• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.695-698
• /
• 2010

본 논문은 High-speed signal에 대한 기본적인 설계 방법론, Differential signaling, Impedence matching, Decoupling Method 등에 대하여 논한 후 High-speed signal 의 전송 품질을 개선하기 위한 GND via 의 효과에 대하여 논하고자 한다. S-parameter simulation 및 실제 제품 적용 후 파형의 변화를 관찰하여 GND via 의 효용성을 살펴보아 High-speed signal Design 할 때 Design limitation 상황에 대해 적절한 방법론을 말하고자 한다.

• 한국전자파학회지:전자파기술
• /
• 제24권2호
• /
• pp.35-50
• /
• 2013

This paper discusses effects of mesh planes on signal integrity in high-speed glass ceramic packages. One of serious signal integrity issues in high-speed glass ceramic packages is high far-end (FE) noise coupling between signal interconnects. Based on signal integrity analysis, a methodology is presented for reducing far-end noise coupling between signal interconnects in high-speed glass ceramic modules. This methodology employing power/ground mesh planes with alternating spacing and a via-connected coplanar-type shield (VCS) structure is suggested to minimize far-end noise coupling between signal lines in high-speed glass ceramic packages. Optimized interconnect structure based on this methodology has demonstrated that the saturated far-end noise coupling of a typical interconnect structure in glass ceramic modules could be reduced significantly by 73.3 %.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권2호
• /
• pp.11-15
• /
• 2002

High speed probe for measurement of sin91e flux quantum circuits is comprised of coaxial cables and microstrip lines in order to carry high speed signals without loss. For the impedance matching between coaxial cable and microstrip line, we have determined the dimension of the microstrip line with 50${\Omega}$ impedance by simulation and then have investigated the effect of line width and cross-sectional shape of signal line, dielectric material, thickness of soldering lead at the coaxial-to-microstrip transition Point, and the an91c between dielectric material and end part of the signal line on the characteristics of signal transmission of the microstrip line. From the simulation, we have found that these all parameter's had influenced on the characteristic of signal transmission on the microstrip line and should be reflected in fabricating high speed probe, We have also determined the dimension of coplanar waveguide to fabricate testing sample for performance test of high speed probe.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.338-344
• /
• 2000

This paper proposes a field-oriented control strategy without speed sensor in overall speed range. At low speed region including zero speed, the electrical saliency which is due to the main flux saturation is used in order to estimate an instantaneous flux position. This electrical saliency can be obtained from the difference of high frequency impedance by the high frequency signal injection. This method enables the stable operation at zero speed or stator frequency even under heavily loaded condition. However, because of the high frequency signal injection the loss and noise in motor increase and the voltage margin is reduced as the motor speed increases. Therefore, this algorithm must be supplemented with the algorithm based on the electrical model of motor, which is conventionally used in the region except the low speed. This paper proposes the combination algorithm between the high frequency signal infection method and the adaptive observer, in which the rotor flux and motor speed can be simultaneously estimated by the adaptive control theory. This combination algorithm enables the stable operation of field-oriented speed control without speed sensor in overall speed range. This is verified by experimental results.

• 한국전자통신학회논문지
• /
• 제9권10호
• /
• pp.1197-1205
• /
• 2014

최근 초고화질(4K-UHD) 영상 시스템의 신호전송은 비압축 고속 데이터로 전송되며 고속 신호의 인터페이스 구간에 서로 다른 케이블 사이에서 나타나는 EMI, 스큐(skew) 문제로 인하여 영상신호의 왜곡, 지터 등으로 시스템 구현에 한계가 있다. 이와 같이 비압축 고속 데이터를 고속전송하기 위하여 V-by-One HS 인터페이스 기법을 적용하여 본 논문에서는 고속 영상신호에 대하여 HSD(High Speed Differential) 전송선로의 신호무결성을 분석하였다. UHD 영상패턴 제어 인터페이스의 PCB 설계 방법을 RF 전송기법으로 적용하였으며 구현된 4K-UHD급 영상패턴 제어 신호발생기의 V-by-One HS 영상신호를 측정한 결과, 전송품질이 고속전송신호규격에 만족함을 보였다.

• 한국정보처리학회논문지
• /
• 제7권4호
• /
• pp.1263-1270
• /
• 2000

The operation frequency of High-speed Communication System becomes very fast with the advanced technology of VLSI chips and system implementation. There may exist various types of noise sources degrading the signal integrity in this system. The present main system is made of backplane, so faults can be brought whenever a board is removed, replaced or added. This backplane boards testing is a very important process to verify the operation of system. firstly, we model the effects of the internal noises in the High-speed Communication System to the signal line and propose a new design method to minimize these effects. For the design methodology, we derive the characterization value for each mode land them construct the optimal simulation model. We compare the result of own proposing method with that fo the existing methods, through simulation and show that the quality of High-speed Communication System is significantly enhanced. Secondary our proposing BIST for the Backplane Boards Testing is designed to guarantee that there is no fault in the high-speed communication system.

• 전기학회논문지P
• /
• 제60권1호
• /
• pp.37-44
• /
• 2011

HSPA(High Speed Packet Access)/HSPA+ is a combined 3GPP(Third Generation Partnership Project) standard of HSDPA(High Speed Downlink Packet Access) and HSUPA(High Speed Uplink Packet Access). The standard can provide the high speed multimedia service against the 3GPP release 99 standard. In order to test the 3GPP HSPA/HSPA+ terminal performance, the measurement hardware is required for the evaluate the transmitted signal of HSPA/HSPA+ terminals. Agilent Technologies and Innowireless produce the measurement equipments for HSPA/HSPA+ terminals. Generally speaking, the receiving algorithms in normal modems cannot be used directly to the measurement system due to the lack of the algorithm accuracy. In this paper, we propose the new receiver algorithm for precise measurement of 3GPP HSPA/HSPA+ terminal signal, and implement measurement functionality for performance measurement of the 3GPP HSPA/HSPA+ terminal by using software. The proposed 3GPP HSPA/HSPA+ signal measurement algorithm can be used for the commercial system through code execution speed optimization.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.987-990
• /
• 2000

In modern manufacturing industry such as aerospace, vehicle and die/mold industry, the high hardness malarial which is remarkable in aspects of durability is effectively used. The high-speed and precision machining technology has been applied in these fields. In this study, efficient sensors in high-speed machining by observing similar tendency through comparing cutting force with AE signal, gap sensor signal and accelerometer signal are selected, and machinability of high-speed machining is experimentally evaluated. We performed a basic research for sensing system construction to monitor a machine tool and machining condition.

• 대한기계학회논문집A
• /
• 제25권2호
• /
• pp.228-234
• /
• 2001

To obtain precise machined surface and high productivity in machining, high speed end milling has beed studied recently. Though high speed end milling is explicitly effective for precision surface generation geometrically, tool deflection, chatter vibration and frequency characteristics of end milling system deteriorate the theoretical surface. In this study, simulation algorithm and programming method are suggested to simulate machined surface using acceleration signal in high speed end milling. This simulation is conducted by considering vibrational effect of spindle system which was not considered by other investigators. Good agreements were obtained between simulated results and experimental results.

• 한국정보통신학회논문지
• /
• 제6권1호
• /
• pp.25-29
• /
• 2002

High speed 신호처리는 통신분야, SC circuit, HDTV, ISDN 등에서 관심이 더욱 승가하고 있으며, high speed 신호처리를 위한 많은 방법들이 있다. 본 논문에서는 CMOS 공정에서 고주파 Op-amp의 실현을 의한 설계를 기술하였다. 아날로그 집적회로를 기초로 하는 high speed op-amp의 기능을 제한하는 요소 중 한가지는 유효 주파수 범위이다. 본 논문에서는 $C_{L}$ =2pF에서 단위이득 주파수가 170MHz인 향상된 대역폭적을 가지는 CMOS op-amp 구조를 계발한다. 공정은 1.2$\mu$디자인 룰을 따른다. 본 논문에서 제시한 CMOS op-amp 고주파 SC filter에서 요구하는 큰 커패시터 부하에서의 넓고 안정된 대역폭을 얻기에 매우 적합하다.