• Journal of the Korean Institute of Educational Facilities
• /
• v.20 no.3
• /
• pp.29-39
• /
• 2013

This study addresses the evaluation on the satisfaction of school illumination quality by applying SERVPERF model after extracting factors affecting school illumination quality. Three types of illumination systems (fluorescence light, general LED light and high color rendition LED light) were tested by students who have used each illumination system. Three factors such as effectiveness, esthetic sense and function were developed for evaluation. Satisfaction evaluation was performed based on applied SERVPERF model by comparing perceived levels. The differences of perceived levels of satisfaction on the illumination systems were analyzed by ANOVA. The results said respondents satisfy only the high color rendition LED light regardless of three factors. Especially, students who experienced high color rendition LED light have strong intention to recommend that illumination system to other schools. They also express their desire to use that system at home. Interestingly, there is not much satisfaction difference between fluorescence light and general LED light.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.379-384
• /
• 1997

High quality MCM-41 is prepared from a gel of molar composition SiO2:0.20 CTACl:0.18 TMAOH:25 H2O aged at 20 ℃ for 24 hours before crystallization lasting for 48 hours. The (110) and (200) peaks of XRD pattern of high quality MCM-41 are unusually well resolved and the FWHM (full-width-at-half-maximum) of the (100) peak is 0.13° for as-prepared MCM-41 and 0.21° for calcined one, which indicate well-developed crystals. The properties of the crystal depend on the source and concentration of the reactants and the gel aging time. There is no induction period in the course of the synthesis, which is conveniently monitored by pH measurement. Gel aging, during which a spatial distribution of silicate polyanions and micellar cations is established, is essential for preparing high quality MCM-41. Surfactants with the same cationic organic group but different counteranions change the crystallization behavior. Highly basic gel (pH=12.6) favours the lamellar product; the quality of MCM-41 is lower as insufficient TMAOH is available to dissolve the silica.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.6
• /
• pp.2464-2479
• /
• 2020

This paper presents a detailed subjective quality assessment for the ultra-high definition (UHD) videos having frame rates of 30fps and 60 fps. The subjective assessment is based on the ITU-R BT-500 recommendations, where double stimulus continuous quality scale (DSCQS-type II) test is performed for the evaluation of the perceived quality of the user's in terms of differential mean opinion score (DMOS). Encoding of the UHD videos by opting encoders i.e. H.264/AVC, H.265/HEVC, and VP9 at five different quantization parameter (QP) levels is done to investigate the perceived user's quality of experience (QoE) given as DMOS. Moreover, the encoding efficiency as the encoding time for each encoder and qualitative performance by employing full-reference (FR) quality metrics are presented in this work.

• Journal of the Korea Safety Management & Science
• /
• v.1 no.1
• /
• pp.123-134
• /
• 1999

There are several models for process quality assurance by quality system (ISO 9000), process capability analysis, acceptance control chart and so on. When a high level process capability has been achieved, it takes a long time to monitor the process shift, so it is sometimes necessary to develop a quicker monitoring system. To achieve a quicker quality assurance model for high-reliability process, this paper presents a model for process quality assurance when the fraction nonconforming is very small. We design an acceptance control chart based on variable quality characteristic and time-censored accelerated testing. The distribution of the characteristics is assumed to be normal or lognormal with a location parameter of the distribution that is a linear function of a stress. The design parameters are sample size, control limits and sample proportions allocated to low stress. These paramaters are obtained under minimization of the relative variance of the MLE of location parameter subject to APL and RPL constraints.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.247-257
• /
• 1999

There are several models for process quality assurance by quality system(ISO 9000), process capability analysis, acceptance control chart and so on. When a high level process capability has been achieved, it takes a long time to monitor the process shift, so it is sometimes necessary to develop a quicker monitoring system. To achieve a quicker quality assurance model for high-reliability process, this paper presents a model for process quality assurance when the fraction nonconforming is very small. We design an acceptance control chart based on variable quality characteristic and time-censored accelerated testing. The distribution of the characteristics is assumed to be normal of lognormal with a location parameter of the distribution that is a linear function of a stress. The design parameters are sample size, control limits and sample proportions allocated to low stress. These parameters are obtained under minimization of the relative variance of the MLE of location parameter subject to APL and RPL constraints.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.197-200
• /
• 2004

The increase of the use of recycled aggregate is necessary for the decrease of building waste, but it is not possible to use concrete because of the various range of quality. Therefore, the quality grade and application method of recycled aggregate should be prescribed before the site application so in that this study we investigated the effect of the quality of recycled aggregate on the compressive strength, resistance freezing and thawing. As results of this study, the compressive strength of recycled aggregate concrete used recycled aggregate, as if it had high quality recycled aggregate is similar or higher to that of crushed stone. Also, this high quality recycled aggregate affect the increase of resistance freezing and thawing.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.189-196
• /
• 1994

Quality assurance in the process of manufacturing high strengh bolt sets used in the frictional joints of structures in one of important concern to users as well as to manufactures. In case of occurrences of either defective or low-quality products, even if they are quite rare, some systematic means of localizing the cause-characteristics and matching to corresponding production process is necessary. Control chart of torque factor is the primary indicatir in finding defectiveness of the products. Use of correlation diagrams ofnhardness of the bolt set presents in part a way of screening the cause. Retest data of the bolt set provide additional ideas of localizing the cause, for which theoretical background is presented in this regard. A process-characteristics matrix relating the causes of low quality to the corresponding process of manufacturing, which is of prime importance for the feedback control of production, is also proposed. Finally general features of control to assure quality of the set is described.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.423-428
• /
• 1994

High strength concrete was placed at the mass concrete slabs, walls, pillars of RC building from August till August. And the construction is going on now. This paper presents mix design, production, quality control and experience with field application of high strength ready-mixed concrete under hot weathered conditions. It is shown to be possible to produce high strength concrete that has 45MPa compressive strength using superplasticizer and cement replaced with 20% fly-ash with appropriate control.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.201-202
• /
• 2022

In this study, the high performance silicone was developed to assure the inter-layer joint in apartment house. The tensile strength, the elongation, the bond strength and the fatigue tests were conducted. As a result, it was confirmed that the performance of high -performance silicone was superior to the existing elastic paint. Therefore, it is expected that it will help to secure the quality of inter-layer joints in apartment houses.

• The Mathematical Education
• /
• v.59 no.3
• /
• pp.237-254
• /
• 2020

The current study investigated the relationships between mathematical knowledge for teaching and the mathematical quality in instruction in order to gain insight about teacher education for secondary teachers in South Korea. We collected and analyzed twelve high school teachers' scores of the multiple-choice assessment for mathematical knowledge for teaching developed by the Measures of Effective Teaching project. Their instruction was video recorded and analyzed with the mathematical quality in instruction developed by the Learning Mathematics for Teaching project. We also interviewed the teachers about how they planned and assessed their instruction by themselves in order to gain information about their intention and interpretation about instruction. There was a statistically significant and positive association between the levels of mathematical knowledge for teaching and the mathematical quality in instruction. Among three dimensions of the mathematical quality in instruction, mathematical richness seemed most relevant to mathematical knowledge for teaching because subject matter knowledge plays an important role in mathematical knowledge for teaching. Furthermore, working with students and mathematics as well as students participation were critical to decide the quality of instruction. Based on these findings, the current study discussed offering opportunities to learn mathematical knowledge for teaching and philosophy about how teachers need to consider students in high schools particularly in terms of constructivism.