ratio of spent coffee grounds, a suitable water repellent is a film-type water repellent. Among them, it is judged that the acrylic type has excellent water repellency and is suitable.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.539-544
• /
• 2002

The properties of mortar and concrete including metakaolin as a partial cement replacement were investigated in terms of fluidity and compressive strength. The results show that mortar and concrete in which 10 % of cement is replaced with metakaolin exhibit much higher compressive strength after 3 days of hydration than ordinary Portland cement, indicating that metakaolin can be used in the production of high strength concrete replacing silica fume. The type of superplasticizer largely affected on the fluidity and compressive strength of mortar and concrete including metakaolin. It was concluded that when metakaolin is used for the purpose of manufacturing high strength concrete, it is desirable to use PNS based blends rather than PNS, PMS and polycarboxylate based superplasticizer.

• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.51-56
• /
• 2000

Fly ash used as a cement replacement material increases the long term strength and also improves the durability of concrete and mortar. However, the use of fly ash is a little in spite of great benefit. In order to increase the consumption of fly ash, it has to be used as a cement replacement materials in the production of mortar and concrete, and the reduction of early strength development due to the use of fly ash also has to be diminished. In this study, many chemical compounds which accelerate the early strength was investigated. The $Na_2$$SO_4$, $K_2$$SO_4$, Triethanolamine were selected and applied to the production of mortar. It was found that they enhance the early strength development of mortar(1, 3day) and decrease the amount of $Ca(OH)_2$, and also increase the production of ettringite. According to the results of mercury instruction test, the pores ranged from 0.01 $\mu\textrm{m}$ to 5$\mu\textrm{m}$ were decreased and it was also found in the analysis of X ray and SEM that fly ash increases the amount of ettringite at early ages.

• 한국건축시공학회지
• /
• 제18권1호
• /
• pp.41-49
• /
• 2018

본 연구는 고강도, 고유동의 성질을 갖고, 시공 후 수축현상이 저감되어 균열발생을 저감시킬 수 있는 바닥모르타르 배합선정에 관한 연구로서, 최적배합을 선정하기 위한 배합시험과 선정된 배합의 압축강도, 휨강도, 플로, 길이변화성능 및 염화물침투 저항성, 내화학성 등의 성능시험을 실시하였다. 시험결과, 유동성과 조기강도 발현이 가능하며, 수축저감을 통하여 균열발생 위험성을 개선시킬 수 있을 것이라 판단되는 배합을 선정하였으며, 선정된 배합은 자기수평모르타르 규격에 만족하는 성능을 확보하는 것으로 확인되었다. 본 연구의 결과를 통하여 우수한 재료성능과 경제성, 시공성을 갖는 고성능, 고유동의 바닥모르타르 시공기술을 확보할 예정이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.180-181
• /
• 2017

This study aims to analyze the high strength mortar's fundamental properties and autogenous shrinkage properties by taking into consideration the result of the previous study in which it was found that ERBO(Biodiesel) exercises greatest effect on the expansion effect of mortar, and changing the time and rate of mixing the ERBO. A total of five levels were set as experimental variables: the three levels of the rate of ERBO, 0, 0.5, 1.0%, and the two levels of the time of mixing the ERBO: first, adding the ERBO with the mixing water and mixing it before, and second, mixing it after the mortar is completely mixed. It was found that the rate of length change decreased as the rate of ERBO increased, and the rate of length change was lower when the ERBO was mixed sooner.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.45-48
• /
• 2005

This study is basic experiment for estimating influence of strength by curing temperature of concrete's heat of hydration and estimate relationship of compressive strength development by initial curing temperature factor, and then asume temperature factor which influence compressive strength development and for showing basic document of qualify control. According to the result of cement mortar by the curing temperature factor high-curing temperature shows high strength on 3 day compare with low curing-temperature, shows higher strength than the piece of high curing temperature.

• 한국건설순환자원학회논문집
• /
• 제2권2호
• /
• pp.100-106
• /
• 2014

고강도 콘크리트는 구조적으로 우수하며 사용성 및 내구성이 뛰어나 건축물에서 그 활용성이 꾸준히 증가하고 있다. 그러나 화재처럼 고온에서 고강도 콘크리트는 폭렬이 발생될 가능성이 있으며, 폭렬 원인은 콘크리트 내부의 수증기압이 가장 큰 원인으로 알려져 있다. 콘크리트의 폭렬을 제어할 수 있는 일반적인 방법은 콘크리트 표면에 내화피복을 사용하여 화재 시 부재의 온도상승을 억제하는 방법이 있다. 이에 따라 본 연구에서는 각종 골재와 유기섬유를 사용하여 콘크리트 내화피복용 모르타르를 제조하고 그 고온 성상을 파악하고자 한다. 실험결과 퍼라이트와 폴리프로필렌 섬유를 사용한 모르타르는 내부공극과 밀도를 변화시켜 내부온도 상승을 지연시킨다. 그 결과 고강도 콘크리트의 폭렬을 방지할 수 있는 내화 피복재로 활용 가능하다.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.45-50
• /
• 2012

폭렬은 철근노출과 함께 구조부재의 단면을 감소시키며, 이로 인하여 구조적 거동에 심각한 문제를 발생시킨다. 고강도 콘크리트에 내화 모르터를 피복함으로서 화재시 폭렬을 방지할 수 있으며, 콘크리트 내의 철근의 온도상승을 지연시킬 수 있다. 본 연구의 목적은 이러한 고강도 콘크리트의 내화피복재로 활용하기 위한 것으로 퍼라이트와 폴리프로필렌 섬유로 경량 모르터를 제조하여 온도이력 성상을 파악하는데 있다. 이에 따른 실험인자로는 폴리프로필렌 섬유의 첨가량과 길이이다. 연구결과 폴리프로필렌 섬유를 첨가함으로서 모르터의 공극구조를 변화시킬 수 있었으며, 이는 내부 온도상승을 지연시킨다. 또한 고강도 콘크리트의 내화피복재로서 경량 모르터를 사용할 수 있는 가능성을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.81-82
• /
• 2011

This paper is to compare and analyze WOE created by emulsifying waste oil & WOES added by stimulant with the existing SR in order to solve the problem of strength and reduction in fluidity occurring in time of the use of waste oil to reduce the autogenous shrinkage of high strength mortar. As experimental results, in case of WOE, there almost never happened a drop in fluidity at 1% replacement and compressive strength also showed the strength value similar to Plain. On the other hand, the effect of strength improvement consequent upon the use of stimulant was found to be insufficient. The change of autogenous shrinkage generally showed a better reduction effect in shrinkage comparing to Plain. In case of WOE1, reduction effect in autogenous shrinkage was found to be more excellent than the existing SR. Accordingly, WOE1 is analyzed to be desirable if reduction in autogenous shrinkage, strength & up to the aspect of fluidity are taken into consideration.