• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.575-582
• /
• 2006

Guaranteeing network bandwidth and system performance becomes important technical matters to make seamless delivery of bulky data at high speed. Tuning system and network parameters including jumbo frame, kernel buffer size, and interrupt coalescence determines end-to-end transmission throughput. Additionally, fine-tuning of the parameters alleviates workload on high-end systems. Until now, many studies have concentrated on how to increase transmission throughput but rarely discussed how to mitigate system workload. In this paper, we have investigated various tuning parameters, which positively affect networking and processing performance of uncompressed HDTV system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.708-713
• /
• 2010

In this research a ring light was developed so that a partial shadowless shooting for the patient's affected area at the medical treatment room and surgical operation room using high luminance light emitting diode (LED) for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area. And at the time of design of ring light, the characteristics of LED and the loss of light at the time of penetrating light diffusion PC were considered so that intensity of illumination for over 150 lx can be obtained. The result of measurement of the intensity of illumination of the ring light that was developed revealed that maximum intensity of illumination of 225.7 lx was obtained, while smoke index was measured to be maximum 78 Ra in the case of Red(50%) Green(100%) and Blue LED(60%). We could confirm that response speed was also very fast as 1.72 ms.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.586-588
• /
• 2007

The Moore's law states that the number of transistors on a chip doubles about every 18 months. And it was reported that the network speed has been doubled about every 9 months. This indicates that computing power and network is no longer the obstacles for the high performance applications requiring terabits networks. We believe that the application motivates the network and vice versa. This presentation will introduce the GLORIAD which is the first ring network connecting six countries around the world and provides scientists with advanced networking tools that improve a communications and data exchange. The GLORIAD trans-Pacific link started its service on August 1, 2005. Since then, there has been remarkable demonstrations were performed through major conferences like Supercomputing Conference. This paper will introduce the global collaborative works on demonstrations of VMT, high energy physics, SDSS and HD video transmission during SC'06 in Tampa, FL.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.414-420
• /
• 2005

The ShortStack Micro Server enables any product that contains a microcontroller or microprocessor to quickly and inexpensively become a networked, Internet-accessible device. The ShortStack Micro Server provides a simple way to add LonWorks networking to new or existing smart devices. . It implements the LonTalk protocol and provides the physical interface with the LonWorks communication. The ShortStack host processor can be an 8, 16, or 32-bit microprocessor or microcontrollers. The ShortStack API and driver typically require about 4kbytes of program memory on the host processor and less than 200 bytes of RAM. The interface between host processor and the ShortStack Micro Server may be a Serial Communication Interface (SCI). The LonWorks control module with a high performance is developed, which is composed of the 8 bit PIC Microprocessor for host processor and the smart neuron chip for the ShortStack Micro Server. This intelligent control board is verified as proceeding the various function tests from experimental system with an boost pump and inverter driving systems. It is also confirmed that the developed control module provides stably 0-10VDC linear signal to the input signal of inverter driving system for varying the induction motor speed. Thus, the experimental results show that the fabricating intelligent board carried out very well the various functions in the wide operating ranges of boost pump system. This developed control module expect to apply to industrial fields to require the comparatively exact control and monitoring such as multi-motor driving system with inverter, variable air volume system and the boost pump water supply systems.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.188-195
• /
• 2004

We have analyzed the performance of TCP in the CDMA mobile communications systems with the adaptive modulation and coding(AMC). The wireless channel using AMC is characterized with not high error rate but highly varying bandwidth. Due to time-varying bandwidth, timeout events of TCP occurs more frequently, which leads to the throughput degradation. The analysis model is composed of the two parts. In the first part, we divide TCP packet stream into ‘packet groups’and derive the probability distribution of the wireless transmission time of each Packet group that reflects the time varying characteristics of AMC. In the second part, we formulate embedded Markov chain by making use of the results of the first part to model TCP timer mechanism and wireless transmission. Since our system model is characterized by the forward link high speed data transmission using AMC, the results reported in this paper can be used as a guideline for the design and operation of HSDPA, 1xEV-DO, and 1xEV-DV.

• Journal of KIISE:Information Networking
• /
• v.33 no.2
• /
• pp.113-130
• /
• 2006

Recently with the explosive growth of Internet applications, the attacks of hackers on network are increasing rapidly and becoming more seriously. Thus information security is emerging as a critical factor in designing a network system and much attention is paid to Network Intrusion Detection System (NIDS), which detects hackers' attacks on network and handles them properly However, the performance of current intrusion detection system cannot catch the increasing rate of the Internet speed because most of the NIDSs are implemented by software. In this paper, we propose a new high performance network intrusion using Network Processor. To achieve fast packet processing and dynamic adaptation of intrusion patterns that are continuously added, a new high performance network intrusion detection system using Intel's network processor, IXP1200, is proposed. Unlike traditional intrusion detection engines, which have been implemented by either software or hardware so far, we design an optimized architecture and algorithms, exploiting the features of network processor. In addition, for more efficient detection engine scheduling, we proposed task allocation methods on multi-processing processors. Through implementation and performance evaluation, we show the proprieties of the proposed approach.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1B
• /
• pp.80-86
• /
• 2003

High speed networking applications like video-on-demand require the support of switches that can handle very high multicast loads. Switches studied in the past can support multicast loads of 25${\sim}$30% To overcome this limitation, Tandem Expanded Delta Network(TEDN) multicast switch was proposed to support more higher multicast load by 85${\sim}$90% without degradation in the performance But there is tremendous routing capacity that is not used in the series of routing network blocks. This paper presents modified TEDN multicast switches to save the excessive routing capacity. by recirculating packets in last routing network, we can achieve the acceptable packet loss ratio with the smaller number of routing network blocks. Extensive simulations show that our proposed switches have the acceptable packet loss ratio with reduced hardware cost.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.137-144
• /
• 2007

Advances in networking technology digital media, and codecs have made it possible for the Internet evolves into a Broadband convergence Network (BcN) and provides various services including Voice over Internet Protocol (VoIP) and IPTV over their high-speed IP networks. In order for the Internet to make a profit as traditional Public Switched Telephone Network (PSTN), it must provide high qualify VoIP services. Therefore, real time qualify measurement framework is the most important requisite to provide VoIP service. For this, IETF (Internet Engineering Task Force) defined RTCP-Extended Reports (RTCP-XR) that extend RTCP (Real-Time Transport Protocol Control Protocol). However, procedure and method tot actually VoIP qualify measurement did not recommended nothing but defined item to measure voice quality. Our objective in this paper is to describes a practical measuring framework for end-to-end QoS of switched voice packet in an IP environment. It includes concepts as well as step-by-step procedures for measuring packetized voice streams. It also proposes new formats that extend RTCP-XR's concept.

• Journal of radiological science and technology
• /
• v.28 no.2
• /
• pp.129-135
• /
• 2005

IT communication industries of current society are developed in enormous growth, our country leading the world in the number of super high speed internet equipments in use. In the pride oneself on communication network of those, mobile terminal technology and wireless phone production hold a high rank. Data communication and networking may be the fastest growing technologies in our culture today. In this way, IT fields conjugated in the daily quick, the fact that department of radiological science didn't discharged one's duties on current IT education. The curriculum of radiological technologists that play an important part between skill and occupation's education as major and personality didn't performed one's part most effectively on current IT environments and digital radiological equipments interface. Therefore, in this paper current curriculum of radiological science are catched hold of trend and problems on digital radiology environments, on fact the present state of problems, for radiological engineering and HIS manager, new curriculum course are suggested a reform measure of culture and major education curriculum introduction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.430-441
• /
• 2006

As the various A/V devices and home networks are delivered to users, home networks are changing to an entertainment network. It is expected that the required network bandwidth and the amount of usage of media content in home entertainment networks will be increased. Although the access networks and home networks becoming a high speed network, there remains the problems for QoS-guaranteed media content transfer in home networks. Also, in the home network, there can be network traffic caused by applications like video conferencing, video telephone, and VoIP(voice over IP) as well as inner network traffic of home network. Since media content transfer requires the real-time delivery, it is very important and basic requirement that is to transfer media content to A/V device user wants while keeping the media quality. Even though there are many middleware protocol for home networking, they provide basic device discovery and control or simple functions for QoS-guaranteed media content transfer that are not enough to provide QoS-guaranteed media transfer service that user wants. Thus, in this paper, we propose the technique based on UPnP(universal plug and play) protocol for QoS-guaranteed media content transfer in the home network. The proposed technique is compatible with UPnP and can be used with UPnP as additional functions. In this paper, we utilize VideoLAN application to verify the proposed technique. We add the additional modules that support the proposed technique's function to VideoLAN and we verify the its functions through various test scenarios.