• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.4 s.142
• /
• pp.341-349
• /
• 2005

With increasing demands of high speed transportation, recently a lot of high speed marine vehicles, such as SWATH, semi-planing craft, planing craft, hydrofoil craft, SES and so on, have been paid attention especially in high speed region over the Froude number 0.5. The resistance characteristics of the vehicles should be experimentally evaluated in the towing tank. At the Seoul National University, a light-weight cantilever type towing carriage was devised and installed in the towing tank. Wireless measurement devices were also provided for appropriate data acquisition during high-speed towing tests. With the new carriage system, a series of model tests were performed to investigate the hydrodynamic characteristics of a stepped planning hull in the towing tank and the resistance performances of the hull are introduced in this report.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.5
• /
• pp.349-355
• /
• 2014

The resistance test of a high speed craft such as planing ship is performed with a high speed towing carriage instead of ordinary towing carriage because of the speed limitation. In the resistance test using high speed towing carriage, the model ship is fixed to the carriage to restrain the running attitude for enough measuring time. Such method is called fixed model test method. In the fixed model test method, to get the appropriate running attitude, the model test is iteratively repeated until the trim moment and lift force are close to zero. In this research, trim free model test method is investigated to reduce the number of iteration. And, the limitation of towing speed range in the trim free model test method is investigated.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.813-818
• /
• 2007

There are the C.W.C and Towing Tank to the model-test equipments of the boat. A model testing of the high speed boat have a difficult in the performance verification because of very a small the scale-ratio of the ship-model and restricted by flow-velocity of the C.W.C and X-carriage velocity of the T.T. In general, the stepped hull boat is a high of fuel-efficiency because of the resistance reduction by a small wetted surface-area in correspond without stepped-hull boat. But It have a tendency to be bad the rolling performance by reduced stern wetted-area In this paper, the high speed stepped planning-boats with & without attached a stern body were performed to compare the effect of resistance and rolling performance by using sea model-test method.