• Child Health Nursing Research
• /
• 제22권2호
• /
• pp.153-162
• /
• 2016

Purpose: It is critical that evidence from research is applied to everyday nursing practice to improve the quality of care and health outcomes. Aims of this study were to review high-risk infant related studies published in major nursing and non-nursing journals in Korea and to assess the quality of intervention studies. Methods: Through the Korean literature search engine of RISS.KR the authors identified 132 studies, and two researchers evaluated each of these studies using the analysis criteria. The quality of intervention studies was assessed using the van Tulder Scale. Results: Among the studies, 40.2% were either thesis or dissertation and 86.4% were quantitative studies. Convenience sampling was the most commonly used sampling method. All experimental studies were quasi-experiment except one pre-experiment study. Sensory stimulation and kangaroo care were the most common interventions for high-risk infants. Over half of the intervention studies were assessed to be "low risk of bias" but both randomization and blinding processes were not adequately satisfied in most of the studies. Conclusion: Findings of this study suggest that high-risk infants are more likely to be recruited for experimental studies but types of interventions were very limited. To provide evidence-based care for high-risk infants, rigorously conducted experimental studies should be encouraged.

• 한국식생활문화학회지
• /
• 제20권2호
• /
• pp.283-291
• /
• 2005

This study was peformed by questionnaire to investigate satisfaction for the menu qualify of Korean traditional food of Japanese tourists. The subjects of this study consisted of 280 Japanese tourists using the Gyeongju and Busan hotel. The results were summarized as follows: 63.9% of the subjects responded that frequency of visiting was 1-2 times a year and 42.1% responded that motivation of visiting was for tour and understanding of korea. Companion with friend scored high as 40.4%, and intention of revisiting was high on 'normal'. On overall satisfaction on korean traditional foods, 'satisfy' scored high as 43.2%. 61.1% of the subjects responded that the taste was the most important factor of food. On frequency of eating, 'over 8 times' scored high as 27.9%, and on motivation of eating, 'with visiting Korea' scored high as 48.2%. On satisfaction for the menu quality of korean traditional food, the highest item was 'taste(3.82 point)' and 'nutrition(3.82 point)', and but 'Japanese mark on menu(2.47 point)', 'Japanese mark on ingredient(2.61 point)' scored low. Overall satisfaction for korean traditional food had an effect on intention of revisiting, and therefore, improving the quality of the traditional food and the strategy for the classification of desires are earnestly requested.

• 한국축산식품학회지
• /
• 제36권5호
• /
• pp.583-593
• /
• 2016

The aim of this study was to investigate the effects of morphological characteristics of porcine muscle fibers on growth performance, muscle fiber characteristics, and pork quality taken from the longissimus dorsi muscle. A total of 239 crossbred pigs (164 castrated males and 75 females) were used in this study. Experimental pigs were categorized by the total number of muscle fiber (TNF: High and Low) and cross sectional area of muscle fiber (CSAF: Large, Middle, and Small). Their combinations were classified into six groups (High-Large, HL; High-Middle, HM; High-Small, HS; Low-Large, LL; Low-Middle, LM; Low-Small, LS). The TNF and CSAF were significantly (p<0.05) correlated with growth rate and carcass productivity, while the only of the type I number had no meaningful relationships excluding the correlation with loin area (p<0.001). The proportion of type I area was positively correlated with pH_{45 min} while the proportion of type IIB area was negatively correlated with pH_{45 min} and pH_{24 h} (p<0.05). Drip loss and protein denaturation had strong relationships with the proportion of type IIB number or area. The HL group exhibited the greatest growth performance. In addition, the HL group had significantly greater values in protein solubility than the other groups. In conclusion, this study suggest that high TNF combined to large CSAF improve the ultimate lean meat productivity and assure normal meat quality simultaneously with increased both proportion of number and area of type I, type IIA muscle fibers and lowered proportion of number and area of type IIB.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1637-1642
• /
• 2010

본 연구는 초슬림의 광학 시스템에 적용 가능한 서브 미크론의 패턴으로 구성된 고효율 회절 렌즈의 금형을 가공하는 방법에 관한 것이다. 서브미크론의 패턴으로 구성된 고효율 회절 렌즈를 가공하기 위해 분해능이 뛰어난 전자빔 노광장치와 고속 원자 빔 플라즈마 에칭 공정을 바탕으로 다중 정렬방식을 이용하였다. 다중 정렬 방식을 이용하여 고효율 회절 렌즈를 가공 하기 위해서는 정렬 오차, 노광 오차 그리고 에칭 오차를 최소화 해야만 한다. 본 연구에서는 이 주요한 세 가지 가공 오차를 최소화 하였으며, 이를 바탕으로 지름 $267\;{\mu}m$ (NA=0.25), 최소 선 폭 226 nm, 렌즈 두께 819 nm 를 가지는 고효율 회절 렌즈 가공을 실현 하였다.

• 보존과학연구
• /
• 통권20호
• /
• pp.21-47
• /
• 1999

According to damage of papers by the chemical cause, papers become to acidify. Among the 3 kinds of method measuring the acidity of paper, one was nondestructive method measuring the surface of the paper by flat type electrode and the others were destructive methods measuring directly by cold water extract method and hot water extract method. In case of the cellulolytic cultural properties, the latter methods were not applied because those methods must bedissociated papers. To measure the paper acidity nondestructively, we investigated the correlation of the nondestructive method and the destructive methods. The conclusions are as follows. 1) In the relationship of the cold water extract method and the hot water extract method, It was indicated that the pH measured by the hot water extract method was high quality printing paper 0.08, rough printing paper 0.13, and Korean paper 0.29 higher than that by the cold water extract method.2) In the relationship of the cold water extract method and the surface measurement method, It showed that the pH value measured by the cold water extract method was high quality printing paper 1.86, rough printing paper 0.80,and Korean paper 0.58 higher than value that by the surface measurement.3) In the relationship of the hot water extract method and the surface measurement method, It showed that the pH value measured by the hot ABSTRACT water extract method was high quality printing paper 1.78, rough printing paper 0.66, and Korean paper 0.29 higher than that by the surface measurement. From the above-mentioned results, the pH value measured by the surface measurement was need to high about 1.78∼1.86 in high quality printing paper, 0.66-0.80 in rough printing paper, and 0.29∼0.58 in Korean paper and the surface measurement with flat type electrode was very available to measure the acidity of Korean papers actually.

• 보존과학연구
• /
• 통권20호
• /
• pp.49-64
• /
• 1999

According to damage of papers by the chemical cause, papers become to acidify. Among the 3 kinds of method measuring the acidity of paper, one was nondestructive method measuring the surface of the paper by flat type electrode and the others were destructive methods measuring directly by cold water extract method and hot water extract method. In case of the cellulolytic cultural properties, the latter methods were not applied because those methods must bedissociated papers. To measure the paper acidity nondestructively, we investigated the correlation of the nondestructive method and the destructive methods. The conclusions are as follows. 1) In the relationship of the cold water extract method and the hot water extract method, It was indicated that the pH measured by the hot water extract method was high quality printing paper 0.08, rough printing paper 0.13, and Korean paper 0.29 higher than that by the cold water extract method.2) In the relationship of the cold water extract method and the surface measurement method, It showed that the pH value measured by the cold water extract method was high quality printing paper 1.86, rough printing paper 0.80,and Korean paper 0.58 higher than value that by the surface measurement.3) In the relationship of the hot water extract method and the surface measurement method, It showed that the pH value measured by the hot ABSTRACT water extract method was high quality printing paper 1.78, rough printing paper 0.66, and Korean paper 0.29 higher than that by the surface measurement. From the above-mentioned results, the pH value measured by the surface measurement was need to high about 1.78∼1.86 in high quality printing paper, 0.66-0.80 in rough printing paper, and 0.29∼0.58 in Korean paper and the surface measurement with flat type electrode was very available to measure the acidity of Korean papers actually.

• 한국동물생명공학회지
• /
• 제36권2호
• /
• pp.91-98
• /
• 2021

The objective of this study was to establish a selection process for high quality sperm in bovine semen using sperm separation by magnetic activation (MACS). For this, semen from 21 Nellore bulls was collected using an artificial vagina. To guarantee the presence of pathologies in the ejaculate, animals previously declassified in four consecutive spermiogram were used. Semen was analyzed in five statuses: (1) fresh semen (fresh); (2) density gradient centrifugation (DGC), percoll column; (3) non-apoptotic fraction after separation by MACS (MAC); (4) apoptotic fraction from the separation (MACPOOR); and (5) MAC followed by DGC (MACDGC). Using a computerized analysis system (CASA), motility was measured. The sperm morphology was evaluated by phase contrast, and the supravital test was completed with eosin/nigrosin staining. For DGC, 20 × 10⁶ cells were used in a gradient of 90% and 45% percoll. MACS used 10 × 10⁶ cells with 20 μL of nanoparticles attached to annexin V, and filtered through the MiniMACS magnetic separation column. Membrane integrity was assessed with SYBR-14/IP and mitochondrial potential with JC-1 by flow cytometry. Processing sperm by MACDGC, was more effective in obtaining samples with high quality sperm, verified by the total of abnormalities in the samples: 35.04 ± 2.29%, 21.50 ± 1.47%, 17.30 ± 1.10%, 30.68 ± 1.94% and 10.50 ± 1.46%, respectively for fresh, DGC, MAC, MACPOOR, and MACDGC. The subpopulation of non-apoptotic sperm had a high number of live cells (82.65%), membrane integrity (56.60%) and mitochondrial potential (83.98%) (p < 0.05). These findings suggest that this nanotechnological method, that uses nanoparticles, is efficient in the production of high-quality semen samples for assisted reproduction procedures in cattle.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제29권3호
• /
• pp.23-36
• /
• 2024

Miryang City, the study area, has a water supply rate of 87.4%, which is 12% lower than the national water supply rate of 99.4%, but has a high dependence on groundwater due to the high ratio of farms. In agricultural areas, contamination becomes relatively more critical, requiring significant attention to the management and conservation of groundwater resources. This study aims at estimate groundwater vulnerability of Miryang City using the DRASTIC index map, Piper diagram, and water quality data to correlated with the DRASTIC index. The results from DRASTIC map were divided into five classes: very high, high, moderate, low, and very low. The areas in central and southern part of study area, which are characterize by a very high index with [Ca-Cl] and [Na-Cl] water types, covering a large alluvium with the Miryang River and Nakdonggang River. In addition, a correlation analysis between groundwater quality parameters and the DRASTIC index was carried out. Chloride, sodium, and sulfate ions showed a weak relationship with DRASTIC index, with correlation coefficient was 0.507, 0.487 and 0.344, respectively. These results suggest that aquifer media, soil media, hydraulic conductivity, and chloride ion are important factors for groundwater vulnerability.

• 품질경영학회지
• /
• 제29권4호
• /
• pp.103-115
• /
• 2001

Manufacturing strategy deals with the issue that how manufacturing can achieve the organization's overall goals within the framework of corporate strategy. In this paper, manufacturing strategy and programs for high performance are examined in order to answer the following questions: What kinds of manufacturing strategies are adopted\ulcorner How many programs for high performance are introduced\ulcorner To what extent do the programs contribute to performance improvement\ulcorner What are the difference between the high performance and low performance groups\ulcorner From the survey data of 97 Korean manufacturing companies, answers to the questions are obtained and the implications are discussed.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.266-271
• /
• 2004

Recently, consumers require products with high-reliability and high-safety. Risk management system and product safety become more important issue In view of product liability. This paper aims to propose a risk assessment system which can be applied to product with high-reliability and high-safety, and also show an empirical application of the proposed risk assessment system for the development of motorcycle helmets.