• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.95-102
• /
• 1999

Because a driver is located in the front end of KHST, he is most likely to be insured at collision accidents. So, it is very important to design some survival space for the driver. To evaluate the driver's safety of KHST (Korean High Speed Train), the front structure of power car is analysed using PAMCRASH under the SNCF accident scenario(collision against a movable rigid mass 15 ton at 110㎞/h). Because the driver's cab of KHST is a modified version of TGV-K, which is not so strong as to protect him, it turns out to be inadequate to guarantee his survival space. Therefore it is recommended to redesign the driver's cab in a crashworthy point of view like the case of TGV-Duplex or NEC.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.20-27
• /
• 2012

Mechanical seals are one of main components of high speed centrifugal pumps. So, it is very important to detect the faults (scratch, notch, indentation, wear) of mechanical seals since the damage of seal can cause a critical failures or accidents of machinery system. In the past, many researchers mainly performed to detect the seal fault using the time signals measured from sensors. Recently, studies are focused on the development of on-line real time monitoring system. But study on the feature parameters used for fault detection of mechanical seals has a little been performed. In this paper, we showed feature parameters extracted from accelerated and acoustic signals by using the discrete wavelet transform (DWT), alpha coefficient, statistical parameters. And also verified the possibility for fault detection of mechanical seal.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.190-195
• /
• 2008

Surge proof equipment is an installation to make surge flow on the ground promptly so as to reduce surge-related damage on infrastructure, not to prevent surge from falling down on infrastructure directly. Compared with classical line individual earth, High speed line common earth has higher surge characteristic and plays a significant role to prevent infrastructure damage and injuries from surge, or short circuit accident between 25kV catenary and rail. In this paper, we analyzed the case of accident that caused communication/signaling system impaired while a tractor crossing level crossing at Honam line; in addition, we examined the accident reduction measures to minimize injury and property damage from cutting accidents with respect to common earth network.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.915-919
• /
• 2012

In constructing all kinds of equipment and steel structure, parts with discontinuities such as weld defects formed in the welded structure can generate fatigue cracks that results in damage or accidents. In this study, weld zones are investigated with X-rays and the latent images are put on film. Weld zone defects can be verified by developing the film. As weld defects are investigated by radiographic testing and correlated with the welding condition, more appropriate welding conditions can be found. According to the result of X-ray radiographic inspection of butt welding ATOS 80 high-strength steel with a thickness of 12mm, the best conditions for welding without creating weld defects are 4 weld-passes, a protective gas of 20% $CO_2$ and 80% Ar, a protective gas flow of 20L/min, a welding current of 200A, an arc voltage of 24V, a welding speed of 14.4cm/min, a welding rod angle of $50^{\circ}$, a welding gap of 5 mm with a ceramic base, and sand pre-heating to $160^{\circ}$ Celsius prior to welding.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2008년도 국제학술회의
• /
• pp.249-260
• /
• 2008

철도터널에서의 화재사고는 도로터널에 비하여 사고발생률은 낮지만, 일단 터널내에서 화재사고가 발생하면 대형 참사로 이어질 가능성이 높다. 특히, 고속철도터널은 일반철도터널에 비하여 선형 등의 제약조건으로 인한 터널의 장대화로 터널내 화재사고 발생시 대피승객의 이동거리가 증대될 수 있다. 터널내 화재사고 발생시 승객의 대피안전성을 증대시키고자 국토해양부에서는 "철도시설안전기준에 관한 규칙(2005년 10월 27일)"과 "철도시설 안전세부기준(2006년 9월 22일)"을 고시, 연장 1km 이상의 모든 신규터널에 대하여 안전성분석을 수행하여 방재계획을 수립토록 하였으며, 이후 모든 철도터널 설계시에 정량적 위험도 분석(Quantitative Risk Analysis)에 의한 안전성 분석을 수행하고 있다. 그러나, 정량적 위험도 분석에 필수적인 사고시나리오, 화재강도, 사고빈도 추출, 분기비 등에 대한 세부 기준이 아직 미비하여 철도터널방재설계에 어려움이 있어 기존 법규의 요구사항을 우선 만족시키고, 추가로 안전을 향상시키기는 방향으로 진행되고 있다. 이에 본 논문에서는 호남고속철도 터널방재설계를 위한 정량적 위험도 분석 세부기준 수립 및 실행가능한 합리적인 수준의 터널방재설계 방안을 제시하고자 한다.

• 한국ITS학회 논문지
• /
• 제17권6호
• /
• pp.54-66
• /
• 2018

본 연구에서는 고속도로 졸음쉼터의 진 출입 차량 주행속도 조사를 통해 졸음쉼터 가 감속차로 길이, 설치위치의 종단경사 및 곡선반경이 주행차량에 미치는 영향을 분석하였다. 또한, 졸음쉼터 적정 가 감속차로 길이 산정을 위해, VISSM을 활용하여 진출입부 길이 별 시나리오를 구축하고, 가 감속차로를 이용하는 차량의 개별차량 주행궤적 자료를 추출하여 차량의 감속 및 가속도의 표준 편차를 산출하였다. 주행속도 조사 결과 졸음쉼터 설치위치의 곡선반경 및 종단경사에 따른 속도차이가 있는 것으로 나타났으며 무엇보다 가 감속차로 길이에 따른 차량 간의 속도차이가 크게 나타났다. 특히 가 감속차로 길이가 짧게 설치된 졸음쉼터의 경우 차량 간의 속도차이가 큰 것으로 조사되었으며 차량이 졸음쉼터 진입 시 충분히 감속을 하지 못하고 진입하거나 졸음쉼터 이용 후 본선 진입 시 충분히 가속을 하지 못한 채로 본선에 진입하는 것으로 조사되어 위험성이 높은 것으로 분석되었다. 가 감속차로 길이에 따른 시뮬레이션 분석결과 진입부의 경우 245m 이상의 감속차로 길이 확보가 필요할 것으로 분석되었으며, 가속차로의 경우 370m 이상으로 설치하였을 때 안전한 진출이 가능한 것으로 분석되었다.

• 한국ITS학회 논문지
• /
• 제22권2호
• /
• pp.164-181
• /
• 2023

낮은 제한속도 환경에서 무인 교통단속 장비의 속도위반 단속 허용범위는 매우 높으며. 이는 제한속도 준수율이 낮은 주요인 중 하나이다. 이에 따라 본 연구에서는 무인 교통단속 장비의 속도위반 허용범위를 개선하여, 새로운 제한속도별 허용범위 기준을 제시하였다. 먼저 운전자에게 과속을 유발할 수 있는 운영자·이용자 측면의 오차 실효성을 분석하고, 분석 결과에 따라 단속 장비 오차와 내비게이션 GPS 속도 오차를 적용하여 허용범위 개선안을 제시하였다. 또한, 허용범위 개선 시 운영자 측면에서 장기적으로 기대되는 사고율 및 사고 심각도 등 안전성 효과를 추정하였다. 추정 결과 모든 제한속도의 도로구간에서 제한속도 준수율, 사고율, 속도 변화에 따른 심각도별 사고건수 변화율, 보행자 교통사고 사망률 모두 개선되었다. 따라서 본 연구에서 제시한 속도위반 단속 허용범위 개선안이 도입될 경우, 추정한 개선 효과와 같이 도로의 안전성이 향상될 것으로 기대된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1011-1016
• /
• 2015

Gas piping systems in power plants and factories are always influenced by the mechanical vibrations of rotational machines such as pumps, blowers, and compressors. Unusual vibrations in a gas piping system influence possible leakages of liquids or gases, which can lead to large explosive accidents. Real-time measurements of unusual vibrations in piping systems in situ prohibit them from being possible leakages owing to the repeated fatigue of vibrations. In this paper, a non-contact 3-dimensional measurement system that can detect the vibrations of a solid body and monitor its vibrational modes is introduced. To detect the displacements of a body, a stereoscopic camera system is used, through which the major vibration types of solid bodies (such as X-axis-major, Y-axis-major, and Z-axis-major vibrations) can be monitored. In order to judge the vibration types, an artificial neural network is used. The measurement system consists of a host computer, stereoscopic camera system (two-camera system, high-speed high-resolution camera), and a measurement target. Through practical application on a flat plate, the measured data from the non-contact measurement system showed good agreement with those from the original vibration mode produced by an accelerator.

• 디지털산업정보학회논문지
• /
• 제10권1호
• /
• pp.73-79
• /
• 2014

In this study, the unmanned vehicle to develop a preliminary step, we were facilities for Automated Guided Vehicle (AGV) simulator is designed and implemented. Industry is increasingly the more advanced automation and management systems need to be efficient. These studies are at least 24-hour continuous unmanned vehicles and personnel can result in reduction of labor costs. In addition, safety accidents can be minimized in the industry as an effect of intelligent AGV is essential. This study is the initial step for the development of AGV. manufactured simulator to Simulation and drives the performance of the system is evaluated. The configuration of the simulator, ultrasonic sensors, infrared sensors, and using the obstacle were to follow a given path. In addition, two-way communication between the host computer and the main processor that was. communication method that IEE802.11 meets the standard is applied to high-speed wireless LAN systems, each of the sensor information is calculated. AGV having a drive shaft 4 of the four wheels are respectively independent structure. AGV's main processor is driven using a high-performance DSP, and the controller controls the steering device of the load could be significantly reduced.

• 선박안전
• /
• 통권28호
• /
• pp.36-45
• /
• 2010

While the vessel become bigger and high speed, navigational passages become narrow due to an enlargement of all sorts of new ports, sea-crossing bridges and anchorages, leading to the high probability of marine accidents. Furthermore, a constant increase in the maritime transportation and the traffic volume on the sea led to a variety of sea traffic environments and it is a trend for the demand for the sea transportation environment to increase steadily. At this point of time, the Ministry of Land, Transport, and Maritime Affairs introduced the Korea Maritime Safety Laws evaluating the degree that The Safety Audit System for maritime transport, which evaluates the degree that all kinds of port facilities installed temporarily or installed into navigational passages, and the installations and repair constructions of S.O.C. facilities affect ships' traffic safety, was introduced through Korea Maritime Safety Laws and went into effect from November 28th, 2009. This study was performed to introduce an outline including the concept and purpose of the Maritime Safety Audit(MSA) system for maritime transport and the technological guidelines for scientific and standardized enforcement, thereby analyzing the system.