• 한국전자통신학회논문지
• /
• 제14권3호
• /
• pp.519-528
• /
• 2019

현재의 브레이크 시스템은 운동에너지를 열에너지로 변경하여 거의 마찰형 브레이크로 공기 중에 발산하여 제동한다. 시스템 내에는 제동력을 발생시키는 리타더라는 장치가 있다. 전기에너지의 소모를 절약하기 위해 리타더의 제동에너지 일부를 활용하는 리타더의 고속 응답 특성에 관한 고도기술 연구는 이미 선진국에서 진행 중이다. 본 논문에서는 배터리 충전을 위해 리타더에서 발생한 3상 전압을 24V 직류 전압으로 변환하고 실험을 통해 타당성을 검증하는 DC-DC 컨버터를 제안한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.608-611
• /
• 2001

This paper is indicating the problems, which are the conduction loss on the high frequency transformer, the protection of rectification diode as the snubber loss and the stress of switching main devices, as be made high current and high speed in the phase-shift switching full-bridge DC-DC converter is used the power supply's main circuit of high capacity. In this paper, to improve those problems, it is proposed that is the resonant circuit auxiliary can be reduced conduction losses and stabilized output control. And, it is constructed prototype of the power supply as the result of computer simulations.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.409-413
• /
• 2001

This paper presents a comprehensive study result on reducing commutation torque ripples generated in brushless dc motor drives with only a single dc-link current sensor provided. In brushless dc motor drives with only a single current sensor, the commutation torque ripple suppression that is practically effective in low speed as well as high speed regions has not been reported. A proposed commutation compensation technique based on deadbeat dc-link current controller takes a closed loop control scheme and a parameter insensitive property. The proposed control method is verified through simulations and experiments.

• 조명전기설비학회논문지
• /
• 제25권6호
• /
• pp.9-17
• /
• 2011

The high-power LED (Light Emitting Diode) which is recently gaining popularity as a digital light source has such advantages as low power consumption, long life, fast switching speed, and high efficiency. Thus, many efforts are being made to use the high-power LEDs for general lighting. This paper proposes LED driving circuit uses a DC/DC converter that can recover energy to compensate for the current variations caused by changes in LED equivalent resistance following a temperature change instead of serial resistance. The maximum input voltage of this DC/DC converter has low voltage variations by temperature change when the rated current is formed. In order to return current to the input side, we need a high boosting at low power. Thus, to improve the low efficiency of power converter, the power converter can be configured in such a way to gather the powers of low-capacity DC/DC converters and return the total power. Experiments showed that the proposed system improved efficiency compared to the conventional LED drive using the existing DC/DC converter.

• 한국정보통신학회논문지
• /
• 제17권9호
• /
• pp.2041-2047
• /
• 2013

본 논문에서는 DVB-S2 기반 고속 LDPC 복호를 위한 알고리즘을 제안하였다. 체크 노드 연산중에 비트 노드 연산을 수행하여 기존의 LDPC 복호 알고리즘에 비해 반복횟수를 줄일 수 있는 horizontal shuffle scheduling 알고리즘을 기반으로 하여 복호 속도를 보다 고속화 할 수 있는 알고리즘을 제안하였다. 기존의 체크 노드 연산은 하나의 메모리에서 값을 가져오기 때문에 체크 노드 연산과정에서 많은 지연이 발생 하는데 이를 row weight의 개수인 dc개의 병렬구조로 설계함으로써 체크 노드 연산과정의 지연을 줄일 수 있고 따라서 고속 복호가 가능하다. 이를 DVB-S2에 제시되고 있는 다양한 부호화율에서 dc개의 분리 할 수 있는 최대의 메모리를 제시하고 전송률을 제시하였다.

• 전력전자학회논문지
• /
• 제26권4호
• /
• pp.263-270
• /
• 2021

Active AC/DC converters with PWM operation are utilized to regulate rectified DC bus voltage of a permanent magnet synchronous generator in the maritime DC power system. A DC bus voltage regulation strategy that exploits the six-step operation is proposed in this study. Compared with that of the PWM operation, switching loss of the converter can be significantly reduced under the six-step operation. Moreover, conduction loss can also be reduced due to the high modulation index and reduced flux-weakening current of the six-step operation. A controller is used for the proposed DC bus voltage regulation strategy to verify its validity with the simulation and experimental setup. The simulation and the experimental test results showed that the converter loss reduces to a maximum of 70% and 19%, respectively.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권1호
• /
• pp.47-54
• /
• 2004

A new high voltage DC power supply is proposed. The proposed power supply is constructed with several power converters connected in series. It is easy to obtain high DC voltage for the same structure of each power converter. The output DC power of the proposed power supply can be disconnected from the load within several hundred microseconds at the instant of a load short-circuit fault. The rising time of the output DC voltage is also as small as several hundred microseconds, and there is no overshoot of the voltage because all of the output filter capacitors keep undischarged state even in load short-circuit condition. Therefore, the proposed scheme is suitable for the protection of frequent output short-circuit and fast on/off switching of output DC voltage. The proposed power supply has improved features such as simple structure, high power factor, and reduced size and volume compared with the conventional schemes. The operating principle is described and the validity of the proposed scheme is proved through simulations and experiments.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.6-10
• /
• 2000

In this paper a methodology for designing a controller based on inverse dynamics for speed control of DC motors is presented. The proposed controller consists of a low-pass prefilter the inverse dynamic model of a system and the PI controller. The low-pass prefilter prevents high frequency effects from the inverse dynamic model. The model is characterized by a nonlinear friction model. The PI controller regulates the error between the set-point and the system output which is caused by modeling error disturbances and variations f parameters. The parameters of the model and the PI controller are optimized offlinely by genetic algorithm. The experimental results on a DC motor system illustrate the performance of the proposed controller.

• 조명전기설비학회논문지
• /
• 제14권5호
• /
• pp.27-35
• /
• 2000

본 논문에서는 공진형 Full Bridge DC-DC 컨버터의 고효율 및 고밀도의 적류 안정화 전원장치의 전력제어를 위해서 스위칭 소자 대한 스위칭 손실 스위칭 스트레스를 줄이고, 가변입력에 대한 정상상태의 오차를 없애기 위해서 개선된 소프트 스위칭 방법인 디지털 I-PD 워상천이 제어기를 설계하여 적용하고자 한다. 공진형 FB DC-DC 컨버터에 대한 회로분석을 통한 모드별 소프트 스위칭 동작 특성을 해석하고, 질렬공진 등가회로로부터 이산시간계 상태방정식을 도출하며 입력에 대한 급변하는 error를 막고, 정성상태 오차없이 추종하도록 하는 디지털 I-PD형 제어기를 구성한다. 또한 고속의 소프트 스위청 공진혐 FB DC-DC 컨버터 제어기에 위해서 디지털 I-PD제어기에 위상천이 제어기를 부가하므로서 컨버터의 중량을 줄이고 스위치 소자의 스트레스가 경감되는 컨버터를 실현하였다.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.73-80
• /
• 1998

Recently, we have developed a linear brushless DC motor(LBLDCM) with high speed and precise position control performance to apply it to the semiconductor assembly and inspection machinery. It is composed of double side alignment by two armature-stator pairs and each pair is consist of a moving armature with 8 poles by 3 phase coils and a stator with rare earth permanent magnet (Nd-Fe-B) arrays. Through the thrust force analysis on a simplified and whole model of the suggested LBLDCM by an Electromagnetic FEM solver, skew angle of magnet arrays to reduce the thrust force ripple and the winding conditions of the armature is designed. From experimental results, the user's requirements was satisfied and we confirmed distinctly that the repeatable accuracy less than a micron of the linear motion can be obtained at high speed by the developed LBLDCM. This is owing to directly drive the work without the gear train.