• 한국구조물진단유지관리공학회 논문집
• /
• 제23권1호
• /
• pp.63-70
• /
• 2019

고속도로 통행량 및 주행속도 증가로 인해 중앙분리대 충돌사고가 빈번히 발생하고 있다. 특히 차량의 대형화와 통행 중차량의 증가로 인해 중앙분리대 충돌사고 시 중앙분리대의 방호 성능을 초과하는 사고 역시 증가하는 추세이다. 따라서 고속도로의 안전성을 높이기 위해 고성능 중앙분리대의 개발이 필요하다. 본 논문은 고성능 중앙분리대 설치 필요에 따라 성능개선수준(하중모델) 및 설치위치 제안을 목적으로 하고 있다. 이를 위해 고속도로 중앙분리대 충돌 사고 자료 분석을 통해 고성능 중앙분리대 개발을 위한 성능 개선 수준 SB6등급(충격도 = 420 kJ, 하중: 25 ton, 충돌속도: 80 km/h, 충돌각도: $15^{\circ}$)으로 제안하고 운전자의 운전행태 분석을 통해 개량 및 신설 고성능 중앙분리대 설치 위치를 제안하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.610-630
• /
• 2020

A large number of people suffered from traffic accidents each year, so people pay more attention to traffic safety. However, the traditional methods use laser sensors to calculate the vehicle distance at a very high cost. In this paper, we propose a method based on deep learning to calculate the vehicle distance with a monocular camera. Our method is inexpensive and quite convenient to deploy on the mobile platforms. This paper makes two contributions. First, based on Light-Head RCNN, we propose a new vehicle detection framework called Light-Car Detection which can be used on the mobile platforms. Second, the planar homography of projective geometry is used to calculate the distance between the camera and the vehicles ahead. The results show that our detection system achieves 13FPS detection speed and 60.0% mAP on the Adreno 530 GPU of Samsung Galaxy S7, while only requires 7.1MB of storage space. Compared with the methods existed, the proposed method achieves a better performance.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.253-256
• /
• 2005

The use of satellite remote sensing in maritime safety and security can aid in the detection of illegal fishing activities and provide more efficient use of limited aircraft or patrol craft resources. In the area of vessel traffic monitoring for commercial vessels, Vessel Traffic Service (VTS) which use the ground-based radar system have some difficulties in detecting moving ships due to the limited detection range. A virtual vessel traffic control system is introduced to contribute to prevent a marine accident such as collision and stranding from happening. Existing VTS has its limit. The virtual vessel traffic control system consists of both data acquisition by satellite remote sensing and a simulation of traffic environment stress based on the satellite data, remotely sensed data. And it could be used to provide timely and detailed information about the marine safety, including the location, speed and direction of ships, and help us operate vessels safely and efficiently. If environmental stress values are simulated for the ship information derived from satellite data, proper actions can be taken to prevent accidents. Since optical sensor has a high spatial resolution, JERS satellite data are used to track ships and extract their information. We present an algorithm of automatic identification of ship size and velocity. This paper lastly introduce the field testing results of ship detection by RADARSAT SAR imagery, and propose a new approach for a Vessel Monitoring System(VMS), including VTS, and SAR combination service.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.444-449
• /
• 2001

There have been many accidents of passenger ships on the sea and they have caused a big loss of human lives. Maritime Safety Committee(MSC) of International Maritime Organization(IMO) made evacuation analysis of Ro-Ro passenger ships mandatory in order to save as many lives as possible at the time of accident. But this is a temporary regulation and HSC/IMO ties to introduce a performance-based regulation to improve the effect of regulation. Simulation-based evacuation analysis is the basis of performance-based regulation. In this paper, we performed a simulation-based evacuation analysis on a passenger ship, which is usually used in the plying between land and islands in Korea, with EXODUS system. Through inspecting the results from this analysis in more detail, we can make a proposal to improve the safety of passenger ship. Finally we describe the features of IMEX(Intelligent Model for Extrication Simulation), a new evacuation model being developed in KRISO.

• Structural Monitoring and Maintenance
• /
• 제2권1호
• /
• pp.65-75
• /
• 2015

Among the destruction instances of half-through arch bridges, the shorter hangers are more likely to be ruined. For a thorough investigation of the hanger system durability, we have studied vehicle impact effect on hangers with vehicle-bridge coupling method for a half-through concrete-filled-steel-tube arch bridge. A numerical method has been applied to simulate the variation of dynamic internal force (stress) in hangers under different vehicle speeds and road surface roughness. The characteristics and differences in impact effect among hangers with different length (position) are compared. The impact effect is further analyzed comprehensively based on the vehicle speed distribution model. Our results show that the dynamic internal force induced by moving vehicles inside the shorter hangers is significantly greater than that inside the longer ones. The largest difference of dynamic internal force among the hangers could be as high as 28%. Our results well explained a common phenomenon in several hanger damage accidents occurred in China. This work forms a basis for hanger system's fatigue analysis and service life evaluation. It also provides a reference to the design, management, maintenance, monitoring, and evaluation for this kind of bridge.

• Archives of Reconstructive Microsurgery
• /
• 제9권1호
• /
• pp.80-87
• /
• 2000

Acute high speed accidents that results in full thickness skin defect and exposure of tendon, nerve, vessel and periosteum over denuded bone demands soft tissue coverage. Exposed bone often ensues chronic infection and requires free flap transplantation which surely covers defects in one stage operation and enhances transport of oxygen-rich blood and converts a non-osteogenic or partially osteogenic site into a highly osteogenic site, but exposed bone which had performed free flap transplantation sometimes necroses and needs secondary bone procedure. Scar contracture limits joint motion should be excised and covered with normal soft tissue to restore normal range of motion. Authors have performed the large latissimus dorsi myocutaneous free flap in 8 cases of extensive soft tissue defect and exposed bone lesion in the leg and 1 case of the flap was failed. The secondary ilizarov bone procedure was performed in 3 of 8 cases. 2 cases of large burn scar contracture and 1 case of posttraumatic scar contracture in lower extremity were restored with the large latissimus dorsi myocutaneous free flap. Authors concluded that large latissimus dorsi myocutaneous free flap is the most acceptable microvascular procedure in large soft tissue defect combined with exposed periosteum and bone requiring secondary bone procedure and in large burn scar contracture limiting knee joint motion.

• 한국화재소방학회논문지
• /
• 제22권4호
• /
• pp.70-75
• /
• 2008

최근 들어 철도차량 안전과 관련하여 국내에서 다양한 연구가 진행되고 있다. 하지만 대부분의 연구는 여객을 수송하는 일반 객차, 전동차, 고속열차 등을 중심으로 행해지고 있으며, 화물 특히 위험물 수송 화물차량에 대한 연구는 전무한 실정이다. 본 연구에서는 위험물질을 수송하는 탱크차의 안전기준을 개발하기 위하여 유류를 중심으로 국내외 관련된 안전기준을 비교 분석하여 국내 위험물 수송 탱크차 안전기준 개발의 기초를 마련하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.244-246
• /
• 2004

Compared with other transport means, safety and timeliness are the merits of railways. Unexpectedly when accident happens, much time and human strength are required to cope with the accident. And for swift recovery, systematic rehabilitation is needed. Recently using MTS(Moving picture Transmission System), we can perform accident rehabilitation and recording work efficiently. MTS is the device that transmits continuous picture information from accident field to control center. We are developing the appropriate system to railway situation to make use of the existing information communication technology, processing technology of video-tex, super high speed transmission technology through fiber-optic, copper cable and network description of information Technology, etc. If these communication-based can technologies are applied to railway system, railway managers can control the accident by inspecting the picture of accident field and can contribute to the safe train operation and the improvement of railway management. In this paper, we investigate the connecting methods when optical fiber is used for moving picture data transmission of train accidents, and its problems. And, we validate MTS's performance through about 28km section of field test.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.1-10
• /
• 2012

Recently, we have witnessed the definitely negative impacts of large-scale accidents happened in such areas as atomic power plants and high-speed train systems, which result in increased fear for the potential danger. The problems appear to arise due to the deficiency in the design of large-scale complex systems. One of the causes can be attributed to the design process that does not fully reflect the safety requirements in the early stage of the system development because of the substantially increased complexity. In this paper, to enhance the systems safety an integrated process is studied, which considers simultaneously both the system design process and system safety process from the beginning of the system development. In the conceptual system design phase an integrated process model is constructed by analyzing the activities of both the system design and safety processes. As a case study example, an inner city train system is described with the application of the developed process. The computer simulation of the example case is followed by the result discussed. The results obtained in the paper are expected to be the basis for the future study where a detailed process and its associated activities can be developed.

• Nuclear Engineering and Technology
• /
• 제26권2호
• /
• pp.257-264
• /
• 1994

원자력발전소 중대사고시 용융된 노심과 잔류냉각수가 증기폭발을 일으켜 원자로 격납용기의 건전성을 위협할 수 있다. 본 연구에서는 증기폭발을 모사할 수 있는 실험 장치를 제작하고, 물과 프레온을 사용하여 증기폭발실험을 수행하였다. 이때 고속카메라를 사용하여 폭발현상을 관측하였고, 동압측정기와 압력분출관을 이용하여 생성되는 폭발압력과 기계적인 에너지를 계측하였다. 이를 토대로 증기폭발의 중요인자들(물의 온도, 물의 주입속도, 물의 주입 시간, 그리고 냉매의 깊이)에 대한 민감도 분석을 수행하였다. 그리고, 압력용기 바닥의 구조물이 용융/냉각재의 반응에 미치는 영향을 살펴보기위하여 실험용기 내부에 그리드를 설치하여 폭발실험을 실시하였다. 물/프레온의 폭발실험에서 계측된 기계적에너지를 이용한 에너지효율은 0.5∼l.6%인 것으로 계산되었다.